• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.62-67
• /
• 2009

Friction stir welding (FSW) was carried out for Al-Mg-Si series aluminum alloys which are being used for automotive body structure. Consequently, Post weld heat treatment (PWHT) was applied to the friction stir welds to evaluate the effect of the paint baking process which is one of the automotive fabrication process on friction stir welded zone (FSWZ) in 443K for 1.2Ks. Grain structure and its crystal orientation distribution was measured about both the as welded specimens and the post weld heat treated specimens. An optical microscope (OM) and an field emission scanning electron microscope (FE-SEM) was used for observing the grain structure and measuring its crystal orientation distribution, respectively. Changes on the grain structure and its crystal orientation distribution were not detected. From the present results, it was confirmed that the paint baking process after FSW do not affect on the grain structure and its crystal orientation distribution of FSWZ. The comprehensive investigations will be performed for various automotive aluminum alloys manufactured by different processes, in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1036-1038
• /
• 2001

The sapphire orientation dependence of the crystallization of ZnO thin films has been studied using real-time synchrotron x-ray scattering. The amorphous ZnO thin films with a 2400-${\AA}$-thick were grown on sapphire(110) and sapphire(001) substrates by radio frequency magnetron sputtering at room temperature. The amorphous ZnO films were crystallization into epitaxial ZnO(002) grains both on the sapphire(110) and on the sapphire(001) substrates. The epitaxial quality, such as mosaic distribution and crystal domain size, of the ZnO grains on the sapphire(110) is high, similar to that of the ZnO grains on the sapphire(001). With increasing the annealing temperature to 600$^{\circ}C$, the mosaic distribution and the crystal domain size of ZnO(002) grains in the film normal direction was improved and decreased, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 추계학술대회논문집
• /
• pp.149-152
• /
• 1999

The effect of initial orientation on the microstructure and texture evolution of two ferritic stainless steels was investigated. the columnar and equiaxed crystal specimens which were prepared from continuous casting slab were hot rolled annealed cold rolled and annealed respectively. The rolling and recrystallization textures at each process stage were examined by orientation distribution function (ODF) and electron back-scattered diffraction (EBSD); The observation showed that the orientation density of the $\alpha$-fibre of hot rolled band of columnar crystal specimen was more pronounced than that of the equaxed one at the center layer. Nevertheless the cold rolled textures of Type 430 steel have demonstrated a rather similar development . Compared to Type 430 steel the development of the $\alpha$-fibre in the center layer of Type 409L steel was much more pronounced. The relation between texture evolution and ridging behaviour has been discussed.

• Journal of Information Display
• /
• 제4권2호
• /
• pp.29-34
• /
• 2003

We have studied liquid crystal (LC) molecular alignment on rubbed and photoaligned surfaces. Particular attention was paid to the intermolecular liquid crystalline interaction. We will first show that uniform molecular orientation on a rubbed surface does not mean spatially uniform interaction between the surface and LC molecules. Rather LCs tend to align themselves through LC interaction. The existence of nonuniformity of rubbing was successfully visualized by double surface treatment. The importance of intermolecular LC interaction was also found in the orientation formation process in 5CB evaporated on rubbed and photoaligned surfaces. By simultaneously analyzing polarized UVNIS absorption and second-harmonic generation (SHG) using the maximum entropy method, we succeeded in obtaining the temporal variation of the orientational distribution functions in the film forming process. The distribution anisotropy and pretilt are found to be generated under the influence of intermolecular LC interaction.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.84-91
• /
• 2005

The role of microstructure is quite significant in fretting of Ti-6Al-4V since its material properties depend strongly on crystallographic texture. In this study, we adopt crystal plasticity theory with a 2-D planar triple slip idealization to account fur microstructure effects such as grain orientation distribution, grain geometry, as well as $\alpha$ colony size. Crystal plasticity simulations suggest strong implications of microstructure effects at fretting contacts.

• 한국광학회지
• /
• 제25권4호
• /
• pp.193-199
• /
• 2014

본 연구에서는 FDTD와 광선추적기법을 결합한 시뮬레이션을 활용해 광원으로 설정된 쌍극자의 진동 방향, 유리기판에 적용된 Mie 산란입자와 Pillow 렌즈가 광결정 구조가 포함된 OLED의 광추출효율에 미치는 영향을 조사하였다. 쌍극자 광원의 진동방향이 OLED 표면에 대해 수평인 경우, 광결정구조만 적용된 OLED의 효율이 54%인데 반해 최적화된 조건의 Mie 산란입자, Pillow 렌즈가 적용된 OLED는 약 86%의 광추출효율을 나타냈다. 아울러 광결정 구조로 인해 특정 각도로 광도가 증가하는 문제점이 Mie 산란입자의 산란효과로 인해 완화될 수 있음을 알았다. 본 연구는 광추출효율을 향상시키는 다양한 광학구조를 적용함과 더불어 발광체 유기분자의 배향을 조절함으로써 OLED의 효율을 큰 폭으로 향상시킬 수 있음을 보여준다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.879-882
• /
• 2008

The discotic liquid crystal in compensating film used for the viewing angle improvement of the twist nematic liquid crystal display panel is analyzed. For the optical characterization of the compensating film, we measured the polarization state of the light passing through the film as the tilt angle and the azimuth angle of the film were varied, and then we compared the measured polarization state with the calculated one. Finally we suggested the best fit configuration of the discotic liquid crystal.

• 열처리공학회지
• /
• 제32권1호
• /
• pp.1-11
• /
• 2019

In this study, microstructure evolution and crystallographic orientation are investigated under various deformation conditions in M1 magnesium alloy. M1 magnesium ingot was rolled at 673 K with the rolling reduction of 30%. The compression test specimens were machined out from rolled plate, and then the specimens were annealed at 823 K for 1h. Uniaxial compression tests were conducted at 723 K and under the strain rate ranging from $5.0{\times}10^{-4}s^{-1}$ to $5.0{\times}10^{-2}s^{-1}$ up to a true strain of -1.0. For observation of crystal orientation distribution, EBSD measurement was performed. Occurrence of the dynamic recrystallization and grain boundary migration were confirmed in all case of the specimens. The distribution of the grains is not uniformed in the experimental conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.42-45
• /
• 2002

General wheel mark in mono-crystalline silicon wafer finding is able to be expected because it depends on radius ratio and angular velocity ratio of wafer and wheel. The pattern is predominantly determined by the contour of abrasive grits resulting from a relative motion. Although such a wheel mark is made uniform pattern if the process parameters are fixed, sub-surface defect is expected to be distributed non-uniformly because of characteristic of mono-crystalline silicon wafer that has diamond cubic crystal. Consequently it is considered that this phenomenon affects the following process. This paper focused on kinematic analysis of wafer grinding process and simulation program was developed to verify the effect of process variables on wheel mark. And finally, we were able to predict sub-surface defect distribution that considered characteristic of mono-crystalline silicon wafer

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1939-1943
• /
• 2003

The precise structural analysis of $SnO_{2}$ thin film, which was prepared by PECVD and thickness 2400 ${\AA}$, was tried to do the structural refinement using X -ray diffraction data. The observed diffraction patterns of $SnO_{2}$ thin film had the strongly preferred orientation effect. WIMV method was used to correct the preferred orientation effect. The final weighted R-factor, $R_{WD}$ was 7.92 %. The lattice parameters, a = b == 4.7366(1) ${\AA}$ and c = 3.1937(1) ${\AA}$, were almost in accordance with ones of $SnO_{2}$ powder.