• Environmental Analysis Health and Toxicology
• /
• v.24 no.3
• /
• pp.241-249
• /
• 2009

Heavy metal contaminants on the aquatic environment are of interest because they can have severe effects on economy and public health. Recently, the studies for monitoring of heavy metals try to do on aquatic system to assess safety and health of ecosystem by heavy metals. Thus, biological responses were investigated on Korean fairy shrimp Branchinella kugenumaensis exposed to cadmium (Cd) or copper (Cu) for long-periods (30 days). The survival rate decreased significantly (p<0.05) on B. kugenumaensis exposed to Cd and Cu at all concentrations. Especially, the highest decrease was observed at the relatively high concentration of Cd and Cu (p<0.01) and the response by Cd exposure was at dose-dependent. The growth rates were also decreased significantly (p<0.05) on B. kugenumaensis exposed to Cd and Cu for at all concentrations. Then, the reproduction rate, numbering cyst, was decreased significantly (p<0.01) on B. kugenumaensis after Cd or Cu exposures. Long exposure of the relatively high concentration Cd and Cu can have severe effects on the reproduction, while exposures of Cd and Cu can not have effects on sex ratios of B. kugenumaensis. Additionally, asymmetric telson deformity was only observed after Cd exposure. Therefore, these results suggest that B. kugenumaensis is a sensitive bio-indicator of heavy metal exposure and these biological responses of B. kugenumaensis give important information for long-term monitoring on aquatic ecosystem.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1686-1689
• /
• 2003

The ability of ten probiotic bacteria to bind a common food carcinogen aflatoxin $G_1$,$G_2$ and $B_2$ was assessed. The strains were incubated in vitro with aflatoxins and the toxin residues in the supernatant were measured using high performance liquid chromatography. The aflatoxin $G_1$ binding capacity of the strains was found to strain dependent, most efficient binding of AF$G_1$ was observed by L. acidophilus CU028 and L. brevis CU06 which bound approximately 50%. L. acidophilus CU028 was capable of bind approximately 67% of AF$G_2$, difference in their binding ability showed statistical significance (p>0.05). L. acidophilus CU028 and L. helveticus CU 631 were the best binders and the strains were observed to possess variable AF$B_2$-binding ability in the range was from 38.0% to 55.9%. Lactobacillus acidophilus CU028 was the best common binders of the three types of food carcinogen aflatoxins. The application of binding phenomenon in the removal of mycotoxins from contaminated feeds is urgently needed to improve the safety of feeds.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.32-35
• /
• 2008

Thermally stable diffusion barrier of tungsten carbon nitride(W-C-N) and of tungsten boron carbon nitride(W-B-C-N) thin films have studied to investigate the impurity behaviors of boron and nitrogen. In this paper we newly deposited tungsten boron carbon nitride(W-B-C-N) thin film for various $W_2B$ target power on silicon substrate. The impurities of the 100nm-thick W-C-N and W-B-C-N thin films provide stuffing effect for preventing the inter-diffusion between W-C-N or W-B-C-N thin films and silicon during the high temperature($700^{\circ}C{\sim}1000^{\circ}C$) annealing process.

• Korean Journal of Materials Research
• /
• v.13 no.2
• /
• pp.101-105
• /
• 2003

In this study, we have investigated the availability of the electroless Ni-B plating for a diffusion barrier of the bus electrode. The Ni-B layer of 1$\beta$: thick was electroless deposited on the electroplated Cu bus electrode for AC plasma display. The layer was to encapsulate Cu bus electrode to prevent from its oxidation and to serve as a diffusion barrier against Cu contamination of the transparent dielectric layer in AC plasma display. The microstructure of the as-plated barrier layer was made of an amorphous phase and the structure was converted to crystalline at about 30$0^{\circ}C$. The concentration of boron was about 5∼6 wt.% in the electroless Ni-B deposit regardless of DMAB concentration. The electroless Ni-B deposit was coated on the surface of the electroplated Cu bus electrode uniformly. And the electroless Ni-B plating was found to be an appropriate process to form the diffusion barrier.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.333-344
• /
• 1995

Cu를 함유한 2종의 저합금 고장력강(HSLA-A, HSLA-B)\ulcorner 기계적 성질에 미치는 시효처리의 영향을 조사하였다. 탄소량이 적음에도 불구하고 Cu첨가로 석출물을 생성시킴으로서 2합금 모두 $650^{\circ}C$에서 시효한 경우 양호한 강도(HSLA-A:Y.S 703Mpa, E.L 22.6% HSLA-B:Y.S 810 Mpa, E.L 23.8%)와 인성(HSLA-A:271.4J, HSLA-B:197.5J at -5$0^{\circ}C$)의 조합을 나타내었다. 50$0^{\circ}C$에서 시효할 때 가장 높은 항복 강도를 나타내나 인성은 아주 낮은 값을 나타내었다. 50$0^{\circ}C$이상 시효 온도가 증가하면 강도는 감소하고 인성은 증가하였다. HSLA-B강의 강도가 HSLA-A 강보다 높은데, \ulcorner칭 상태에서의 강도 차이는 경화능을 증가시키는 원소인 Ni, Mn, Mo, Cu의 첨가량 차이에 의한 기지 조직의 차이에 의한 것이며, 시효한 상태에서의 강도 차이는 기지 조직과 석출 강화에 기여하는 Cu량의 차이에 의한 것으로 판단된다. 시효 경화 곡선에서 $700^{\circ}C$에서의 경도 증가는 오스테나이트-페라이트 2상 영역으로부터 냉각시 생성된 “M-A constituents”에 의한 것이다. HSLA-A강과 HSLA-B강의 충격 천이 온도는 각각 -1$25^{\circ}C$와 -145$^{\circ}C$이었다.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.398-402
• /
• 2011

