• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.631-636
• /
• 2010

One experiment was carried out to investigate the soil chemical properties of bracken growth and the inorganic element contents of plant. To the results of soil analysis in native bracken (Pteridium aquilinum L.) growth, soil pH was 5.2, organic matter was 19 g $kg^{-1}$ and available phosphate was 20 mg $kg^{-1}$, and exchangeable potassium, calcium, magnesium were 0.32, 2.0 and 1.3 $cmol_c\;kg^{-1}$, respectively. In the bracken cultivation soil, pH was 5.7, organic matter was 13 g $kg^{-1}$ and available phosphate 367 mg $kg^{-1}$, and exchangeable potassium, calcium and magnesium were 0.81, 4.0 and 1.4 $cmol_c\;kg^{-1}$, respectively. The soil pH, available phosphate and exchangeable calcium were much lower in bracken native soil than those of cultivation soil, while organic matter was a little higher in native soil than that of cultivation soil. In native bracken plants, three major elements of nitrogen, phosphorus and potassium, were 4.40, 0.55 and 3.40%, calcium and magnesium were 0.22 and 0.32%, and microelements of iron (Fe), manganese (Mn), copper (Cu), zinc (Zn) and boron were 126, 210, 23, 75 and 11 mg $kg^{-1}$, respectively. In cultivation bracken, three major elements of nitrogen, phosphorus and potassium, were 5.50, 0.73 and 3.55%, calcium and magnesium were 0.17 and 0.28%, and microelement contents of iron (Fe), manganese (Mn), copper (Cu), zinc (Zn) and boron (B) were 120, 252, 19, 72 and 20 mg $kg^{-1}$, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.370-378
• /
• 2005

The characteristics of heavy metal biosorption on the seaweeds were investigated to develop a biological treatment technology for wastewater polluted with heavy metals. The heavy metal biosorption on seaweeds ranked in the tallowing order: U. pinnatifida$\geq$E. stolonifera$\geq$Laminaria sp.>G. amansii. The Pb was biosorbed in the range of $93{\sim}99%$, and the Cu and Cd were biosorbed in the range of $70{\sim}80%$ at the concentration of the heavy metal of $100mg/{\ell}$ respectively. The seaweed which was pretreated with $CaCl_2$ solution improved the biosorption of the heavy metals. The temperature and pH didn't affect the biosorption of heavy metals. The Langmuir isotherm reasonably fit the data of heavy metal biosorption compared to the Freundlich isotherm. The affinity of metals on the biosorption ranked in the following order: Pb>Zn>Cu>Cd. The biosorption efficiency of the heavy metals on the U. pinnatifida decreased in the multi-component rather than the single component. The heavy metals adsorbed on the U. pinnatifida were recovered using 0.3%-NTA. U. pinnatifida among the seaweed used in this work showed the best performance for the biosorption of the heavy metals.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.124-131
• /
• 1995

High resolution transmission electron microscopic observations on the $Hg_{1-x}\;Tl_{x}\;Ba_{2}(Ca_{0.86}\;Sr_{0.14})_{2}\;Cu_{3}\;O_{8+\delta}$(x=0.00, 0.25, 0.50, 0.75) were carried out using side-entry type TEM working at 300 kV. The TEM samples are prepared by powder method. The pellets are crushed in agatar motar and suspended in $CCl_4$, solution and scooped in holely carbon microgrid. The 1223 structures are observed in all samples with [010] zone axis. Except x=0.25 sample, the lattice parameter a and c tend to decrease as the thallium contents are increased ranging from 0.3936 nm to 0.3713 nm for a, and from 1.6131 nm to 1.5138 nm for c parameter. Those of x=0.25 sample are reduced too much, 0.3785 nm for a, 1.5375 nm for c. The sample with x=0.25 shows the intergrowth of 1223 and 1234 structure with the ratio of 19 to 1. As the thallium content increases, the structures become more stable without having any defect. The samples are damaged by electron beam irradiation during the observation, however the structure can endure longer as the thallium contents are increased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.923-929
• /
• 2010

