• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.111-111
• /
• 2000

In order to form a uniform oxidation layer and spinel crystalline phase that has been help strong bonding in Kovar(Fe-29Ni-17Co)-to-glass sealing, the humidified nitrogen and nirtogen/hydrogen mixture was used as an oxidation atmosphere. Kovar oxidation was diffusion-controlled reaction and the activation energy was 25~32 kcal/mol at $600~900^{\circ}C.$ After oxidation at $600^{\circ}C, $ the oxidation layer was under 1 $\mu\textrm{m}$ thickness and crystalline phase was spinel which was found to be suitable for the Kovar-to-glass sealing. The Kovar-to-glass seal was carried out at $1010^{\circ}C$ and humidified nitrogen/hydrogen mixture atmosphere. Sealing properties were tested by Leak tester and SEM.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.117-121
• /
• 2000

Er-doped sodiumborosilicate glass films for waveguides amplifier were fabricated by Aerosol Flame Deposition(AFD) method. Al2O3 was added to sodium borosilicate glass films to suppress the formation of crystalline phase and control the refractive index. the formation of crystalline phase was suppressed above Al2O3 of 6 wt%. As the amount of Al2O3 increased from 2 to 12 wt% the refractive index of glass films increased lineary from 1.4595 up to 1.4710. After the core of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3＋8wt%Er2O3 was coated on the buffer layer of 77SiO2-15B2O3-8Na2O＋6 wt%Al2O3, the core was etched by reactive ion etching. The absorption spectrum of 3 cm waveguide amplifier showed two peaks of 1530 and 1550 nm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1896-1901
• /
• 2008

Single crystalline copper nanowires are subjected to bending tests using molecular dynamics simulations and the embedded atom method. To observe behaviors of nanowire, bending tests are performed for various rates of deflection and different boundary conditions: fixed-free and fixed-fixed. When the deflection of nanowire becomes large, twinnings and dislocations appear, and <100> crystal structure transforms to <110>. At high rates, phase transformation occurs in whole nanowire. But, at low rates, atomic structure changes to <110> phase partially. The final deformed structures are affected by the rate of deflection and boundary conditions. These effects can be important design parameters at nanoscale.

• 유변학
• /
• 제9권4호
• /
• pp.200-205
• /
• 1997

등방상에서는 폴리파라페닐렌테레프탈아미드(PPD-T)와 히드록시 프로필 셀룰로오 스(HPC)가 비슷한 유변학적 거동을 보였다. 그러나 이방성에서는 네마틱상을 형성하는 PPD-T와 콜레스테릭상(또는 꼬인 네마틱상)을 형성하는 HPC는 상이한 유변학적 특성을 나타냈다. 이방상을 나타내는 임계농도(C*)이상의 농도에서 Herchel-Bulkey 모델에 의해 얻 어진 항복응력을 보면 HPC의 경우 농도에 관계없이 거의 일정한 값을 나타낸 반면PPD-T 의경우에는 농도증가와 더불어 항북응력값이 크게 증가하였다. 또한 PPD-T가 일\ulcorner거으로 HPC보다 큰값의 항복응력을 나타냈다. 진동수 1 rad/s 에서는 PPD-T와 HPCahen 탄성계 수 G＇/2G＂가 농도의 증가와 더불어 증가하엿다. 그러나 100rad/s 에서는 HPCdmlruddn 임계농도이상의 농도에서 농도증가와 더불어 탄성계수값이 단순감소한 반면 PPD-T의 경우 에는 포화농도(B-point)이상의 농도에서 농도증가와 더불어 탄성계수값이 계속적으로 증가 하였다. HPC의 경우 저장탄성률이 변형정도의 영향을 받지 않았으나 PPD-T의 경우에는 저장탄성률이 변형정도에 매우 민감하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 학술발표초록집
• /
• pp.12-12
• /
• 1987