A novel laminate composite of FeCuNbSiB/FeNi /PZT is proposed, where FeCuNbSiB has a permeability of around 100000, which is much larger than that of FeNi. The high-permeability FeCuNbSiB was laminated with piezomagnetic FeNi rather than attached to its ends. It is expected that the effect produced by the high permeability will act on the whole of the piezomagnetic layer. While a FeNi layer was laminated with a FeCuNbSiB layer, the strong demagnetization produced by the latter was expected to be imposed on the FeNi layer as well as the applied fields. The distribution of applied fields was altered by the high-permeability material (both bias and ac field) and the field variation positively contributed to the ME effect in piezomagnetic/piezoelectric composites. Thus the ME voltage coefficient along with the field sensitivity were improved.

• Journal of Korea Foundry Society
• /
• v.20 no.2
• /
• pp.89-96
• /
• 2000

The effects of modification processing on the refinement of primary Si and the wear behavior of hyper-eutectic Al-Si alloys have been mainly investigated. Refining effects of primary Si in Al-17%Si alloy was more efficient than that of B.390 alloy. Optimum condition of getting the finest primary Si microstructure was when AlCuP modifier is added into the melt at $750^{\circ}C$ and held it at $700^{\circ}C$ for 30 minutes. Wear loss in the specimens of as-cast condition decreases as the size of primary Si decreases, in the order of B.390 alloy, B.390 alloy with AlCuP addition, Al-17%Si alloy and Al-17%Si alloy with AlCuP addition. Wear loss in the aged condition of Al-17%Si alloy, B.390 alloy and B.390 alloy with AlCuP addition decreased due to the increase of compressive residual stress in the matrix by the aging treatment. While, wear loss increased in the aged specimens of Al-17%Si alloy with AlCuP addition and Hepworth addition in which compressive residual stress decreases by the aging treatment. Therefore, it is assumed that higher compressive residual stress in the matrix can reduce the wear loss in composite materials such as hyper-eutectic Al-Si alloys.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.4
• /
• pp.237-246
• /
• 2003

This pot experiment was conducted in order to find out the effects of application of combined micronutrients(T$_1$: control. T$_2$; Fe, T$_3$; Fe+Mn, T$_4$； Fe＋Mn＋Cu, T$_{5}$; Fe+Mn+Cu＋Zn, T$_{6}$；Fe+Mn+Cu＋Zn+Mo, T$_{7}$； Fe+Mn+Cu+Zn+Mo+B) on forage performance of pure and mixed cultures of orchardgrass and white clover The 2nd part was concerned with the changes in the forage yields and concurrence index. The results obtained are summarized as follows: 1. The effects of combined micronutrient applications on the forage yields were different according to the forage species, whether it was a pure or mixed cultures, and additional fertilization(especially N). The effects of them on the forage productivity and botanical composition were more obvious in white clover, especially in mixed culture, than in orchardgrass. By the significant role of B as a regulator, the yields of both forages were best in the T$_{7}$, respectively. 2. In the pure culture, the high yields of both forages were obtained by the T$_{7}$ and T$_2$, whereas the T$_{6}$ and T$_3$resulted in the low yields. The best yields of both forages were obtained by the T$_{7}$ with relatively optimum ratios among the micronutrients as follows; Fe/Mn/Cu/Zn, Fe/Mo, Mo/B, and ∑ cation/∑anion. It was observed the multiple interaction of Fe${\times}$Mn${\times}$Mo${\times}$B, and the significant role of B as a regulator. The effects of them on white clover were more distinct at no additional fertilization than at the additional fertilization(especially N). 3. In mixed culture, the optimum applications of them resulted in the positive increase of yield and botanical composition of white clover, whereas orchardgrass tended to be inversely except the T$_{7}$.X> 7/. 7/.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.597-601
• /
• 2001

The effect of CuO, $B_2$ $O_3$, $V_2$ $O_{5}$ and CuO-B $i_2$ $O_3$additives on microwave dielectric properties of (P $b_{0.45}$C $a_{0.55}$) [(F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$(PCFNS) were investigated. The PCFNS ceramics were sintered at 11$65^{\circ}C$. To decrease the sintering temperature for using as a low-temperature co-firing ceramics (LTCC), CuO, $B_2$ $O_3$, $V_2$ $O_{5}$ and CuO-B $i_2$ $O_3$were added to the PCFNS. As the content of CuO increased, the sintered density and dielectric constant increased and the temperature coefficient of resonance frequency ($\tau$$_{f}$) shifted to the positive value. When the CuO-B $i_2$ $O_3$were added, dielectric properties were $\varepsilon$$_{r}$ of 83, Q. $f_{0}$ of 6085 GHz, and $\tau$$_{f}$ of 8ppm/$^{\circ}C$ at a sintering temperature of 100$0^{\circ}C$. The relationship between the microstructure and properties of ceramics was studied by X-ray diffraction and scanning electron microscopy.icroscopy.y.icroscopy.y.

• Journal of Surface Science and Engineering
• /
• v.28 no.1
• /
• pp.3-13
• /
• 1995

Electroless Ni and Cu platings were conducted on $B_4C$ and SiC. In the electroless Ni plating, the deposition rate on $B_4C$ was higher than on SiC. However, the electroless Cu deposition occured with high deposition rate regardless of the carbide substrates used in this study. Uniformity of the deposits was better in the electroless Cu deposition than in the electroless Ni deposition. In the topographies of the electroless depositions, Ni deposits have grown as colony, whereas Cu deposits have grown as fine individual grains.