• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.310-317
• /
• 2015

Purpose: The purpose of this study was to evaluate the validity of reference points for edentulous patient by examining the correlation of teeth and face, and intraoral anatomic landmarks. Materials and methods: We examined a facial outline, length, bizygomatic width, nasion - gnathion length, glabella - nasion distance in 270 men and 280 women satisfied with inclusion criteria from Seoul National School of Dentistry. The shape of maxillary central incisor, mesiodistal crown width and length of maxillary 6 incisors, distance from incisive papilla to labial surface of maxillary central incisor, and perpendicular distance from incisive papilla to intercanine line were measured in the stone model. We analyzed the ratio and relevant relation statistically. Results: The probability on having the same shape of face and the relative same shape maxillary incisor was 55.56% and 46.43% for men and women. The facial length proved to be a more valuable measurement in women in the tooth selection. The ratio of bizygomatic width to mesiodistal width of maxillary central incisor, and the ratio of bizygomatic width to width of maxillary 6 incisors were 16.8 : 1 and 3.0 : 1 and were positively correlated with each other. The distance of the canines from the maxillary incisal papilla was $1.33{\pm}1.28mm$. The distance between the center of the incisal papilla and the labial surface of their maxillary central incisor was $9.23{\pm}1.20mm$. Conclusion: It was showed that anatomical reference points in tooth selection and arrangement for edentulous patient are useful and have validity in our limited study.

• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.26-30
• /
• 2013

Objectives: The aim of this study was to investigate the relationship between the apical foramen morphology and the length of merged canal at the apex in type II root canal system. Materials and Methods: This study included intact extracted maxillary and mandibular human premolars (n = 20) with fully formed roots without any visible signs of external resorption. The root segments were obtained by removing the crown 1 mm beneath the cementum-enamel junction (CEJ) using a rotary diamond disk. The distance between the file tip and merged point of joining two canals was defined as Lj. The roots were carefully sectioned at 1 mm from the apex by a slow-speed water-cooled diamond saw. All cross sections were examined under the microscope at ${\times}50$ magnification and photographed to estimate the shape of the apical foramen. The longest and the shortest diameter of apical foramen was measured using ImageJ program (1.44p, National Institutes of Health). Correlation coefficient was calculated to identify the link between Lj and the apical foramen shape by Pearson's correlation. Results: The average value of Lj was 3.74 mm. The average of proportion (P), estimated by dividing the longest diameter into the shortest diameter of the apical foramen, was 3.64. This study showed a significant negative correlation between P and Lj (p < 0.05). Conclusions: As Lj gets longer, the apical foramen becomes more ovally shaped. Likewise, as it gets shorter, the apical foramen becomes more flat shaped.

• Journal of Veterinary Clinics
• /
• v.21 no.2
• /
• pp.143-148
• /
• 2004

Serial ultrasonographic examination was daily performed on 12 pregnant Shih-tzu bitches from day 15 until parturition to determine the size of gestational structures. Gestational age was timed from the day of ovulation (day 0), which was estimated to occur when plasma progesterone concentration was first increased above 4.0 ng/ml. Extra-fetal structures were measurable from days 17 to 46. Outer uterine diameter increased from $9.9{\pm}0.4$ mm (Mean${\pm}$SD) at day 20 to $44.3{\pm}0.8$ mm at day 46 and inner chorionic cavity diameter increased from $7.2{\pm}0.2$ mm at day 17 to $36.9{\pm}1.5$mm at day 41. Length of chorionic cavity or zonary placenta increased from $6.6{\pm}0.4$ mm at day 21 to $46.4{\pm}0.9$ mm at day 44. Of the extra-fetal structures, inner chorionic cavity diameter was the most accurate for estimation of gestational age until day 38. Fetal structures were measurable from days 23 to 60. Crown-rump length increased from $3.9{\pm}0.3$ mm at day 23 to $55.2{\pm}3.3$ mm at day 41, fetal body diameter increased from $7.9{\pm}0.6$ mm at day 32 to $47.8{\pm}2$ mm at day 60, and fetal head diameter increased from $6.3{\pm}1.1$ mm at day 29 to $25.6{\pm}0.2$ mm at day 60. Of the fetal structures, fetal head diameter was the most accurate for estimation of gestational age from day 38 until day 60.

• Journal of Environmental Science International
• /
• v.24 no.1
• /
• pp.55-64
• /
• 2015

The dry weight of mother plants' leaves had the highest increase rate in both NS (single-use) and NS+EM (mixed-use) mixed with NS 0.8 (customary use). In seafood amino acid fertilizer (SAF) application, the increase rate was highest in SAF solution at a 300-fold dilution. Mother plants' crown diameter, plant height, leaf length, leaf width, petiole length and leaf number showed the greatest growth amount when NS 0.8 (customary use) was mixed to NS (single-use) or NS+EM (mixed-use) solution. The growth was highest in SAF solution diluted 300 folds, but lowest in SAF solution diluted 100 folds. Of all inorganic nutrients, excluding sulfur, total amount of nitrogen, available phosphorus, potassium, calcium and magnesium had the highest increase rate in both NS (single-use) and NS+EM (mixed-use) with the treatment of NS 0.8 (customary use). Total nitrogen, in particular, was increased by 3.1% in NS 0.4, 6.0% in NS 0.8, and 4.5% in NS 0.8 with the application of NS+EM at a 500-fold dilution compared to NS alone. Total nitrogen amount showed the highest increase rate in SAF solution diluted 300 folds. Total nitrogen, available phosphorus, calcium, magnesium and EC in soils applied with culture solutions (NS, NS+EM) had increasing tendencies after fertilizer application. The results were comparable to those of SAF treatment. The increase rate of each inorganic nutrient composition declined in soils applied with NS+EM solution diluted 500 folds compared to NS alone.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.341-347
• /
• 1999

