• Asian-Australasian Journal of Animal Sciences
• /
• 제14권11호
• /
• pp.1616-1620
• /
• 2001

Two feeding trials were conducted to study the effects of different chelated copper and zinc compounds on the performance and fecal excretions of weanling pigs. In Exp. 1, 150 weanling pigs ($L{\times}Y{\times}D$, $12.30{\pm}2.07kg$) were randomly assigned to five dietary treatments: 170 ppm Cu from $CuSO_4$, 85 ppm Cu from Cu amino-chelate (CAC), 170 ppm Cu from CAC, 85 ppm Cu from Cu-Lysine (CL), and 170 ppm Cu from CL. In Exp. 2, 150 weanling pigs ($L{\times}Y{\times}D$, $12.52{\pm}1.80kg$) were randomly assigned to five dietary treatments: 120 ppm Zn from $ZnSO_4$, 60 ppm Zn from Zn-amino-chelate (ZAC), 120 ppm Zn from ZAC, 60 ppm Zn from Zn-Methionine (ZM), and 120 ppm Zn from ZM. In both experiments, pigs were randomly distributed to the treatments following a randomized complete block design on the basis of body weight as the blocking variable. Each experiment was conducted for 28 days. Blood and fecal samples were collected to determine mineral contents as affected by the dietary treatments. There was no difference (p>0.05) in ADG and ADFI among treatments, but F/G was improved (p<0.05) in pigs fed diet with 170 ppm CAC than 85 ppm CL but not different (p>0.05) to the control (170 ppm $CuSO_4$). Regardless of copper source, concentration of Cu in serum and feces were higher in pigs fed diet with 170 ppm Cu than pigs fed diet with 85 ppm Cu (Exp 1). In Exp 2 the ADG was higher (p<0.05) in pigs fed diet with 120 ppm ZM than in pigs fed diets with 120 ppm $ZnSO_4$ and 60 ppm ZAC and ZM. The serum zinc concentration was generally higher (p<0.05) in pigs fed diet with organic source than the control group ($ZnSO_4$). Also, there was a trend towards a decrease in fecal excretions of zinc when dietary zinc level was low. The efficacy of the two chelated copper and zinc sources is similar in terms of growth performance. The fecal excretions for Cu and Zn could be reduced in pigs fed low level of these minerals using organic sources.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.164-164
• /
• 2008

금속배선공정에서 높은 전도율과 재료의 값이 싸다는 이유로 최근 Cu를 사용하였으나, 디바이스의 구조적 특성을 유지하기 위해 높은 압력으로 인한 새로운 다공성 막(low-k)의 파괴와, 디싱과 에로젼 현상으로 인한 문제점이 발생하게 되었다. 이러한 문제점을 해결하고자, 본 논문에서는 Cu 표면에 Passivation layer를 형성 및 제거하는 개념으로 공정시 연마제를 사용하지 않으며, 낮은 압력조건에서 공정을 수행하기 위해, 전해질의 농도 변화에 따른 Liner sweep voltammetry 법을 사용하여 전압활성화에 의한 전기화학적 반응이 Cu전극에 어떤 영향을 미치는지 연구하였으며, 표면 조성을 알아보기 위하여 Energy Dispersive Spectroscopy (EDS) 분석을 하였고, Cu disk의 결정성과 배향성 관찰을 위해 X-Ray diffraction (XRD)로 금속 표면을 비교하여 실험 결과로 얻어진 데이터를 통하여 ECMP 공정에 적합한 전해액 선정과 농도를 선택하였다.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.31-35
• /
• 2011

A silica aerogel sheet with a very low thermal conductivity is used to suppress the temperature increase of the Cu coil in an induction cooker by reducing the heat flow from the heat source (cooking pot). It is found that the temperature of the Cu coil is reduced significantly by the insertion of an insulation sheet between the heat source and the Cu coil, demonstrating the effectiveness of the insulation sheet in the suppression of the heat flow between the cooking pot and the coil. Furthermore, the temperature of the cooking pot increases more rapidly with the use of the insulation sheet, allowing for an increased efficiency of the induction cooker.

• 한국분말재료학회지
• /
• 제18권4호
• /
• pp.365-371
• /
• 2011

In this study, gradient porous Al-Cu sintered body was fabricated by powder metallurgy processing. Al-Cu powder mixtures were prepared by low energy ball milling with various milling time. After ball milling for 3h, the shape of powder mixtures changed to spherical type with size of 100~500 ${\mu}m$. Subsequently, Al-Cu powder mixtures were classified (under 150, 150~300 and over 300 ${\mu}m$) and compacted (20, 50 and 100 MPa). Then, they were sintered at $600^{\circ}C$ for various holding time (10, 30, 60 and 120 min) in $N_2$ atmosphere. The sintered bodies had 32~45% of porosity. As a result, the optimum holding time was determined to be 60 min at $600^{\circ}C$ and sintered bodies with various porosity were obtained by controlling the compacting pressure.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.294-297
• /
• 2008

In this paper, a novel non-vacuum technique is described for the fabrication of a $CuInSe_2$ (CIS) absorber layer for thin film solar cells using a low-cost precursor solution. A solution containing Cu- and Inrelated chemicals was coated onto a Mo/glass substrate using the Doctor blade method and the precursor layer was then selenized in an evaporation chamber. The precursor layer was found to be composed of CuCl crystals and amorphous In compound, which were completely converted to chalcopyrite CIS phase by the selenization process. Morphological, crystallographic and compositional analyses were performed at each step of the fabrication process by SEM, XRD and EDS, respectively.

