• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.224-233
• /
• 2002

A common YBCO powder has been made from a mixture of Y123 and Y211 that heated at different temperatures, respectively. The synthesis temperature of Y211 is lower than Y123. If Y211 has been heated as a synthesis temperature of Y123, a particle size of it may be very coarse. It exist as one of main defects for superconductor. But We simultaneously synthesize a YBCO(its composition is (Y123+0.4Y211)+$lwt%CeO_2$) using polymeric complex method. In the YBCO, the Y123 is synthesized lower temperature than other methodes, and its crystal structure is orthorombic. For measurement of these superconducting properties, we fabricated a YBCO single crystal. The manufactured YBCO single crystal is measured a magnetic distribution device using 0.5Tesla magnet and trapped magnet fields in it are 0.2Tesla.

• 대기
• /
• 제23권1호
• /
• pp.39-45
• /
• 2013

A parameterization for the scattering of longwave radiation by ice clouds has been developed based on spectral scattering property calculations with shapes and sizes of ice crystals. For this parameterization, the size distribution data by Fu (1996) and by Michell and Arnott (1994) are used. The shapes of ice crystal considered in this study are plate, solid column, hollow column, bullet-rosette, droxtal, aggregate, and spheroid. The properties of longwave scattering by ice crystals are presented as a function of the extinction coefficient, single-scattering albedo, and asymmetry factor. The heating rate and flux by the radiative parameterization model are calculated for wide range of ice crystal sizes, shapes, and optical thickness. The results are compared with the calculated results using a six-stream discrete ordinate scattering algorithm and Chou's method. The new method (with various habits and size distributions) provides a good simulation of the scattering properties and cooling rate in optically thin clouds (optical thickness < 5). Depending on the inclusion of scattering by ice clouds, the errors in the calculation of the cooling rates are significantly different.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.87-89
• /
• 1997

The BaTiO$_3$ fine powder was prepared by hydrthermal method using titanium tetrahydoxide (Ti(OH)$_4$) and barium dihydroxide (Ba(OH)$_2$.8$H_2O$) as raw materials. The fine powder was obtained at temperatures as low as 160 to 185$^{\circ}C$. The properties of the BaTiO$_3$ powder were studied as a function of various parameters (reaction temperature, reaction time, Ba/Ti=ratio, etc). The average particle size of the BaTiO$_3$ increased with increasing reaction temperature. After hydrothermal treatment at 17$0^{\circ}C$ for 8 h, the average particle size of the BaTiO$_3$ powder was about 30 nm and the particle size distribution was narrow.

• 한국광학회지
• /
• 제19권1호
• /
• pp.43-47
• /
• 2008

현재 TFT-LCD(Thin Film Transistor Liquid Crystal Display)에 사용되는 BLU(Back Light Unit) 패턴 크기는 수 십 ${\mu}m$인데 반해, 최근에는 BLU 패턴의 크기를 수 ${\mu}m$ 또는 그 이하로 조절함으로써 출력광의 휘도를 증가시키고 균일도를 향상시키고자 하는 연구가 진행되고 있다. 본 연구에서는 패턴의 크기, 분포 및 점유 면적이 출력광의 분포에 미치는 영향을 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1495-1498
• /
• 2008

$TiO_2$ nanopowders were synthesized by new sol-gel combustion hybrid method using acetylene black as a fuel. The dried gels exhibited autocatalytic combustion behaviour. $TiO_2$ nanopowders with an anatase structure and a narrow size distribution were obtained at 400-600 ${^{\circ}C}$. Their crystal structures were examined by powder Xray diffraction (XRD) and their morphology and crystal size were investigated by scanning electron microscopy (SEM). The crystal size of the nanopowders was found to be in the range of 15-20 nm. $TiO_2$ powders synthesized at 500 ${^{\circ}C}$ and 600 ${^{\circ}C}$ were applied to a dye solar cell. An efficiency of 5.2% for the conversion of solar energy to electricity ($J_{sc}$ = 11.79 mA/$cm^2$, $V_{oc}$ = 0.73 V, and FF = 0.58) was obtained for an AM 1.5 irradiation (100 mW/$cm^2$) using the $TiO_2$ nanopowder synthesized by the sol-gel combustion hybrid method at 500 ${^{\circ}C}$.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.563-566
• /
• 1998

