• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.13-17
• /
• 2006

The effect of the addition of the nano size $Y_2O_3$ powder on the microstructurte and superconducting properties of YBCO thin film deposited on LAO single crystalline substrate by TFA-MOD method was studied. Nano size $Y_2O_3$ powder was added to the stoichiometric precursor solution with a cation ratio of Y : Ba . Cu = 1 : 2 : 3 prepared using TFA as chelating agent. Precursor solutions with and without $Y_2O_3$ addition were coated on $LaAlO_3(100)$ single crystalline substrates by dip coating method. Calcination and conversion heat treatments were performed in controlled atmosphere containing moisture Current carrying capacity(Jc) of YBCO film was enhanced about 50% by $Y_2O_3$ doping and it is thought to be due to the better connectivity of YBCO grains and/or the flux pinning by the $Y_2O_3$ particles embedded in YBCO grains.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.598-602
• /
• 2010

When metal oxides are added into crystalline glaze, colors of glaze and crystals are similar as colorants generally. But the case of NiO in zinc crystalline glaze is different from general color development. When NiO is added to zinc crystalline glaze it can develop two or three colors. The active use of color development mechanism by adding NiO to the zinc crystalline glaze to control color of the base glaze and crystal with stability is investigated. This report is expected to contribute to the ceramic industry in improving application of zinc crystalline glaze. For the experiment of NiO, the quantity of NiO additives is changed to the base glaze for the most adequate formation of willemite crystal from previous research and firing condition: temperature increasing speed $5^{\circ}C/min$, holding 1 h at $1270^{\circ}C$, annealing speed $3^{\circ}C/min$ till $1170^{\circ}C$, holding 2 h at $1170^{\circ}C$ then naturally annealed. The samples are characterized by X-ray diffraction (XRD), UV-vis, and Micro-Raman. The result of the procedure as follows; Ni substitutes for Zn ion then glaze develops blue willemite crystals, as if cobalt is used, on brown glaze base. When NiO quantity is increased to over 5 wt%, willemite size is decreased, and the density of the crystal is increased, at the same time $Ni_2SiO_4$ (olivine) phase, the second phase, has been developed. The excessive NiO is reacted with silicate in the glass then developed green $Ni_2SiO_4$ (olivine), and quantity of $Ni_2SiO_4$ (olivine) is increased as quantity of willemite is decreased. It is proved to create three colors, blue, brown and green by controlling the quantity of NiO to the zinc crystalline glaze and it will improve the multiple use of colors to the ceramic design.

• 한국결정성장학회지
• /
• 제31권6호
• /
• pp.240-246
• /
• 2021

도자 생산현장에서 아연결정유약을 제조하여 사용할 때 조성원료에 따라 유약의 결정생성이 불안정하고, 특히 결정이 잘 생성되는 유약도 습식제조 후 시간이 경과하면 결정생성이 급격히 저하되는 문제점이 있다. 도예가들이 주로 사용하는 산화아연(ZnO)과 하소아연(calcined ZnO), 프리트 3110, 그리고 규석을 출발 물질로 3성분계 실험을 통하여 아연결정 조성을 선택하고 선 연구된 소성 조건을 사용하였다. 유약을 제조하고 1일~24주까지 습식으로 보관하면서 침수 과정에서 아연이 아연결정유의 결정생성에 미치는 영향을 규명하고자 하였다. 원료 입도 및 침수 영향을 측정하기 위해 입도분석, XRD, Raman Spectroscopy 그리고 SEM 분석 등을 하였다. 연구결과, 산화아연은 습식으로 유약 사용 시 willemite 결정 생성 및 성장이 우수하지만 유약을 보관하는 동안 ZnO가 물과 반응하여 Zn(OH)2를 생성하고 응집되면서 유약내 ZnO량이 감소되어 willemite 생성을 저해하여 결정이 감소됨을 확인하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.65-70
• /
• 1998

The Spray-ICP technique uses the ICP(Inductively Coupled Plasma) of ultra-high temperature which is produced by r.f power. The ICP is well-kwown as a clean heat source for the preparation of pure ceramic particles because the ICP is a electrodeless-thermal plasma without contamination. In this study,{{{{ { SnO}_{2 } }}}} particles were sythesized from metal salt solution by Spray-ICP technique. The effects of concentration of solution, collecting location of powders were investicated. The prepared {{{{ { SnO}_{2 } }}}} particles from each concentration of solution had same crystalline phase(tetragonal {{{{ { SnO}_{2 } }}}}) a nd the mean size decreased in proportion to the increase of solution concentration. Each {{{{ { SnO}_{2 } }}}} p owders collector in reactor and electrostatic collector had same crystalline phase and morphologies. The mean size of {{{{ { SnO}_{2 } }}}} p articles prepared by Spray-ICP technique was below 30nm.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.386-390
• /
• 2007

