• 제목/요약/키워드: Crystalline Solar cell

검색결과 388건 처리시간 0.029초

단결정 실리콘 태양전지 2차원 모델의 반사율 시뮬레이션 (Two-dimensional model simulation for reflectance of single crystalline silicon solar cell)

  • 이상훈;강기환;유권종;안형근;한득영
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
    • /
    • pp.237-242
    • /
    • 2012
  • At present, crystalline solar cells take up a significant percentage of the solar industry. The ways of increasing the efficiency of crystalline solar cell are texturing and AR(Anti-Reflection) coating, and the purpose of these technologies is to increase the amount of available light on the solar cell by reducing the reflectivity. The reflectance of crystalline silicon solar cell combined with such technologies will be able to predict using the proposed simulation in this paper. The simulation algorithm was made using MATLAB, and it is a combination of the theories of reflection in textured wafer and in anti-reflection coated wafer. The simulation results were divided into three wavelength band and were compared with actual reflectance measured by a spectrometer. The wavelength band from 300 to 380 was named ultraviolet region and the wavelength band from 380 to 780 is named visible region. Finally, the wavelength band from 780 to 1200 named infrared region. When compared with measured reflection data, the simulation results had a small error from 0.4 to 0.5[%] in visible region. The error occurred in the rest two regions is larger than visible region. The extreme error occurred the infrared region is due to internal reflection effect, but in the ultraviolet region, the rationale on reduction phenomenon of reflectance occurred in small range did not proved. If these problem will be solve, this simulation will have high reliability more than now and be able to predict the reflectance of solar cells.

  • PDF

습식 화학 식각에 의한 다결정 실리콘 웨이퍼의 표면 분석 및 효율 변화 (Surface Analysis and Conversion Efficiency of Multi-crystalline Silicon Solar Cell by Wet Chemical Etching)

  • 박석기;도겸선;송희은;강기환;안형근;한득영
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
    • /
    • pp.111-115
    • /
    • 2011
  • Surface Texturing is an essential process for high efficiency in multi-crystalline silicon solar cell. In order to reduce the reflectivity, there are two major methods; proper surface texturing and anti-reflection coating. For texturization, wet chemical etching is a typical method for multi-crystalline silicon. The chemical solution for wet etching consists of HF, $NHO_3$, DI and $CH_3COOH$. We carried out texturization by the change of etching time like 15sec, 30sec, 45sec, 60sec and measured the reflectivity of textured wafers. As making the silicon solar cells, we obtained the conversion efficiency and relationship between texturing condition and solar cell characteristics. The reflectivity from 300nm to 1200nm was the lowest with 15 sec texturing time and 60 sec texturing time showed almost same reflectivity as bare one. The 45 sec texturing time showed the highest conversion efficiency.

  • PDF

레이저를 이용한 결정질 실리콘 태양전지의 Double Texturing 제조 및 특성 (Characteristics of Double Texturization by Laser and Reactive Ion Etching for Crystalline Silicon Solar Cell)

  • 권준영;한규민;최성진;송희은;유진수;유권종;김남수
    • 한국재료학회지
    • /
    • 제20권12호
    • /
    • pp.649-653
    • /
    • 2010
  • In this paper, double texturization of multi crystalline silicon solar cells was studied with laser and reactive ion etching (RIE). In the case of multi crystalline silicon wafers, chemical etching has problems in producing a uniform surface texture. Thus various etching methods such as laser and dry texturization have been studied for multi crystalline silicon wafers. In this study, laser texturization with an Nd:$YVO_4$ green laser was performed first to get the proper hole spacing and $300{\mu}m$ was found to be the most proper value. Laser texturization on crystalline silicon wafers was followed by damage removal in acid solution and RIE to achieve double texturization. This study showed that double texturization on multi crystalline silicon wafers with laser firing and RIE resulted in lower reflectance, higher quantum yield and better efficiency than that process without RIE. However, RIE formed sharp structures on the silicon wafer surfaces, which resulted in 0.8% decrease of fill factor at solar cell characterization. While chemical etching makes it difficult to obtain a uniform surface texture for multi crystalline silicon solar cells, the process of double texturization with laser and RIE yields a uniform surface structure, diminished reflectance, and improved efficiency. This finding lays the foundation for the study of low-cost, high efficiency multi crystalline silicon solar cells.