• 공업화학
• /
• 제23권3호
• /
• pp.348-351
• /
• 2012

본 연구에서는 NO의 저온 SCR 반응에서 구리 첨가가 $Mn/CeO_2-ZrO_2$ 촉매의 활성에 미치는 영향을 알아보았다. 이를 위하여 $Mn/CeO_2-ZrO_2$ 촉매에 구리가 각각 5, 10, 15 wt% 첨가된 세가지 촉매의 활성을 조사하였다. 촉매의 특성은 BET, XRD, XPS, $H_2-TPR$을 통해 분석하였다. 구리가 첨가된 촉매의 질소산화물 저감 효율을 측정한 결과 Cu 농도가 증가할수록 활성이 증가하였으며 Cu 15 wt%가 담지하였을 경우 질소산화물 저감효율이 99%까지 도달하는 등 가장 높은 저감효율을 나타내었다. 이는 표면의 망간과 구리의 interaction에 의한 환원의 향상이 촉매 효율 증가의 원인으로 여겨진다.

• 한국수소및신에너지학회논문집
• /
• 제14권2호
• /
• pp.155-170
• /
• 2003

$Cu-Ce/{\gamma}-Al_2O_3$ based catalysts were prepared and tested for selective oxidation of CO in a $H_2$-rich stream(1% CO, 1% $O_2$, 60% $H_2$, $N_2$ as balance). The effects of Cu loading and weight ratio(=Cu/(Cu+Ce)) upon both activity and selectivity were investigated upon the change in temperatures, It was also examined how the activity and selectivity of catalysts were varied with the presence of $CO_2$ and $H_2O$ in the reactant feed. Among the various Cu-Ce catalysts with different catalytic metal composition, Cu-Ce(4 : 16 wf%) /${\gamma}-Al_2O_3$ catalyst showed the highest activity(>$T_{99}$) and selectivities(50-80%) under wide range of temperatures($175-220^{\circ}C$). However, in the Cu-Ce(4 : 16 wt%)/ ${\gamma}-Al_2O_3$, the presence of $CO_2$ and $H_2O$ in the reactant feed decreased the activity and the maximum activity(>$T_{99}$) in terms of reaction temperature moved by about $25^{\circ}C$ toward higher temperature, the $T_{>99}$ window was seen between $210-230^{\circ}C$ (selectivity 50-75%). From $CO_2-/H_2O-TPD$, it can be concluded that the main cause for the decrease in catalytic activity may be attributed to the blockage of the active sites by competitive adsorption of water vapor and $CO_2$ with the reactant at low temperatures.

• 공업화학
• /
• 제19권1호
• /
• pp.92-97
• /
• 2008

$MnO_2$와 K 또는 Cu 담지 활성탄으로 이루어진 혼성촉매상에서 암모니아를 환원제로 사용한 NO의 저온 선택적 촉매 환원반응을 수행하였다. 반응물에 산소를 투입한 경우 NO의 제거율은 증가하였으며, 활성탄에 전이금속을 담지할 경우 탈질 효율이 증가한다. 수분이 존재하지 않는 경우 $MnO_2$와 K 담지 활성탄으로 이루어진 혼성촉매가 $120^{\circ}C$의 저온에서 가장 높은 탈질 효율을 보였으나, 수분이 존재할 경우 모든 촉매의 활성은 현저하게 떨어졌다. 수분 존재 시 $MnO_2$와 질산처리/열처리를 한 Cu 담지 활성탄을 물리적으로 1 : 1 (w/w) 비율로 혼합한 촉매가 $MnO_2$와 Cu 담지 활성탄을 단독으로 사용한 것에 비해 탈질효율이 더 우수하였다.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.560-565
• /
• 2007

화학환원법을 이용하여 폐동분 수용액에 환원제인 hydrazine을 첨가하여 $0.11{\sim}0.64{\mu}m$ 크기의 Cu 미립자를 제조하였으며, 이 과정 중 hydrazine의 첨가량이 얻어진 분말의 물성에 미치는 영향을 살펴보았다. 또한 분말합성 과정 중 분산제인 polyvinyl alcohol(PVA) 또는 polyvinyl pyrrolidone(PVP) 첨가가 분말의 물성에 미치는 영향도 조사하였다. 1 M 농도의 폐동분 수용액에 hydrazine이 0.8 mol, 1.0 mol 첨가된 경우에는 Cu와 $Cu_2O$의 혼합물을 나타내어 순수한 Cu 분말을 생성하지 못했다. 반면 적당량의 hydrazine(1.2 mol)이 첨가된 경우에는 순수한 Cu 분말이 생성되었다. 또한 얻어진 Cu 분말의 평균크기는 hydrazine과 분산제의 첨가량이 증가함에 따라 감소하였다. 한편 분말의 응집을 억제하는 분산제로서 PVA의 사용이 PVP 보다 더욱 효과적이었다.

• 한국주조공학회지
• /
• 제15권2호
• /
• pp.146-155
• /
• 1995

This study was performed to investigate the effect of austempering temperature on the mechanical properties and fracture characteristics of the ductile cast iron with Cu, Mo and Cu, Mo, Ni. The results obtained from this study are summarized as follows; Microstructures of Cu-Mo and Cu-Mo-Ni ductile cast iron by austempering were obtained low bainite with some martensite at $250^{\circ}C$, mixture structure of upper and low bainite obtained at $300^{\circ}C$ and upper bainite obtained at $350^{\circ}C$. Tensile, impact and fracture toughness properties were remarkably controlled by retained austenite. With increasing austempering temperature, tensile and yield strength, hardness decreased, while the elongation and impact absorption energy, fracture toughness increased. With adding Ni, tensile and yield strength increased and elongation, facture toughness and impact absorption energy decreased. Retained austenite increased with increasing austempering temperature and the fracture surface were shown mixture structure of fibrous and dimple.