• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.370-377
• /
• 1997

The several fundamental parameters on the solvent extraction of Co(II), Cu(II) and Zn(II) with dithizone were investigated. The value of $K_{a1}/K_p$ of dithizone(at $25^{\circ}C$) between an aqueous phase and a chloroform was found to be $4.72{\times}10^{-11}$. And the mole ratios of metal ion to dithizone in its metal complexes were determined by mole ratio method. The extractibilities(%) for metal-dithizone chelates were obtained from the extraction equilibria of metal-dithizone complexes between an aqueous phase and a chloroform as follows. Co(II) : 92.3% at pH 8.0 : Cu(II) : 97.1% at pH 4.0 and Zn(II) : 99.0% at pH 7.0. And also, in optimum experimental conditions the extraction constants of Co(II), Cu(II) and Zn(II) were examined.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.1-5
• /
• 2010

Cu(II)-organic complexes were synthesized with Lewis base organic ligands including diamine, aminothiol, and dithiol to determine the reactivity for DFP hydrolysis. Results show that the aminothiol catalyst enhances the hydrolysis of DFP in three folds compared to diamine type because aminothiol has higher basicity than diamine. Due to low solubility of Cu(II)(1,2-ethane dithiol)$(NO_3)_2$, it is impossible to compare directly the rates in homogeneous condition. However, the rate of dithol complex is even 1.6 times faster than that of the diamine type. The reactivity of zeolite for DFP hydrolysis is also evaluated. NaY type does not promote the hydrolysis, but RuNaY shows relatively lower reactivity than those of Cu(II)-organic ligands complexes.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.3
• /
• pp.253-259
• /
• 2018

Cu(II) can cause health problem for human being and phosphate is a key pollutant induces eutrophication in rivers and ponds. To remove of Cu(II) and phosphate from solution, chitosan as adsorbent was chosen and used as a form of hydrogel bead. Due to the chemical instability of hydrogel chitosan bead (HCB), the crosslinked HCB by glutaraldehyde (GA) was prepared (HCB-G). HCB-G maintained the spherical bead type at 1% HCl without a loss of chitosan. A variety of batch experiment tests were carried out to determine the removal efficiency (%), maximum uptake (Q, mg/g), and reaction rate. In the single presence of Cu(II) or phosphate, the removal efficiency was obtained to 17 and 16%, respectively. However, the removal efficiency of Cu(II) and phosphate was increased to 50~55% at a mixed solution. The maximum uptake (Q) for Cu(II) and phosphate was enhanced from 11.3 to74.4 mg/g and from 3.34 to 36.6 mg/g, respectively. While the reaction rate of Cu(II) and phosphate was almost finished within 24 and 6 h at single solution, it was not changed for Cu(II) but was retarded for phosphate at mixed solution.

• Carbon letters
• /
• v.10 no.4
• /
• pp.305-313
• /
• 2009

In this study, the adsorption of toxic pollutants onto cetyltrimethylammonium kaolin (CTAB-Kaolin) is investigated. The organo-kaolin is synthesized by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of kaolin. The chemical analysis, the structural and textural properties of kaolin and CTAB-kaolin were investigated using elemental analysis, FTIR, SEM and adsorption of nitrogen at $-196^{\circ}C$. The kinetic adsorption and adsorption capacity of the organo-kaolin towards o-xylene, phenol and Cu(II) ion from aqueous solution was investigated. The kinetic adsorption data of o-xylene, phenol and Cu(II) are in agreement with a second order model. The equilibrium adsorption data were found to fit Langmuir equation. The uptake of o-xylene and phenol from their aqueous solution by kaolin, CTAB-kaolin and activated carbon proceed via physisorption. The removal of Cu(II) ion from water depends on the surface properties of the adsorbent. Onto kaolin, the Cu(II) ions are adsorbed through cation exchange with $Na^+$. For CTAB-kaolin, Cu(II) ions are mainly adsorbed via electrostatic attraction with the counter ions in the electric double layer ($Br^-$), via ion pairing, Cu(II) ions removal by the activated carbon is probably related to the carbon-oxygen groups particularly those of acid type. The adsorption capacities of CTAB-kaolin for the investigated adsorbates are considerably higher compared with those of unmodified kaolin. However, the adsorption capacities of the activated carbons are by far higher than those determined for CTAB-kaolin.