결정질 실리콘 태양전지에 적용될 스크린 프린팅 기술 개발 동향 : 리뷰 (Screen Printing Method on Crystalline Silicon Solar Cells : A Review)

  • 전영우;장민규;김민제;이준신;박진주
    • Current Photovoltaic Research
    • /
    • 제10권3호
    • /
    • pp.90-94
    • /
    • 2022
  • The screen-printing method is the most mature solar cell fabrication technology, which has the advantage of being faster and simpler process than other printing technology. A front metallization printed through screen printing influences the efficiency and manufacturing cost of solar cell. Recent technology development of crystalline silicon solar cell is proceeding to reduce the manufacturing cost while improving the efficiency. Therefore, screen printing requires process development to reduce a line width of an electrode and decrease shading area. In this paper, we will discuss the development trend and prospects of screen-printing metallization using metal paste, which is currently used in manufacturing commercial crystalline silicon solar cells.

선택적 에미터를 적용한 고효율 결정질 실리콘 태양전지 구조 설계 (Design analysis of high efficiency crystalline silicon solar cell using the selective emitter)

  • 임종근;이원재;문인식;오훈;조은철
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.355-358
    • /
    • 2009
  • This paper presents the technology of selective emitter for high efficiency crystalline silicon solar cell. The effect of selective emitter is analyzed by using the simulation program for solar cell, PC1D. The selective emitter shows better spectral response in short wavelength regions compared to homogeneous emitter. Therefore, the efficiency of solar cell with selective emitter can be improved by changing the sheet resistance from 60 $\Omega/\square$ to 120 $\Omega/\square$. In addition, the power loss of solar cell can be minimized by optimizing width and gap of the finger electrodes on the selective emitter.

  • PDF

RIE 표면 텍스쳐링 모양에 따른 결정질 실리콘 태양전지의 영향 (Influence of Crystalline Si Solar Cell by Rie Surface Texturing)

  • 박인규;윤명수;현덕환;진법종;최종용;김정식;강형동;권기청
    • 한국진공학회지
    • /
    • 제19권4호
    • /
    • pp.314-318
    • /
    • 2010
  • 다결정 실리콘 웨이퍼 표면에 대면적 reactive ion etching (RIE) 장비로 표면 텍스쳐를 형성한 뒤 태양전지를 제작하였다. 웨이퍼 표면에 텍스쳐를 형성하는 것은 광학적 손실을 줄이기 위해 일반적으로 사용되는 방법으로 alkaline etching이 사용된다. 그러나 다결정 실리콘 태양전지의 경우 재료의 결정 방향에 따라 식각되는 alkaline etching은 텍스쳐링의 모양을 제어할 수 없어 효과적이지 못하다. 이와 달리 플라즈마 식각방법을 사용하면 표면 텍스쳐의 모양을 효과적으로 제어하여 조금 더 낮은 반사율을 얻을 수 있다. 하지만 텍스쳐 모양 조절로 얻은 낮은 반사율이 항상 높은 변환효율을 얻을 수 있는 것은 아니다. 본 연구에서는 대면적 RIE 공정 조건별로 얻은 태양전지 표면 텍스쳐의 모양에 따라 각각의 반사율과 양자효율 및 변환효율이 미치는 영향을 살펴보았다.

