• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1401-1413
• /
• 1994

The synthesis of kaolinite mineral from domestic diatomite for silica resource, commercial vailable gibbsite or alumina for alumina resource were made under various hydrothermal treatment, and the sythetic effect of acidic mineralizers, temperature treatment with time duration, particle size of alumina on formation of kaolinite mineral and the plastic properties of synthesized kaolinite were investigated. The various acidic mineralizers which are HCl, HNO3, H2SO4 and Oxalic acid were employed for hydrothermal reaction in the range of 0.01 mol/ι to 2 mol/ι concentration of each mineralizers. It was found that HCl in the level of 1 mol/ι solution produced highly yields of well-crystallized and platy form kaolinite mineral and gave the most effective extraction of iron oxide, compared to that of others, that HNO3 produced highly yield of kaolinite but lower extraction of iron oxide, that H2SO4 produced low yield of kaolinite and formed alunite mineral, and that oxialic acid formed spherical crystalline kaolinite and gave low extraction of iron oxide. Moreover, it showed that kaolinite minerals were well synthesized in a wide range of less than 2 mol/ι acids, but were poorly synthesized at more than 2 mol/ι acids. However, boehmite and kaolinite were coexistently formed in the temperature range of 18$0^{\circ}C$ and 20$0^{\circ}C$ when the calcined diatomite and gibbsite were involved. The well-ordered kaolinite mineral as a platy form was highly synthesized in the temperature range of 220 and 24$0^{\circ}C$, when the same marterials as above were used with treatment of 1 mol/ι HCl solution. The results also revealed that the size of crystalline platy form kaolinite, synthesized from alumina and calcined diatomite with treatment in 1 mol/ιHCl solution at 24$0^{\circ}C$, was much larger than that of gibbsite and calcined diatomite shown previously, and that kaolinite and corundum minerals were coexistently formed under any hydrothermal treatment conditions. The plasticity of synthesized kaolinite from under 2 ${\mu}{\textrm}{m}$ alumina and calcined diatomite was very poor, and that of the synthesized kaolinite from raw diatomite and gibbsite gave higher than that of calcined diatomite and gibbsite.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.65-72
• /
• 2012

본 연구에서는 비정질 실리콘의 알루미늄 유도 결정화(AIC)가 시도되었다. 결정질 실리콘의 좀 더 큰 입자를 얻기 위해, 선택적인 핵생성(Selective nucleation) 시도는 비정질 실리콘 밑의 실리카($SiO_2$) 층의 습식 파우더 분사 처리와 함께 진행됐다. 또한 니켈 층은 실리콘 원자가 알루미늄 층으로 이동하는 것을 방지하기 위한 확산 방지막(Diffusion barrier)으로 선택되었다. $520^{\circ}C$에서 열처리를 한 후에 XRD 분석을 통해 Si(111) 방향으로 결정화된 결정질 실리콘을 확인했고 니켈은 실리콘과 알루미늄 사이의 확산 방지막으로 매우 효과적인 재료라는 것을 입증하였다. 이 연구는 고성능의 태양전지에 적용하는 결정질 실리콘 막의 좀 더 큰 입자를 얻기 위한 방법 중의 하나라고 기대된다.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.699-708
• /
• 2015

This study was performed to identify the state of the exposure and characteristics of pollutants by each process at 4 casting sites located in Gyeongsang-do from April to November 2013. The concentrations of methanol, crystallized silica glass, formaldehyde and phenol were analyzed by different process - casting process, molding process, core process, and shakeout & finishing process. The highest concentration of methanol was found in casting and molding process, whereas the highest concentration of crystalline quartz(Silica) was observed in core process. The most oxidized steel dusts and the highest concentration of fume were found in shakeout & finishing process. As a result of this study, those labors working at the casting site were found to be constantly exposed to various forms of hazardous chemicals; therefore, it is considered that this is the time to manage and plan how to reduce them. In addition, it is required to thoroughly manage the local exhauster, and improve the process and working environment to reduce various forms of hazardous chemicals.