• Journal of Environmental Science International
• /
• v.25 no.11
• /
• pp.1485-1491
• /
• 2016

PSf/D2EHPA/CNT beads were prepared by immobilizing di-(2-ethylhexyl)-phosphoric acid (D2EHPA) and carbon nanotubes (CNT) on polysulfone (PSf) and used to remove Cu(II) from aqueous solutions. Optimum pH was in the range of 4 to 6. The removal kinetic of Cu(II) by the prepared PSf/D2EHPA/CNT beads was mainly governed by internal diffusion, and the diffusion coefficient of Cu(II) by PSf/D2EHPA/CNT beads was found to be $2.19{\times}10^{-4}{\sim}2.64{\times}10^{-4}cm^2/s$. The Langmuir isotherm model predicted the experimented data well. The maximum removal capacity of Cu(II) obtained from this isotherm was 7.32 mg/g. Calculated thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ showed that the adsorption of Cu(II) ions onto PSf/D2EHPA/CNT beads was feasible, spontaneous and endothermic at 293-323 K.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2731-2736
• /
• 2013

We report a new tetrameric supramolecular Cu(II) complex ($Cu_4L_4$ = tetrakis(N,N'-bis(salicylidene)-2,2'-ethylenedianiline)Copper(II)) with a Schiff-base ligand ($H_2L$ = N,N'-bis (salicylaldimine)-1,2-ethylenediamine) containing two N,O-bidentate chelate groups. Though the copper sites of $Cu_4L_4$ are non-coupled, the complex exhibits a unsually high catecholase-like activity ($k_{cat}=935h^{-1}$) when the $Cu_4L_4$ solution is treated with 3,5-di-tert-butylcatechol (3,5-DTBC) at basic condition in the presence of air. Combined information obtained from UV-VIS and EPR measurements could lead the suggestion of the reaction pathway in which the substrate may bind to Cu(II) ions by anti-anti didentate bridging mode.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.252-258
• /
• 2000

Various crosslinked poly(4-vinylpyridines) (CHP4VP) having different degrees of crosslinking were synthesized by radical copolymerization of 4-vinylpyridine with if N,N' -1, 6-hexamethylenebisacrylamide, and CHP4VP- Cu(II) complexes were prepared by the method of adsorption equilibrium. The catalytic activity of the complexes for the oxidation of ascorbic acid (AA) was investigated. The oxidation of AA by these complexes showed a kinetic behavior of the Michaelis-Menten type. The catalytic activity of CHP4VP-Cu(I ) catalytic system was increased with increasing the degree of crosslinking of CHP4VP, and its activity was scarcely decreased even after repeated use. However, the tendency of the catalytic activity of CHP4VP-Cu(II) complexes was decreased for the oxidation of AA when compared with that of the previously reported catalytic system containing crosslinked poly(4-vinylpyridine) prepared using N,N'-methylenebisacrylamide as a crosslinker. These results indicate that the degree of crosslinking of CHP4VP and the hydrophobicity of the crosslinker play an important role in the catalytic system of the oxidation of AA.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.395-401
• /
• 1989

The concentrations of Cu(II), Y(III) and Ba(II) ionic species in aqueous solution due to the formation of Cu2+-oxalate-complex have been theoretically calculated with respect to pH and their solubility diagrams could be obtained. It was verified from the calculation that the excess of Cu2+ and Ba2+ should be added in order to obtain oxalate coprecipitates with the molar ratio of Y : Ba : Cu=1 : 2 : 3. The exact amount of excess species has been calculated with respect to the initial concentrations of metal ions and pH.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.276-281
• /
• 1991

Electrochemical behaviors of optically active sparteine-Cu(II) dihalide complexes were investigated by polarography and cyclic voltammetry (CV). These Cu(II) complexes are rather easier to be reduced to Cu(I) states when comparison is made with other nonplaner copper complexes, We have assigned the CV peaks and polarographic waves related to the redox processes for these complexes. We could also observe the exchange reaction of Cu(II) ion in the complex with mercury metal in the cell having mercury pool. The redox mechanism of these complelxes is as follows; The 1st wave appeared at +0.47 V/+0.65 V corresponds to the reaction of $SpCuX_2+ e{\rightleftarrow}SpCuX_{2^-}$ and the 2nd one at +0.26 V/+0.21 V does the reaction of $SpCuX_{2 ^-} +e{\rightleftarrow}SpCuX_2^{2-}$. The 3rd one at -0.35 V/-0.27 V is dueto the reduction of mercury complex formed via exchange reaction. Where, X is chloride ion.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.672-682
• /
• 1993

2, 4-Heptadione(abbreviated to 24HTD) was synthesized from methylpropyl ketone and ethyl acetate with sodium amide, and the equilibrium and the kinetic characteristics of copper extraction by 24HTD-chloroform were investigated. Equilibrium constants such as the dissociation constant and the distribution coefficient of 24HTD and the stability constant of the 24HTD-Cu chelate were evaluated from the spectrophotometry, and the overall equilibrium constant of the extraction was also determined. The extracted species of the 24HTD-Cu chelate was found to be $CuR_2$ and the initial rate of the extraction of coupper by 24HTD in chloroform was expressed by $R_0=k[\bar{HR}]([Cu^{2+}]/[H^+])^{0.5}$.