BaTiO3 분말은 티타늄 수산화물 용액과 비륨수산화물 용액을 혼합하여 적당한 온도와 압력하에서 합성되었다. 미분말이 얻어진 온도는 160~$185^{\circ}C$, 압력은 5~10kg/$\textrm{cm}^2$이였다. 분말의 모양과 크기는 주사전자현미경, 결정 상은 X-선 회절로 분석하였다. 분말합성온도, 반응시간 및 농도변화에 따르는 분말의 물성을 조사하였다. $BaTiO_3$ 분말의 평균입자크기는 반응온도 및 시간이 증가함에 따라 증가하였다. $170^{\circ}C$에서 8시간 반응시킨 경우의 평균입자크기는 약 30nm이고, 입도 분포는 균일하였다.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.439-445
• /
• 2015

We established the emulsion method using membrane filter with precise control of LC droplet distribution in PDLC. PDLC cells with various LC droplet size distributions such as single droplet sizes of $1.0{\mu}m$, $1.9{\mu}m$ and $3.5{\mu}m$, the mixture of two different LC droplet sizes and the mixture of three different LC droplet sizes were fabricated and the electro-optical properties of the emulsion type PDLC cells with various droplet size distribution were investigated. In the appropriate droplet size range, the PDLCs with the single droplet sizes distributions have good electro optical properties than those with the mixture of three different LC droplet sizes. In addition, the PDLC cells with the mixture of two different LC droplet sizes have the better electro optical properties than those with single droplet sizes distribution. The PDLC cell with dual droplet size distribution of $1.0+1.9{\mu}m$ shown the best electro optical properties than the PDLC cells with other size distributions. This method enabled us to find the proper LC droplet size distribution for achieving both high transmittance and contrast ratio.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.472-477
• /
• 2009

Monodisperse spherical $SiO_2$ particles of various sizes ($\sim$350 nm and $\sim$800 nm) and size distributions were synthesized from TEOS and MTMS. The particle size and size distribution were controlled by changing the volume ratio of water to ethanol and the reaction temperature. Narrow-sized $SiO_2$ particles with $\sim$3% size distribution were obtained. Self-assembly of the $SiO_2$ particles for photonic crystals were performed by the solvent evaporation method. The number of ordered $SiO_2$ layers can be controlled by changing the amount of the dispersed $SiO_2$ volume fraction in the solvent.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.728-733
• /
• 2006

The equilibrium or growth shape of ceramic materials is classified largely into two categories according to the thermodynamic conditions imposed. One is a polyhedral shape where the surface free energy is anisotropic, and the other a spherical shape where the surface free energy is isotropic. In the case of grains with a polyhedral shape of anisotropic surface free energy, socalled abnormal grain growth usually takes place due to a significant energy barrier for a growth unit to be attached to the crystal surface. In the case of grains with a spherical shape of isotropic surface free energy, however, normal grain growth with a uniform size distribution takes place. In this contribution, the state-of-the-art of our current understanding of the relationship between the crystal shape and the microstructure evolution during the sintering of ceramic materials in the presence of a liquid phase was discussed.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.575-581
• /
• 2006

To precipitate the complex gel of flux and aluminum hydroxides gel, aqueous solution of the mixture of $Na_2CO_3\;and\;Na_2PO_4{\cdot}12H_2O$ was added with stirring in aqueous solution of the mixture of $Al_2(SO_4)_3{\cdot}14{\sim}18H_2O,\;Na_2SO_4$, and then the complex gel was aged in $0{\sim}30h\;at\;90^{\circ}C$. As aging time passed, the aluminum hydroxides was grown into the acicular AlO(OH) gel. Also, aging time had an effect on physical properties of the AlO(OH) gel and on crystal growth of the flaky ${\alpha}-Al_2O_3$ prepared by molten-salt precipitation. In this study, the complex gel was crystallized in temperature range of $400{\sim}1,200^{\circ}C$ after drying at $110^{\circ}C$, and then it was investigated to effect of aging time on precipitation temperature, size, thickness, morphology and particle size distribution of the flaky ${\alpha}-Al_2O_3$ crystal. As aging time passed, the flaky a${\alpha}-Al_2O_3$ crystal showed a tendency toward an increase in size and thickness as result from an increase in BET surface area and pore volume of the acicular AlO(OH) gel.