• Korean Journal of Materials Research
• /
• v.17 no.12
• /
• pp.664-668
• /
• 2007

The magnetron sputtering was used to deposit Ni buffer layers on the polyimide surfaces to increase the adhesion strength between Cu thin films and polyimide as well as to prevent Cu diffusion into the polyimide. The Ni layer thickness was varied from 100 to $400{\AA}$. The adhesion strength increased rather significantly up to $200{\AA}$ of Ni thickness, however, there was no significant increase in strength over $200{\AA}$. The XPS analysis revealed that Ni thin films could increase the adhesion strength by reacting with the polar C=O bonds on the polyimide surface and also it could prevent Cu diffusion into the polyimide. The Cu/Ni/ polyimide multilayer thin films showed a high stability even at the high heating temperature of $200^{\circ}C$, however, at the temperature of $300^{\circ}C$, Cu diffused through the Ni buffer layer into polyimide, resulting in the drastic decrease in adhesion strength.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.119-124
• /
• 2009

In the microelectronics packaging industry, the adhesion strength between Cu and polyimide and the thermal stability are very important factors, as they influence the performance and reliability of the device. The three different buffer layers of Cr, 50%Cr-50%Ni, and Ni were adopted in a Cu/buffer layer/polyimide system and compared in terms of their adhesion strength and thermal stability at a temperature of $300^{\circ}C$ for 24hrs. A 90-degree peel test and XPS analysis revealed that both the peel strength and thermal stability decreased in the order of the Cr, 50%Cr-50%Ni and Ni buffer layer. The XPS analysis revealed that Cu can diffuse through the thin Ni buffer layer ($200{\AA}$), resulting in a decrease in the adhesion strength when the Cu/buffer layer/polyimide multilayer is heat-treated at a temperature of $300^{\circ}C$ for 24hrs. In contrast, Cu did not diffuse through the Cr buffer layer under the same heat-treatment conditions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.86.1-86.1
• /
• 2007

• Korean Journal of Metals and Materials
• /
• v.49 no.8
• /
• pp.657-663
• /
• 2011

This study represents the results of the peel strength and surface morphology according to the preprocessing times of polyimide (PI) in a Cu/Ni/PI structure flexible copper clad laminate production process based on the polyimide. Field emission scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were used to analyze the surface morphology, crystal structure, and interface binding structure of sputtered Ni, Cu, and electrodeposited copper foil layers. The surface roughness of Ni, Cu deposition layers and the crystal structure of electrodeposited Cu layers were varied according to the preprocessing times. In the RF plasma times that were varied by 100-600 seconds in a preprocessing process, the preprocessing applied by about 300-400 seconds showed a homogeneous surface morphology in the metal layers and that also represented high peel strength for the polyimide. Considering the effect of peel strength on plastic deformation, preprocessing times can reasonably be at about 400 seconds.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.3
• /
• pp.164-169
• /
• 2017

Ni-Cr-X ternary interlayers were investigated to improve the adhesion of Cu/Ni-Cr/Polyimide flexible copper clad laminates. The ternary compounds are sputtered Ni-Cr-X films (where X is one of Nb, V, Mo, or Ti), and the effect of third elements on the adhesion was evaluated and investigated chemically and mechanically. The feel strength was higher in the order of Ni-Cr-Nb > Ni-Cr-V > Ni-Cr > Ni-Cr-Mo > Ni-Cr-Ti. Nb, which has a comparable standard electrode potential to Cr, increased the adhesion, while Ti, with a low standard electrode potential, degraded the adhesion. The Ni-Cr-Nb interlayer was amorphous, while Ni-Cr-Ti was partially crystalline. The similar morphology structure of the Ni-Cr-Nb interlayer with polyimide resulted in a better adhesion.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.04a
• /
• pp.144-144
• /
• 2006