To improve the fibrillation phenomenon and processibili to of poly(p-phenyleneterephthalamide) (PPD-T) , a P/E copolyamide was prepared by introducing 4,4'-ethylene dianiline (EDA) into rigid chain backbone. The effects of semi-flexible segment on the liquid crystalline properties were investigated. The EDA, used as a comonomer, was prepared by catalylitic reduction of p,p'-dinitrophenyl , obtained by oxidative coupling of p,p'-dinitrotoluene. Various high molecular weight PIE copolyamides were prepared by low temperature solution polycondensation of terephthaloyl chloride (TPC) with various mixtures of p-phenylene diamine (PPD) and EOA. The PfE copolyamides were completely dissolved in 100% svlfuric acid, and the phase transition of P/E copolyamide-sulfuric acid systems was examined in teams of concentration and temperature. Over the chemical compositions, PIE=911, 812, and 713, solutions of anisotropic single phase were acquired. In particular, the two mixing ratios, 911 and 812, gave a good anisotropic spinning dope.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.553-557
• /
• 2005

The nature of the phase transition in nematic liquid crystalline elastomer is investigated using NMR and calorimetry. The balance between ordering and disordering effects of the polymer network is identified as crucial for the behavior of the order parameter near the phase transition. The change from supercritical to critical regime with adding low molecular weight liquid crystal to the elastomer is proven.

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1228-1234
• /
• 1999

In order to form a uniform oxidation layer and spinel crystalline phase that was supposed to help strong bonding in Kovar(Fe-29Ni-17Co)to-glass sealing the humidified nitrogen (2.3%H2O/N2) was used as an oxidation atmosphere. Kovar oxidation was diffusion-contolled and the activation energy was 2.51 kcal/mol at 600-900$^{\circ}C$ After oxidation at 600$^{\circ}C$ the oxidation layer was under 1$\mu\textrm{m}$ thickness and crystalline phase was spinel which was found to be suitable for the Kovar-to-glass sealing.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1331-1336
• /
• 1995

The glass-ceramics for ferro-electric were made from compositions of 70PbO.16TiO2.8SiO2.4B2O3.2AlPO4 (wt%) and 67.5PbO.20TiO2.8.5SiO2.2B2O3.2AlPO4 (wt%). The crystallization kinetics for PbTiO3 crystalline phase formation from glass was studied using non-isothermal DSC techniques. The values of activation energy, ΔE using variables of heating rate and temperature were calculated at various reaction fractions obtained from peak area over DSC. The results indicated that activation energy was lowest at 60% reaction fractions and the activation energy of glass containing 20.0 wt% TiO2 is higher than that of glass containing 16.0 wt% TiO2. The crystallization mechanism was three dimensional growth (n=4).

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.765-772
• /
• 1992

As the fundamental research of preparation of fine single crystalline ferroxplana by means of glass-crystallization methods using steel twin-roller the properties of ferroxplana extracted from cyrstallized glass were studied. Most of all the specimens quenched by twin-roller at about 1350$^{\circ}C$ were glass phase, the crystallization of these glass had multi-steps and ferroxplana phase was only stable untill 900$^{\circ}C$, began to be decomposed from about 950$^{\circ}C$ in glass. The morphology of particle could be controlled by the composition and crystallization condition, and Zn2+ was replaced by reduced Fe2+ which is 2∼3% contents of total Fe. Ferroxplana extracted had such magnetic properties as Ms=34 emu/g, mHc=10 Oe and Curie Temperature, Tc=425K.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1982-1988
• /
• 2009

$TiO_2$ films are fabricated using silk printing method. Heat treatment temperature of films is 600[$^{\circ}C$]. From the analysis of microstructure, grain size of $TiO_2$ films is about $0.2{\sim}0.3[{\mu}m]$. Thickness of films is 30.19[${\mu}m$] and surface uniformity of films is good. From the analysis of crystalline structure, $TiO_2$ films transform anatase phase to rutile phase. Capacitance of films increases according to increase relative humidity and decrease measuring frequency. Hysteresis characteristics of capacitance and impedance are best at 45[%RH] and 75[%RH] respectively. Impedance of films increases according to decrease measuring frequency.