• Transactions on Electrical and Electronic Materials
• /
• v.8 no.2
• /
• pp.73-78
• /
• 2007

The crystallization temperature in GeTe solid electrolyte films was improved by in situ-nitrogen doping by rf magnetron co-sputtering technique at room temperature. The crystallization temperature of $250\;^{\circ}C$ in electrolyte films without nitrogen doping increased by approximately $300\;^{\circ}C$, $350\;^{\circ}C$, and above $400\;^{\circ}C$ in films deposited with nitrogen/argon flow ratios of 10, 20, and 30 %, respectively. A PMC memory device with $Ge_{45}Te_{55}$ solid electrolytes deposited with nitrogen/argon flow ratios of 20 % shows reproducible memory switching characteristics based on resistive switching at threshold voltage of 1.2 V with high $R_{off}/R_{on}$ ratios. Nitrogen doping into the silver saturated GeTe electrolyte films improves the crystallization temperature of electrolyte films and does not appear to have a negative impact on the switching characteristics of PMC memory devices.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.96.2-96.2
• /
• 2010

The surface morphology and structural properties of polycrystalline silicon (poly-Si) films made in-situ aluminum induced crystallization at various substrate temperature (300~600) was investigated. Silicon films were deposited by hot-wire chemical vapor deposition (HWCVD), as the catalytic or pyrolytic decomposition of precursor gases SiH4 occurs only on the surface of the heated wire. Aluminum films were deposited by DC magnetron sputtering at room temperature. continuous poly-Si films were achieved at low temperature. from cross-section TEM analyses, It was confirmed that poly-Si above $450^{\circ}C$ was successfully grown on and poly-Si films had (111) preferred orientation. As substrate temperature increases, Si(111)/Si(220) ratio was decreased. The electrical properties of poly-Si film were investigated by Hall effect measurement. Poly-Si film was p-type by Al and resistivity and hall effect mobility was affected by substrate temperature.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1274-1279
• /
• 1998

The glass forming ability of the PbO-B2O3-TiO3-BaO system was investigated in relation to transitieon tem-peratures and the atomic ratio between constituents. Glass forming tendency was improved as the tem-peratures and the atomic ratio between constituents. Glass forming tendency was improved as the tem-perature differences between liquidus temperature and crystallization(or glass transition) temperature de-creased and the temperature difference between crystallization and glass transition temperature increases. The atomic ratio could be used as a criterion to deign glass systems. The interposition of B and Ba atoms between Pb and Ti atoms was one of important factors in glass formation.

• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.443-450
• /
• 2014

Amorphous (a-Si) films were epitaxially crystallized on a very thin large-grained poly-Si seed layer by a silicide-enhanced rapid thermal annealing (SERTA) process. The poly-Si seed layer contained a small amount of nickel silicide which can enhance crystallization of the upper layer of the a-Si film at lower temperature. A 5-nm thick poly-Si seed layer was then prepared by the crystallization of an a-Si film using the vapor-induced crystallization process in a $NiCl_2$ environment. After removing surface oxide on the seed layer, a 45-nm thick a-Si film was deposited on the poly-Si seed layer by hot-wire chemical vapor deposition at $200^{\circ}C$. The epitaxial crystallization of the top a-Si layer was performed by the rapid thermal annealing (RTA) process at $730^{\circ}C$ for 5 min in Ar as an ambient atmosphere. Considering the needle-like grains as well as the crystallization temperature of the top layer as produced by the SERTA process, it was thought that the top a-Si layer was epitaxially crystallized with the help of $NiSi_2$ precipitates that originated from the poly-Si seed layer. The crystallinity of the SERTA processed poly-Si thin films was better than the other crystallization process, due to the high-temperature RTA process. The Ni concentration in the poly-Si film fabricated by the SERTA process was reduced to $1{\times}10^{18}cm^{-3}$. The maximum field-effect mobility and substrate swing of the p-channel poly-Si thin-film transistors (TFTs) using the poly-Si film prepared by the SERTA process were $85cm^2/V{\cdot}s$ and 1.23 V/decade at $V_{ds}=-3V$, respectively. The off current was little increased under reverse bias from $1.0{\times}10^{-11}$ A. Our results showed that the SERTA process is a promising technology for high quality poly-Si film, which enables the fabrication of high mobility TFTs. In addition, it is expected that poly-Si TFTs with low leakage current can be fabricated with more precise experiments.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.86.2-86.2
• /
• 2007