• 한국환경보건학회지
• /
• 제35권2호
• /
• pp.130-142
• /
• 2009

This study compared FTIR with XRD method for the analysis of quartz by % recovery, coefficient of variation (CV) and influence of the interference. the results were as the following. 1. In FTIR method, the coefficient of determination ($r^2$) was 0.9998 in a calibration curve of $695\;cm^{-1}$, and the limit of detection was $4.9{\mu}g/sample$. 2. The highest recovery was $799\;cm^{-1}$ (98.2%). 3. The CVpooled of the FTIR method was approximately 10% in three wave numbers. 4. The analysis of qualitative and quantitative for quartz is difficult with mixed cristobalite and iron oxide. 5. In XRD method with rotating sample holder and LynxEye detector, the coefficient of determination was 0.9996 in a calibration curve, and the limit of detection was $5.9{\mu}g/sample$. 6. The recovery and CV pooled were 104.3%, and 11 %, respectively. 7. In muffle furnace ashing, the quartz weight decreased to 34% when the maximum weight of the iron oxide was more than eight times. In conclusion, the accuracy (% recovery) and precision (CV) of FTIR and XRD method for analyzing $\alpha$-quartz were similar. FTIR method was a disadvantage for sample matrix because it indicates possibility of interference. However, XRD method distinguished specific crystalline forms of silica, and the majority of silicate minerals. In addition, XRD method recommend filter dissolution to pretreatment method.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.381-390
• /
• 2015

Investigating the microstructure of hardened cement mixtures with the aid of advanced technology will help the concrete industry to develop appropriate binders for durable building materials. In this paper, morphological, mineralogical and thermogravimetric analyses of autoclave-cured mixtures incorporating ground dune sand and ground granulated blast furnace slag as partial cementing materials were investigated. The microstructure analyses of hydrated products were conducted using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), differential thermal analysis (DTA), thermo-graphic analysis (TGA) and X-ray diffraction (XRD). The SEM and EDX results demonstrated the formation of thin plate-like calcium silicate hydrate plates and a compacted microstructure. The DTA and TGA analyses revealed that the calcium hydroxide generated from the hydration binder materials was consumed during the secondary pozzolanic reaction. Residual crystalline silica was observed from the XRD analysis of all of the blended mixtures, indicating the presence of excess silica. A good correlation was observed between the compressive strength of the blended mixtures and the CaO/$SiO_2$ ratio of the binder materials.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.610-615
• /
• 2001

Over 800 thousand tons per year (TPY) agricultural biowastes, such as sugar cane bagasse, sugarcane leaf, rice straw, rice husk and corn leaf, are produced in Taiwan. These biomasses are the major types of agricultural wastes and are abundantly available. However, these biowastes cause disposal and landfill problems. Ossification ashes of the agricultural biowastes containing 70-95 % amorphous silica would make the utilization system of agricultural biowaste ashes become highly economically and environmentally attractive. Experimentally, high crystallinity (99%$^{+}$) zeolites ZSM-5 and ZSM-48 synthesized from the reaction mixtures containing a silica source from ashes of these biowastes gasification were investigated. Tetrapropylammonium bromide (TPABr) and 1,6-diamino-hexane (C$_{6}$ DN) were used as structure-directing agents in syntheses of ZSM-5 and ZSM-48, respectively. X-ray powder diffraction (XRD) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDX) data indicated that ZSM-5 or ZSM-48 with a high crystallinity can be obtained within 48 hours of crystallization in the high pressure (15-20 atm) autoclave at 393-473 K. The Si/Al ratios of synthetic zeolite products were determined by X-ray fluorescence (XRF) and induced couple plasma/mass spectroscopy (ICP/MS). It was observed that the ZSM-5 crystals a.e composed of hexagonal rod-shaped crystals with typically 8-13 пm in size by SEM. In addition, ZSM-48 crystalline materials are composed of spherical aggregates of needle-shaped or rod-like crystals with typically 2-3 пm in diameter and 6-8 пm in length.h.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.210-214
• /
• 2012

Mass production-capable $Li_2MnSiO_4$ powder was synthesized for use as cathode material in state-of-the-art lithium-ion batteries. These batteries are main powder sources for high tech-end digital electronic equipments and electric vehicles in the near future and they must possess high specific capacity and durable charge-discharge characteristics. Amorphous silicone was quite superior to crystalline one as starting material to fabricate silicone oxide with high reactivity between precursors of sol-gel type reaction intermediates. The amorphous silicone starting material also has beneficial effect of efficiently controlling secondary phases, most notably $Li_xSiO_x$. Lastly, carbon was coated on $Li_2MnSiO_4$ powders by using sucrose to afford some improved electrical conductivity. The carbon-coated $Li_2MnSiO_4$ cathode material was further characterized using SEM, XRD, and galvanostatic charge/discharge test method for morphological and electrochemical examinations. Coin cell was subject to 1.5-4.8 V at C/20, where 74 mAh/g was observed during primary discharge cycle.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.217-221
• /
• 2011

