• 제목/요약/키워드: Crushed aggregate

검색결과 318건 처리시간 0.025초

폐도자기를 골재로 이용한 콘크리트의 특성 (Properties of Concrete Using Waste Pottery and Porcelain as Aggregates)

  • 강성구;이완조;황인동;박성;정윤중
    • 한국세라믹학회지
    • /
    • 제42권2호
    • /
    • pp.99-103
    • /
    • 2005
  • 현재 국내에서 많은 양의 도자기 폐기물이 발생하고 있으며, 이들 폐기물은 경제적 이득과 환경 보전의 차원에서 재활용하는 방안이 모색되어져야 한다. 따라서, 본 연구에서는 도자기 폐기물을 콘크리트용 골재로 이용하여 폐도자기의 재활용성을 검증하고자 하였다. 폐도자기 재활용 골재(recycled aggregate)의 품질을 부순 골재(crushed aggregate)와 비교 분석하였으며, 부순 골재 단독 콘크리트와 재활용 골재가 비례대로 치환된 콘크리트의 물리적 특성을 비교 분석하였다. 실험 결과 재활용 폐도자기의 비율이 $10\%,\;20\%$, 그리고 $30\%$까지는 압축강도에 작은 영향을 미쳤지만, 재활용 폐도자기의 비율이 $30\%$ 이상 증가할수록 압축강도는 급격히 감소하였으며, 홉수율은 증가하였다. 실험 결과에 따르면, 일정한 압축강도를 지니는 폐도자기 재활용 콘크리트의 제조를 위해서 대체 가능한 재활용 골재의 최대 함량은 $30\%$임을 확인 할 수 있었다.

The Properties of Mortar Mixtures Blended with Natural, Crushed, and Recycled Fine Aggregates for Building Construction Materials

  • Yu, Myoung-Youl;Lee, Jae-Yong;Chung, Chul-Woo
    • 한국건축시공학회지
    • /
    • 제12권1호
    • /
    • pp.73-86
    • /
    • 2012
  • In this research, the possible applicability of mixture blended with natural, crushed, and recycled fine aggregate are discussed. The fresh and hardened properties of mortar using blended fine aggregates are monitored depending on various blending ratio of fine aggregates. Newly developed ternary diagram was also utilized for better interpretation of the data. It was found that air content increased and unit weight decreased as recycled fine aggregate content increased. With moisture type processing of recycled fine aggregate, the mortar flow was not negatively affected by increase in the recycled fine aggregate content. The ternary diagram is found to be an effective graphical presentation tool that can be used for the quality evaluation of mortar using blended fine aggregate.

품질불량 골재가 고강도 콘크리트의 공학적 특성에 미치는 영향 (Effect of Poor Quality Aggregates on the Properties of High Strength Concrete)

  • 이순재;송원루;이홍규;이명호;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.113-114
    • /
    • 2015
  • This paper is to investigate the effect of poor quality aggregate source used in Korea on the mixture proportion and strength development of the high strength concrete fixed at 450 kg/m3 of cement contents. For aggregate kinds, good quality crushed stone from KS certified manufacturer and low quality crushed stone from non certified construction field are used. For fine aggregates, river sand, land sand, sea sand and mixed sand are also used. It is found that the use of low quality aggregates resulted in an increase of water demand considerably due to poor gradation of aggregate and excessive fine particles. Test results indicate that the use of low quality aggregate also decreases the compressive strength compared with that of good quality aggregate.

  • PDF

포졸란 재료를 사용한 재생골재 콘크리트의 건조수축 및 크리프 (Shrinkage and Creep of Recycled Aggregate Concrete Using Pozzolanic Materials)

  • 문대중;임남웅;김양배
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.637-642
    • /
    • 2002
  • In this study, the experiments of recycled aggregate concrete with fly ash and special blended slag powder or diatom calcined at 650$\circ$ were performed on compressive strength, shrinkage and creep. The compressive strength of concrete with recycled aggregate and pozzolanic materials were higher than that of concrete with crushed stone and OPC. On the other hand, the shrinkage and creep of concrete with recycled aggregate and pozzolanic materials was smaller than that of concrete with crushed stone and OPC. Futhermore, the shrinkage and creep of recycled aggregate concrete with fly ash and special blended slag powder was a little decreased that of recycled aggregate concrete with fly ash and diatom. Relationship between compressive strength and creep coefficient was shown to the linear relation like as $\sigma$$_{c}$= -30CF+404.4.

  • PDF

골재종류가 콘크리트의 열팽창계수에 미치는 영향 (Influencing Factor on Thermal Coefficient of Concrete due to Aggregate Types)

  • 김진철;양성철;김남호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.249-254
    • /
    • 2003
  • The thermal coefficient of concrete is measured using dilatometer (AASHTO TP60) and strain gage. Testing parameters such as six different coarse aggregate types, cycles of warming and cooling, specimen shape and measurement types were investigated to evaluate the influencing factors for thermal coefficient of concrete. According to experimental results, the thermal coefficient of concrete made with crushed aggregate showed 9.2 -10.$\mu\varepsilon/^{\circ}C$, , however recycled coarse aggregate classified type II showed a little increasing in comparison with crushed aggregate. The thermal coefficient of concrete made with recycled aggregate was reduced 0.2-0.4$\mu\varepsilon/^{\circ}C$, under temperature cycles. However, specimen shapes were revealed as mainly affecting factors on the thermal coefficient of concrete. Finally the thermal coefficient value determined by the dilatometer device was shown to be similar to the value from PML 60.