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.107-109
• /
• 2000

The crystallization process and the electrical properties of amorphous tin-doped indium oxide (ITO) films have been studied in contrast with those of undoped indium oxide (IO) films. Amorphous ITO and IO films were prepared by magnetron sputtering succeeded by annealing in the air at various temperatures. ITO films showed higher crystallization temperature compared with that of IO films, suggesting an excess free energy caused by the repulsion between the active donors ($Sn^{4+}$). The analysis of the electrical properties alternated with the phased annealing of films provided essential information for understanding the conduction mechanisms of ITO. It was also revealed that the amorphous IO/ITO films showed oxidation around $100^{\circ}C$ in contrast with crystalline IO/ITO films with the oxidation temperature above $200^{\circ}C$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1196-1200
• /
• 2003

The degree of supersaturation is an important measure for the operation of crystallization processes, because it is directly related to the control of crystal size distribution and shape. A conventional technique utilizing solution composition and temperature has a variety of problems caused from the measurement error and the handling of analyzing samples. A monitoring system of the supersaturation using a quartz crystal sensor is proposed here, and its performance is examined applying different manipulations of coolant temperature. The experimental outcome and photographic examination indicate that the measurements of resonant frequency and resistance of the sensor can be used for the prediction of the formation and growth of solid crystal from the crystallization process. The monitoring system eliminates the intrinsic error source of the conventional system to give the improved measurement and on-line application availability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.69-69
• /
• 2009

In other to progress better crystallization transition and long phase-transformation data of phase-change memory (PRAM), we investigated about the effect of Sb doping and Ag ions percolating into Ge-Se-Te phase-change material. Doped Sb concentrations was determined each of 10 wt%, 20 wt% and 30 wt%. As the Sb-doping concentration was increased, the resistivity decreased and the crystallization temperature increased. Ionization of Ag was progressed by DPSS laser (532 nm) for 1 hour. The resistivity was more decreased and the crystallization temperature was more increased in case of adding Ag layer under Sh-(Ge-Se-Te) thin film. At the every condition of thin films included Ag layer more stable states were indicated compare with just Sh-doped Ge-Se-Te thin films.

• Journal of the Korean Ceramic Society
• /
• v.29 no.12
• /
• pp.956-962
• /
• 1992

The predominant sintering mechanisms of low firing temperature ceramic substrate which consists of borosilicate glass containing alumina as a filler are the rearrangement of alumina particles and the viscous flow of glass powders. In this system, sintering condition depends on the volume ratio of alumina to glass and on the particle size. When the substrate contains about 35 vol% alumina filler and the average alumina particle size is 4 $\mu\textrm{m}$, the best firing condition is obtained at the temperature range of 900∼1000$^{\circ}C$. The extensive rearrangement behavior occurs at these conditions, and the optimum sintering condition is attained by smaller size of glass particles, too. The formation of cristobalite during sintering causes the difference of thermal expansion coefficient between the substrate and Si chip. This phenomenon degradates the capacity of Si chip. Therefore, the crystallization should be prevented. In the alumina filled borosilicate glass system, the crystallization does not occur. This effect may have some relation with aluminum ions in alumina. For aluminum ions diffuse into glass matrix during sintering, functiong as network former.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.172-172
• /
• 2003

It has been known that Pd-MILC shows much faster and lower temperature crystallization than Ni-MILC but it can not be put into practice due to the quality issue of thus fabricated poly crystals. In this study, addition of Pd into Ni-MILC has been attempted in order to take advantages of the Pd-MILC without sacrificing of the Ni-MILC TFTs. It turns out that when 5% of Pd has been added to Ni for MILC, MILC growth rate increases two - three times faster than pure Ni-MILC. The MILC growth rate shows monotonic increase with increase the amount of Pd in Ni up to 50%. Even when small amount of Pd was added to Ni like 5%, crystallization phenomenon already follows the way of Pd-MILC. The Poly-W thus fabricated shows lower leakage current than pure Ni-MILC TFT without losing any amount of on-current This fact is very important in low temperature poly-TFTs because MILC-TFTs, especially suffer from the relatively high leakage current