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1704-1705
• /
• 2011

MEMS(Micro Electro Mechanical Systems) 기술과 니켈 전기도금공정을 이용하여 수십 내지 수백개의 탐침을 갖는 일체형 탐침 패드(Probe Pad)를 제작하였다. PI(Polyimide) Film은 일본 UBE사의 $50{\mu}m$ 두께를 갖는 유피렉스를 사용하였다. 일체형 탐침 패드는 Polyimide Film에 Cu를 증착 후 사진식각공정을 통하여 PR Mold 형성한 후 전류가 흐르는 Cu 라인(line) 배선을 형성하기 위해 Cu를 식각하였으며 형성된 Cu Line 위에 니켈 전해도금공정을 실시하여 니켈 배선을 형성하였다. Ni 배선 위에 니켈 범프를 형성하기 위하여 PR Strip을 실시한 후 다시 PR Mold를 형성하였다. PR Mold 형성 후 다시 니켈 전해도 금을 실시하여 니켈 범프(bump)를 형성하였다. 제작된 탐침패드의 니켈배선의 폭은 $18.0{\mu}m$이고 피치(Pitch)는 $35{\mu}m$이며, 니켈 범프의 두께(Thickness)는 $10.0{\mu}m$로 제작되었다. 본 연구에서 제작된 탐침패드를 더욱 더 고집적화(Fine Pitch)하여 일체형 탐침 패드를 제작하게 되면 이를 사용하는 프로브유니트의 제작에 있어서 비용 절감 및 생산성(Throughput)을 크게 향상 시킬 수 있을 것이다.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.3
• /
• pp.11-17
• /
• 2004

This research has been progressed for adhesive improvement of the Polyimide/Buffer layer/Cu at the COF(Chip On Film) which induced as the alternative plan about high concentration of a circuit or substrates according to demands of miniaturization and high efficiency of various electronic equipment. RF plasma equipment was applied to when plama pretreatment was performed for improvement of adhesive strength of PI and Cr as the buffer layer. Experimental fluents were a species of the buffer layer, depositied time and the ratio of $O_2$/Ar when performed to plasma pretreatment. The results are that Ni was superior to Cr at peel test according to a species of the buffer layer, peel strength and Cu THK were showed proportional relation to deposition structure of the same buffer layer and sample of the Cr depositied time(30 sec) and Cu depositied time(20 min) was showed good adhesion to peel test according to Cr's depositied time and Cu's depositied time. When perform PI's plasma pretreatment peel strength and $O_2$/Ar ratio were showed proportional relation. But $O_2$/Ar(2/5) was best condition since then decreased.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.101-107
• /
• 2004

각종 전자기기의 소형화, 고성능화 요구에 따라 회로 또는 기판의 고집적화에 따른 대안으로 도입된 COF(Chip On Film)공정에서 PI(polyimide)/buffer layer/Cu의 접착력 개선을 목적으로 본 연구가 진행 되었다. 그리고 buffer layer로써 Cr을 증착 할 때 부착력의 개선을 목적으로 개질처리를 할 때는 RF plasma장비를 사용하였다. 실험 변수로는 peel strength에 대한 buffer layer의 종류와 증착시간, 표면 개질처리시 $O_2$/Ar비이다. Buffer layer의 종류에 따른 접착력은 Cr보다 Ni이 우수하였고 peel strength와 Cu THK는 같은 buffer layer의 증착 structure에서 비례 관계를 나타냈으며, Cr의 증착 시간과 Cu의 증착 시간을 변수로 peel strength test한 값은 Cr증착시간이 30초, Cu증착시간이 20분일때 40g/mm로 최적의 접착력이 나타났다. 증착전 PI의 개질 처리시 $O_2$/Ar 유량비에 따른 peel strength값은 $O_2$/Ar유량비가 증가 할수록 향상되었으며, 2/5에서 최고값인 58g/mm가 나타났다. 그 이상에서는 오히려 감소하였다.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.740-747
• /
• 2009

The purpose of this study is to identify the effect of electrolyte compositions on electrodeposited copper foil. First of all, the polyimide substrate was pretreated with plasma. Finally, copper foil was deposited on a Cu/Ni/Polyimide substrate using the electroplating technique. As the quantity of Cu increased, preferred orientations changed into (111). Increasing sulfuric acid, on the other hand, brought down the preferred orientation of (111). The lowest sheet resistance, surface roughness, and fine adhesion were detected when the ratio of $Cu^{2+}$ and $H_2SO_4$ is 50:50(g/l).