  • PDF

바다모래 채취량 감소로 인한 동남권 잔골재 수급안정화 방안에 관한 연구 (A Study on the Stabilization Plan of the Fine Aggregate in the Southeastern Area Due to the Reduction of Sea Sand Collection)

  • 강석표;강혜주;황병일
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 춘계 학술논문 발표대회
    • /
    • pp.326-327
    • /
    • 2018
  • It is expected that the proportion of crushed aggregate will increase in order to fill the decreasing supply of sea sand in the southeast area. However, it is necessary to supply the least amount of sea sand to diversify the aggregate source, in order to minimize the mixing ratio of sea sand and crushed sand to minimize the structural stability of the concrete.

  • PDF

부순모래를 사용한 레디믹스트 콘크리트의 배합설계 및 강도추정방법 (Strength Estimation of Ready-Mixed Concrete Using Crushed Sand)

  • 서진국
    • 한국산업융합학회 논문집
    • /
    • 제2권1호
    • /
    • pp.45-52
    • /
    • 1999
  • It is difficult to keep the balance of supply and demand for natural aggregates in recent years, because natural resources have become to be almost exhausted. Crushed stone is already used for coarse aggregate instead of river gravel at present. Now, crushed sand or sea sand should be used for fine aggregate, because natural sand also has been exhausted with a few exceptions around Nakdong River. The sea sand has a lot of problems which are the corrosion of reinforcement bars, the investment of facility for cleansing salt and the cost increase due to the insufficiency of industrial water. Therefore, it is necessary to produce and to utilize the crushed sand very actively, but some material properties which are related to water absorption, strength and chemical durability, prevent from determining the generalized criteria because its rocks make much differences in its physical and chemical characteristics. In this paper, fundamental physical properties of crushed sand, which comes from Daegu Subway construction fields, have been investigated for the usability on basic material of concrete. The optimum replacement ratio and the strength estimation method of crushed sand replacing natural sand also have been presented here through the compressive strength test of ready-mixed concrete cylinders.

  • PDF

부순모래를 사용한 콘크리트의 현장 품질 특성에 관한 실험 연구 (Investigation on Properties of Concrete with Crushed Sand on Site)

  • 이성복;이도헌;지남용
    • 한국건축시공학회지
    • /
    • 제3권3호
    • /
    • pp.107-112
    • /
    • 2003
  • This study is to investigate the properties of concrete with crushed sand on site and to propose a quality guideline for its use as artificial sand and concrete. From our experimental result in laboratory and site, we found that demand water of concrete with crushed sand for target slump increased by 18kg/m3 compared to mixed sand and l8kg/m3 compared to sea sand respectively. The compressive strength increased by around 3∼6% when compared to concrete with sea sand. Accordingly, our study showed that the combined sand mixed with sea sand would be desirable to obtain workability and strength of concrete including dry shrinkage and bleeding test. Furthermore, the optimal replacement percentage of crushed sand was 50% with sea sand. As such, crushed sand would be sufficient as fine aggregate for concrete in terms of economic efficiency and quality. Crushed sand, on the other hand can only be used as fine aggregate when VFS(Very Fine Sand) is below 3.5 percentage of weight of sand and particle shape is above 55 percentage. Also, the particle shape and microsand passing NO.200 sieve should continually be improved to increase workability of concrete on site.

산지별 세척사 특성 (The Properties of Sea Sand with Digging Sources)

  • 김정빈
    • 한국건설순환자원학회논문집
    • /
    • 제2권2호
    • /
    • pp.76-82
    • /
    • 2006
  • High-strength, High-durability concrete appearance was embossed by benevolence who quality for each raw material that become factor that is direct in concrete manufacture and the special quality is very important and request properties of matter were also strengthened more. Specially, natural resources of good quality were abundant past in occasion of aggregate and unlike concrete request strength past that the importance was less relatively the quality enemy than cement because is also not big, importance of aggregate quality great veried as concrete strength and request properties of matter about durability are strengthened more on extreme displacement. Mixing four who is original and mixs special quality examination of domestic three Four-Stick Games by Chaechwiwon and age Four-Stick Games and crushed sand examined concrete quality characteristic that use mortar and concrete quality characteristic, special quality of North Korea sun guardian mountain three Four-Stick Games that is imported from the North Korea, North Korea sun guardian mountain three Four-Stick Games etc..

  • PDF

콘크리트 슬러지를 이용한 인공골재 의 품질특성 (The Quality Characteristics of Artificial Aggregate using Concrete Sludge)

  • 고대형;이정재;문경주;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.269-274
    • /
    • 2001
  • The purpose of this study is to evaluate basic properties of artificial aggregate using concrete sludge according to mixing ratio. Cement, waste phosphogypsum and Powder of blast furnace slag are used with binder of artificial aggregate. Specific gravity, absorption are tested for basic property, and impacting, abrasion and crushing tests are done for characteristics of strength on the aggregate, including comparison with crushed stone. Bry specific gravity was ranged about 1.16 to 1.30 the test result of the aggregates and shape is round In the result of tests, it is concluded that qualities of the aggregates using concrete sludge are slightly lower than crushed stone but it is similiar with sintering artificial lightweight aggregate in high temperature.

  • PDF