This study was conducted to investigate the relations between soil chemical properties and Korean raspberry (Rubus coreanus Miq.) growth. Soils were collected from 54 sampling sites in 1 to 6 years old Korean raspberry cultivation fields (RCFs) at Gochang-gun, Jeollabuk-Do, Korea. In RCF with two to six years old plants, soil pH and exchangeable $Ca^{2+}$ and $Mg^{2+}$ contents were higher at the leaf-emergence time, but EC, available phosphorus content, CEC, and total nitrogen content were higher at the harvesting time; especially at the harvesting time, the content of available phosphorus in the RCF with 3~6 years old plants were at least three times higher than in the RCF with 2 years old plants. Water-soluble anions ($Cl^-$, ${NO_3}^-$, ${PO_4}^{2-}$, and ${SO_4}^{2-}$) in the RCF were also measured. The contents of ${NO_3}^-$ and ${SO_4}^{2-}$ were always higher in the RCF with older plants than in the RCF with younger plants, which were not affected by sampling time and sampling locations (rhizosphere and non-rhizosphere sites). However, soils collected from non-rhizosphere at the leaf-emergence time contained higher ${PO_4}^{2-}$ content, but $Cl^-$ content was higher in the soils collected from rhizosphere at the harvesting time. In general, soils in the RCFs contained excess amounts of inorganic nutrients such as available phosphorus and exchangeable $K^+$. Thus, optimal levels of soil properties for Korean raspberry cultivation should be reconsidered.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.160-165
• /
• 1999

Agarose gels can be used as reference standards for the measurement of fluid properties in porous media because the relaxation properties of the gel reference standard and those of the fluid in porous media can be closely matched. The use of reference standard to determine porosity and saturation is discussed and the requirements for gel NMR properties given. The relaxtion times of agarose gels measured at 2.0 Tesla are illustrated as a function of agarose and paramagnetic impurity ($CuSO_4$) concentrations. This work shows an empirical result between agarose gel composition and gel relaxtion times. The average value for the porosity distribution is 17.7%, which compares well with the value calculated with the gravimetric analysis. Finally, two phase immiscible displacement using agarose gels as a reference standard was performed. The saturation profiles appear to be consistent with what one might calculate for a one-dimensional displacement in a uniform porous media.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.317-323
• /
• 2018

Crystal structure of the $L1_2$ type $(Al,X)_3Ti$ alloy (X = Cr,Cu) is analyzed by X-ray diffractometry and the nonuniform strain behavior at high temperature is investigated. The lattice constants for the $L1_2$ type $(Al,X)_3Ti$ alloys decrease in the order of the atomic number of the substituted atom X, and the hardness tends to increase. In a compressive test at around 473K for $Al_{67.5}Ti_{25}Cr_{7.5}$, $Al_{65}Ti_{25}Cr_{10}$ and $Al_{62.5}Ti_{25}Cu_{12.5}$ alloys, it is found that the stress-strain curves showed serration, and deformation rate dependence appeared. It is assumed that the generation of serration is due to dynamic strain aging caused by the diffusion of solute atoms. As a result, activation energy of 60-95 kJ/mol is obtained. This process does not require direct involvement. In order to investigate the generation of serrations in detail, compression tests are carried out under various conditions. As a result, in the strain rate range of this experiment, serration is found to occur after 470K at a certain critical strain. The critical strain increases as the strain rate increases at constant temperature, and the critical strain tends to decrease as temperature rises under constant strain rate. This tendency is common to all alloys produced. In the case of this alloy system, the serration at around 473K corresponds to the case in which the dislocation velocity is faster than the diffusion rate of interstitial solute atoms at low temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1647-1652
• /
• 2010

A CdS film has been used as a window layer in CdTe and Cu(In,Ga)$Se_2$ thin films solar cell. Partial substitution of Zn for Cd increases the photocurrent and the open-circuit voltage by providing a match in the electron affinities of the two materials and the higher band gap. In this paper, CdZnS/CdTe and CdS/CdTe heterojunctions were fabricated and the electrical characteristics were investigated. Current-voltage-temperature measurements showed that the current transport for CdS/CdTe heterojunction was controlled by both tunneling and interface recombination. However, CdZnS/CdTe heterojunction displayed different current transport mechanism with the operating temperature. For above room temperature, the current transport of device was generation/recombination in the depletion region and was the leakage current and/or tunneling in the range below room temperature.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.849-853
• /
• 1999