In order to, simultaneously, synthesize and control the size of microstructure of amorphous/crystalline composites, a repeated extrusion process was performed using the gas atomized $Cu_{54}Ni_6Zr_{22}Ti_{18}$ metallic glass powders and the crystalline brasses. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1182-1186
• /
• 1997

La0.8Ca0.2Cr0.98O3 powder was prepared using the modified Pechini process. Various crystalline phases formed during thermal decomposition were investigated. (La,Ca)CrO4 phase, first formed from the precursor, was transformed to (La,Ca)CrO3 and CaCrO4 above 80$0^{\circ}C$, which remained up to 110$0^{\circ}C$. However, only (La,Ca)CrO3 phase consisting of orthorhombic and intermediate rhombohedral polymorphs was observed after sintering at 125$0^{\circ}C$. The specimens sintered at 140$0^{\circ}C$ exhibited 98% of relative density and rather wide grain size distribution with average grain size of 3-4 ${\mu}{\textrm}{m}$. Densification and grain growth of the specimens observed above 125$0^{\circ}C$ were presumably attributed to liquid phase sintering resulted from melting of Ca3(CrO4)2 phase.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.120-125
• /
• 2002

Si-wafers for solar cells were cast in a size of $50{\times}46{\times}0.5{\textrm}{mm}^3$ by vacuum casting method. The graphite mold coated by BN powder, which was to prevent the reaction of carbon with the molten silicon, was used. Without coating, the wetting and reaction of Si melt to graphite mold was very severe. In the case of BN coating, SiC was formed in the shape of tiny islands at the surface of Si wafer by the reaction between Si-melt and carbon of the graphite mold on the high temperature. The grain size was about 1 mm. The efficiency of Si solar cell was lower than that of Si solar cell fabricated on commercial single and poly crystalline Si wafer. The reason of low efficiency was discussed.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.220-224
• /
• 2005

Boehmite (AlOOH) powder with uniform pore size and high specific surface area were synthesized via sol-gel method using metal salts, $Al_2(SO_4)_3$ and $NaAlO_2$. During these synthetic process, the effects of the aging time were investigated to determine the optimal synthetic conditions of boehmite. X-ray diffraction, BET, Raman/IR, and scanning electron microscopy techniques were used for the characterization of the powder. Boehmite gel synthesized at the first stage of the experimental procedure transformed to crystalline boehmite phase after aging for 6 hours. The specific surface area of the crystalline boehmite showed a maximum value, $350m^2/g$, at aging time of 72 hours. The pore size of the boehmite increased with increasing aging time and the boehmite with average pore diameter of 3.6 nm was obtained at aging time of 96 hours.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.20-20
• /
• 2003

A new and simple method has been developed to synthesize highly crystalline and monodisperse maghemite (γ-Fe₂O₃) and zirconia (ZrO₂) nanocristallites. High temperature aging of metal-surfactant complex was founded to generate monodisperse nanoparticles, wherein the nuclei were prepared by the thermal decomposition of iron-oleate complex in case of iron oxide and nonhydrolytic sol-gel reaction in case of zirconia respectively. By varying the experimental conditions, in other words concentration of surfactants, kind of metal precursor, reaction temperature and so on, the diameter of spherical nanoparticles could be controlled at various size. The synthesized nanoparticles were characterized by electron diffraction, X-ray diffraction, and low- and high-resolution transmission electron microscope.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.16-23
• /
• 1996

In order to know the change of weight loss, crystallinity, crystallite size(010) plane, and thermal properties of PET films which had before drawn and annealed at various temperature. It were treated in sodium triethylene glycolate-triethylene glycol(STEG-TEG) were prepared. The following results were abtain. The weight loss of PET films were increasing with increaing treated time in STEG-TEG solution and It showed a linear rlationship to the treated time. The crystallinity and crystallite size(010) plane of PET films decreased with increasing decomposition ratio when PET films were treated with before annealed under 16$0^{\circ}C$. The crystalline region on the surface of samples were decompose to thermal unstable crystalline structure