장기 Outdoor Test를 통한 CPV와 PV 모듈의 발전량 비교분석 (A study of Comparative Analysis of CPV and PV Module through Long-term Outdoor Testing)

  • 김민수;이유리;조민제;오수영;정재학
    • Current Photovoltaic Research
    • /
    • 제5권1호
    • /
    • pp.33-37
    • /
    • 2017
  • Today, photovoltaic power generation mostly uses Si crystalline solar cell modules. The most vulnerable part of the Si solar cell module is that the power generation decreases due to the temperature rise. But, it is widely used because of low installation cost. In the solar market, where Si crystalline solar cell modules are widely used. The CPV (Concentrated Photovoltaic) module appeared in the solar market. The CPV module reduces the manufacturing cost of the solar cell by using non-Si in the solar cell. Also, there is an advantage that a rise in temperature does not cause a drop in power generation. But this requires high technology to install and has a disadvantage that the initial installation cost is expensive compared to normal Si solar cell module. So that we built a testbed to see these characteristics. The testbed was used to measure the amount of power generation in a long-term outdoor environment and compared with the general Si solar cell module.

PC1D Simulation을 통한 결정질 실리콘 태양전지의 국부적 후면 전극 최적화 설계 (An optimal design for the local back contact pattern of crystalline silicon solar cells by using PC1D simulation)

  • 오성근;임충현;조영현
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.43.1-43.1
    • /
    • 2010
  • In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

  • PDF

Advances in Crystalline Silicon Solar Cell Technology

  • Lee, Hae-Seok;Park, Hyomin;Kim, Donghwan;Kang, Yoonmook
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.82-82
    • /
    • 2015
  • Industrial crystalline silicon (c-Si) solar cells with using a screen printing technology share the global market over 90% and they will continue to be the same for at least the next decade. It seems that the $2^{nd}$ generation and the $3^{rd}$ generation technologies have not yet demonstrated competitiveness in terms of performance and cost. In 2014, new world record efficiency 25.6% (Area-$143.7cm^2$, Voc-0.740V, $Jsc-41.8mA/cm^2$, FF-0.827) was announced from Panasonic and its cell structure is Back Contact $HIT^*$ c-Si solar cell. Here, amorphous silicon passivated contacts were newly applied to back contact solar cell. On the other hand, 24.9% $TOPCon^{**}$ cell was announced from Fraunhofer ISE and its key technology is an excellent passivation quality applying tunnel oxide (<2 nm) between metal and silicon or emitter and base. As a result, to realize high efficiency, high functional technologies are quite required to overcome a theoretical limitation of c-Si solar cell efficiency. In this presentation, Si solar cell technology summarized in the International Technology Roadmap for Photovoltaics ($^{***}ITRPV$ 2014) is introduced, and the present status of R&D associated with various c-Si solar cell technologies will be reviewed. In addition, national R&D projects of c-Si solar cells to be performed by Korea University are shown briefly.

  • PDF

그라파이트 기판을 이용한 유연 박막 실리콘 태양전지 특성 향상 (Performance Improvement of Flexible Thin Film Si Solar Cells using Graphite Substrate)

  • 임경열;조준식;장효식
    • 한국재료학회지
    • /
    • 제29권5호
    • /
    • pp.317-321
    • /
    • 2019
  • We investigated the characteristics of nano crystalline silicon(nc-Si) thin-film solar cells on graphite substrates. Amorphous silicon(a-Si) thin-film solar cells on graphite plates show low conversion efficiency due to high surface roughness, and many recombination by dangling bonds. In previous studies, we deposited barrier films by plasma enhanced chemical vapor deposition(PECVD) on graphite plate to reduce surface roughness and achieved ~7.8 % cell efficiency. In this study, we fabricated nc-Si thin film solar cell on graphite in order to increase the efficiency of solar cells. We achieved 8.45 % efficiency on graphite plate and applied this to nc-Si on graphite sheet for flexible solar cell applications. The characterization of the cell is performed with external quantum efficiency(EQE) and current density-voltage measurements(J-V). As a result, we obtain ~8.42 % cell efficiency in a flexible solar cell fabricated on a graphite sheet, which performance is similar to that of cells fabricated on graphite plates.