In the study, superconducting properties of $Bi_2$-x(sub)$LSr_2$Ca(sub)1+x(sub)$LCu_2$O(sub)8+d (x(sub)L=0, 0.05, 0.1, 0.2) films prepared by the LPE method was investigated. The peak decompositions of Sr3d and Ca2p XPS spectra, together with the EPMA results, elucidated the occupancies of Bi, Sr and Ca atoms on the SrO- and Ca-layers. The lattice parameter c monotonically increased with increasing x(sub)L for $0\leq$x(sub)L$\leq$0.2. The superconducting critical temperature T(sub)c showed a maximum value around x(sub)L=0.1. The x(sub)L dependence of the superconducting critical temperature T(sub)c and the lattice parameter c are explained by the changes of the excess oxygens in the BiO-layer. Since distribution and deficiency of the atoms in SrO-layer have influenced on superconducting properties and crystal structure.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.849-860
• /
• 2010

A new $N_3O_2$ pentadentate ligand, N,N'-Bis(2-hydroxybenzyl)-ethylenetriamine(H-BHET 3HCl) was synthesized. The hydrochloric acid salts of Br-BHET 3HCl, Cl-BHET 3HCl, $CH_3O$-BHET 3HCl and $CH_3$-BHET 3HCl containing Br-, Cl-, H-, $CH_3O-$ and $CH_3-$ groups at the para-site of the phenol group of the H-BHEP were synthesized. The structures of the ligands were confirmed by C. H. N. atomic analysis and $^1H$ NMR, $^{13}C$ NMR, UV-visible and mass spectra. The calculated stepwise protonation constants(${\logK_n}^H$) of the synthesized $N_3O_2$ ligands showed six steps of the proton dissociation. The orders of the overall protonation constants($\log{\beta}_p$) of the ligands were Br-BHET < Cl-BHET < H-BHET < $CH_3O$-BHET < $CH_3$-BHET. The orders agreed well with that of para Hammett substituent constants(${\delta}_p$). The calculated stability constants($\logK_{ML}$) between the ligands and heavy metal ions (Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II)) agreed well with the order of the overall proton dissociation constants of the ligands but they showed a reverse order in para Hammestt substituent constants(${\delta}_p$). The order of the stability constants between the heavy metal ions with the synthesized ligands were Co(II) < Ni(II) < Cu(II) > Zn(II) > Cd(II) > Pb(II).

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.760-763
• /
• 2012

This study was conducted to investigate foliar treatment effects of organic agricultural materials for the environmentally-friendly cultivation of grape. The organic materials applied were chitosan, wood vinegar (pyroligneous acid), amino acid solution, and ginkgo leaf extract. All the organic materials were relatively strong acidic ranging lower than pH 4.6. when comparing with other organic materials, amino acid solution contained relatively high contents of selected plant nutrients, such as N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn. As comparison of selected soil properties in the grape cultivating field, soil pH values were lower at the harvest stage than at the first stage of grape growing (before treating the organic materials), and electrical conductivity (EC) and soil organic matter content were higher at the harvest stage in the all plots. The concentrations of available phosphorus increased in most of the plot soils except in control plot (conventional treatment). The concentrations of exchangeable K decreased in the plot treated with ginkgo leaf extract and the control plot. The exchangeable Mg concentrations decreased in soils of all the plots. On the other hand, the concentrations of N and K in the grape leaves were higher with the treatments of chitosan and amino acid solution, P concentrations were higher with the applications of chitosan, wood vinegar and amino acid solution, and Ca and Mg concentrations were higher with chitosan and amino acid solution treatments, respectively, than with others. The yields of grape were higher, $1,581{\sim}1,583kg\;10a^{-1}$, in the control and wood vinegar treatment plots than others. Sugar contents of grape were not different among all the plots.