Glass-ceramic materials, which consist of glass matrix phase containing crystalline ${\beta}-Ca_3(PO_4)_2$ and ${\beta}-Ca_2P_2O_7$, have been prepared by heating at $750-900^{\circ}C$ of calcium phosphate invert glasses in the silica-free $CaO-P_2O_5-TiO_2-Na_2O$, system. With increasing heating temperature from 750 to $900^{\circ}C$, the crystallite size of precipitated ${\beta}-Ca_3(PO_4)_2$ in glass with $55CaO{\cdot}35P_2O_5{\cdot}3TiO_2{\cdot}7Na_2O$ (mol%) composition increased from 48 to 91 nm. With the extension of the immersion time in dilute acetic acid solution (pH = 5) to ${\geq}$200 min, the degree of dissolution of $Ca^{2+}$ and $P^{5+}$ ions in the glass-ceramics was linearly increased and the solution was constantly maintained at pH = ~7. Biomimetic nanostructured (62-88 nm in average dia.), sphere-shaped hydroxyapatite was homogeneously formed on the surface of the glass-ceramics when socked for 7-14 days in a Hanks' solution, indicating bioactivity of the prepared glass-ceramics.

• 자원환경지질
• /
• 제35권1호
• /
• pp.13-23
• /
• 2002

화강암지역에서 산출되는 국내 지하수의 화학조성은 주로 Ca-HCO$_{3}$와 Na-HCO$_{3}$, 형에 속하며, 일부는 Ca-(C1+SO$_{4}$)또는 Na-(Cl+SO$_{4}$)형의 특성을 나타낸다. 회장암 지역의 용출수는 Ca-HCO$_{3}$ 형에, 지하수는 Na-HCO$_3$ 형에 도시된다. 빗물-화강암 반응에 대한 반응경로 모델링 결과는 초기 Ca-Cl형에서 시작하여 Ca-HCO$_{3}$을 거친 후, 최종적으로 Na-HCO$_{3}$형으로 진화하는 경향을 보인다 빗물-화장암 반응 역시 빗물-화장암 반응에서와 유사하게 진화되는 경향을 보이며, 모델링 결과는 현장자료와 잘 일치된다. 빗물-화장암/회장암 반응경로 모델링 결과, 반응이 진행됨에 따라 수소이온 활동도는 점차 감소(pH는 증가)하며, 양이온의 농도는 pH의 변화에 따른 모암을 구성하는 광물들의 순차적 용해, 2차 생성광물의 침전 및 재용해 등에 의해 다양한 농도변화를 보여준다 빗물-화강암의 반응비에 따라 깁사이트, 적철석, 망간산화물, 카오리나이트, 실리카, 녹니석, 백운모, 방해석, 로몬타이트, 프레나이트, 아날심의 순으로 침전이 발생하며, 빗물-회장암의 반응에서도 이와 동일한 침전순서를 보이지만 실리카의 침전이 없고 아날심 대신 파라고나이트가 침전된다. 빗물-화강암 반응에서는 실리카가 가장 우세한 광물이며, 밋물-회장암 반응에서는 카오리나이트가 가 장 우세한 광물이며, 전체적인 2차 생성광물의 침전량은 화강암보다 회장암 반응이 더 우세하다

• 멤브레인
• /
• 제25권6호
• /
• pp.530-537
• /
• 2015

태양광 발전시스템은 태양복사에너지를 반도체의 광전효과를 이용하여 전기에너지로 직접 전환시키는 에너지변환 시스템이다. 태양전지의 내구성과 에너지변환율에 영향을 미치는 핵심소재로는 다층형 필름구조를 갖는 백시트를 들 수 있다. 대표적인 상용 백시트는 고내구성 poly(vinyl fluoride) (PVF) 필름이 중심축에 위치하고 가격저감을 위해 도입된 poly(ethylene terephthalate) (PET) 필름이 그 양쪽에 접합된 삼층구조로 구성된다. 하지만, PVF 필름의 높은 가격은 저렴한 고내구성 백시트를 요구하는 시장상황을 반영하기 어렵게 한다. 이를 위한 해결책으로는 PVF 필름을 결정성 PET 필름으로 대체한 탄화수소계 백시트가 될 수 있다. 하지만, PET 필름의 본질적인 가수분해에 대한 취약성으로 인해, 추가적인 수분에 대한 배리어성 부여는 필수적이다. 이를 위해 본 연구에서는 소수성 실리카 나노입자 분산기술을 활용한 수분차단성 폴리우레탄 접착제를 개발코자 하였다. 개발된 접착제는 내부에 위치한 PET 필름으로의 수분침투를 약화시켜, 가수분해속도를 지연시킬 것이라 기대되었다. 본 개념의 효용성을 확인하기 위해, 표준화된 온습도조건에 노출된 이후의 일반접착제와 수분차단성 접착제가 도입된 백시트의 기계적 강도 및 시간당 태양전지성능 변화가 비교평가되었다.