• Journal of the Korean Ceramic Society
• /
• v.33 no.9
• /
• pp.969-976
• /
• 1996

RuO2 thin films were deposited on SiO2(1000 $\AA$)/Si by hot-wall Metal Organic Chemical Vapor Depositon. The crystallinity of RuO2 thin films increased with increasing deposition temperature and the preferred orienta-tion of RuO2 films converted (200) plane to (101) plane with increasing film thicknesses. Such a change in preferred orientation was influenced on the crystallographic structure and the residual stress of RuO2 thin films. The resistivity of the 2700$\AA$-thick RuO2 thin films deposted at 30$0^{\circ}C$ was 52.7$\mu$$\Omega$-cm and they could be applicable to bottom electrodes of high dielectric materials. However the resistivity of RuO2 thin films increased with decreasing film thicknesses. The grain size and the resistivity of RuO2 thin films were densified with increasing the annealing temperature and showed the decrease of resistivity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.578-581
• /
• 1999

The Co-Cr-Ta films are one of the most suitable candidates for perpendicular magnetic recording media. The facing targets sputtering(FTS) system has a advantage of preparing films over a wide range of working gas pressure on plasma-free substrates. In this study, we investigated the effect underlayers on the growths layers of Co-Cr-Ta recording layers. The Co-Cr-Ta/Ti(CoCr) double layers were deposited with sputter gas pressure$(P_N, 0.3-1mTorr)$ by using FTS apparatus at temperature of$40^{\circ}C~-300^{\circ}C$, respectively. Crystallographic and magnetic characteristics were evaluated by x-ray diffractometry(XRD) and vibrating sample magnetometer(VSM), respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.444-450
• /
• 2000

We prepared Co-Cr thin film for perpendicular magnetic recording media with facing targets sputtering system(FTS system) which can deposit a high quality thin film in plasma-free state and wide range of working pressure. The effect of sputtering conditions(argon gas pressure and substrate temperature) on the magnetic and the crystallographic characteristic of Co-Cr thin film was investigated. And the variation of perpendicular coercivity with the variation of film thickness was studied. As a result we obtained the high perpendicular coercivity of 1900Oe and the good dispersion angle of c-axis($\Delta$$\theta$$_{50}$) of 5$^{\circ}$on the film thickness of 100nm for the promising recording layer of perpendicular magnetic recording media.c recording media.a.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1500-1501
• /
• 2006

Because AZO thin film has the potential applications, Preparing AZO thin films on the polymer substrate has been widely studied. In this study, we prepared AZO thin films on polyethersulfon (PES) at room temperature. The AZO thin films were prepared at $O_2$ gas flow rate of 0.05 and sputtering power of 100W with different film thickness by facing targets sputtering method. The electrical, optical and crystallographic properties of AZO thin films were measured by Hall effect measurement system, UV/VIS spectrometer, SEM and XRD. From the results, we obtained AZO thin films with a low resistivity, a transmittance of over 80% and c-axis preferred orientation.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.595-597
• /
• 2008

Zinc Oxide(ZnO) thin films on Si (100) substrate were deposited by RF magnetron sputter with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance. To analyze a crystallographic properties of the films, ${\Theta}/2{\Theta}$ mode X-ray diffraction, SEM analyses. C-axis preferred orientation highly depended on RF power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.316-319
• /
• 2000

By RF magnetron sputtering ZnGa$_2$O$_4$thin films were prepared on Si(100) wafer in terms of RF power, substrate temperatures and Ar/O$_2$flow rate. Crystallographic orientation was characterized by x-ray diffraction(XRD). Surface morphology and microstructure were observed by scanning electron microscope(SEM). Photoluminescence(PL) measurement was employed to observe the emission spectra of ZnGa$_2$O$_4$films. The influences of various deposition parameters on the properties of grown films were studied. PL spectrum of ZnGa$_2$O$_4$thin films showed broad band luminescence spectrum.

• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.389-394
• /
• 2000

Scanning Probe Microscope (SPM) such as Scanning Tunneling Microscope (STM) and Atomic Force Microscope (AEM) was shown to be the powerful tool for nano-scale characterization of material surfaces. Using this technique, surface morphology of the cyclically deformed Cu or Cu-Al single crystal was observed. The surface became proportionately rough as the number of cycles increased, but after some number of cycles no further change was observed. Slip steps with the heights of 100 to 200 nm and the widths of 1000 to 2000 nm were prevailing at the stage. The slipped distance of one slip system at the surface was not uniform, and formation of the extrusions or intrusions was assumed to occur such place. By comparing the morphological change caused by crystallographic orientation, strain amplitude, number of cycles or stacking fault energy, some interesting results which help to clarify the basic mechanism of fatigue damage were obtained. Furthermore, applicability of the scanning tunneling microscopy to fatigue damage is discussed.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.313-319
• /
• 1992

The mechanisms of fatigue crack growth (FCG) in a Ti$_3$Al-based (${\alpha}_2$) alloy, Ti-24Al-11Nb (a/o) with acicular microstructure were studied with particular attention focused on the fatigue crack path through the microstructure and on the effects of specimen orientation and crack closure. The results showed that the fatigue cracks of Ti-24Al-11Nb alloy grew much faster than conventional titanium alloys, with little difference in FCG rates for TL and TS orientations. The fatigue crack paths revealed crystallographic transgranular fracture with frequent serrations and branching. This is in agreement with the known effects of slip planarity and microstructure on the FCG behavior. The load-displacement hysteresis loops showed that the crack closure influenced the FCG behavior.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.89-92
• /
• 2005

The AIN/AI thin films were prepared at various conditions, such as $N_2$ gas flow rate [$N_2(N_2+Ar)$] from 0.6 to 0.9, a substrate temperature ranging from room temperature to $300^{\circ}C$ and working pressure 1mTorr. We estimated crystallographic characteristics and c-axis preferred orientations of AIN/AI thin films as function of AI electrode surface roughness. The optimal processing conditions for AI electrode were found at substrate temperature of $300^{\circ}C$ sputtering power of 100W and a working pressure of 2mTorr. In these conditions, we obtained the c-axis preferred orientation of $AIN/AI/SiO_2/Si$ thin film about 4 degree.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.465-469
• /
• 1995

We have investigated the effects of deposition angle on structural and magnetic properties of e-beam evaporated ${(4-{\AA}\;Co/9.2-{\AA}\;Pt)}_{23}$ multilayer thin films prepared on tilted substrates. It was found that the [111] crystallographic orientations of the multilayer thin films were not aligned with colummar growth orientations and they were remained to be normal to the substrate planes even though the deposition angle was severely oblique up to $60^{\circ}$. The analysis of the torque curve reveal that the intrinsic anisotropy energy was monotonically decreased with the deposition angle but the easy axis orientation parallel to the substrate normal was not much influenced by deposition angle.