Pregnant Yorkshire gilts were utilized to investigate the efficacy of exogenous administration of pST and/or insulin in enhancing prenatal piglet survival, uteroplacental and umbilical cord growth and development. Gilts were randomly assigned in a $2{\times}2$ factorial arrangement to four treatment combinations consisting of either daily i.m. injections of 5 mg pST (P, n=23); 0.50 IU/kg of insulin (I, n=23); combination of pST and insulin (P+I, n=23); or 1 ml of saline as control (C, n=23) from gestation Day 30 to 70. All gilts were sacrificed on gestation d 113 to evaluate piglet survival and uteroplacental or umbilical cord development Uteri were longer (346.3 vs 325.7 cm; p<0.05), and heavier (3122.8 vs 2940.7 g; p<0.05) in insulin treated gilts. Only placental macroscopic surface area was enhanced by maternal insulin injections (p<0.05) Incidence of umbilical cord abnormalities were low (14.3%), and they were independent of maternal treatment, occurring more in short cords than in long ones (21 vs 12%; p<0.05). A 6% increase in cord length (53.2 vs 48.6 cm; p=<0.05) was observed in piglets from treated gilts compared with controls. Significant sex differences (in favour of males) were observed in piglet weight, crown rump length and for most umbilical or placental parameters. Gilt weight gains from breeding to Day 113 of gestation were 10% and 15% greater in pST and insulin treated gilts compared with controls. These data indicate that prepartum injections of pST and/or insulin to gestating gilts seem to have a beneficial effect on uteroplacental or umbilical cord development and promote conditions conducive for perinatal piglet survival.

• The korean journal of orthodontics
• /
• v.43 no.5
• /
• pp.225-234
• /
• 2013

Objective: The purpose of this study was to classify Korean young adults into 3 groups on the basis of upper incisor exposure rates (UIERs) and to compare the skeletal, dental, and soft tissue variables. Methods: Samples were obtained from 127 students at the College of Dentistry, Wonkwang University in South Korea. Facial photographs of frontal posed smiles and lateral cephalograms of the subjects were taken. The subjects were divided into 3 groups on the basis of UIERs and 20 measurements were compared among the 3 groups. The correlations between the variables were determined. Results: Male and female subjects showed significant differences in the group distribution. Male subjects showed higher frequencies of low smiles, and female subjects showed higher frequencies of high smiles. The vertical height of the anterior alveolar process of the maxilla directly correlated with the UIER. However, the UIER showed no significant correlation with the vertical height of the anterior basal bone or the inclination of the upper incisor axis. In female subjects, the upper central incisor clinical crown length showed an inverse correlation with the UIER. However, this variable showed no significant correlation with the UIER in male subjects. Conclusions: The UIER was directly correlated with the levator muscle activity of the upper lip and inversely correlated with the upper lip thickness, yet there was no correlation between the UIER and upper lip length at rest.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.242-252
• /
• 1998

The inhabitation environments and growth conditions of Machilus thunbergii community in the Pyonsanbando located at southwestern area in Korea were examined and analyzed to provide some practical data to be used to establish measures for long term succession monitoring, protection and sustainable management. The Machilus thunbergii community are located at Kyokpo-ri, Pyonsan-myon, Puan-gun(35$^{\circ}$35′24"N~35$^{\circ}$ 42′30"N, 126$^{\circ}$28′18"E~126$^{\circ}$40′40"E). Within the Pyonsanbando area the mean temperature is 12.4$^{\circ}C$, the warmth index 101.5$^{\circ}C$.month, the coldness index -12.3$^{\circ}C$ month and the annual precipitation 1,016mm. The soil within the community is silt loam or clay loam and so fertile. 30 species and 1 varieties of 21 families inhabited at the community. There were 18 grown trees and 131 saplings of Machilus thunbergii within the community. The mean basal diameter, mean height, and crown width of grown trees was measured to be 57.4cm, 7.4m and 9.0~9.8m respectively. And 9 trees were full flowering, 2 trees small flowering here and there, and 7 trees non flowering in 1998. The mean branch growth length was 8.3cm, mean leaf area 18.3$\textrm{cm}^2$, mean inflorecence length 9.3cm, mean fertilization 14.5％ and mean seed diameter 7.6mm. Further rich management measure and investigation were recommended such as sapling protection, signboard construction, soil erosion controlling and regular monitoring within the community.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.192-204
• /
• 2011

In this study, 3-D analyses were conducted while taking every construction stage into account. Then 2-D analyses were conducted which yield the same results with the 3-D results. The crown settlement normalized by the ultimate value was compared during the process to overcome the discrepancy caused by different dimensions. When a bench or a core is left uncut to give extra support to the face and eventually the whole excavation boundary, this extra supporting effect also has to be included in the analysis. In this study, this effect is also implemented in terms of the load distribution factor. When the length of the bench is very short compared to the diameter of the tunnel in such cases as in short bench cut or in mini-bench cut, the supporting effect of the face does not disappear even after the bench is completely excavated and supported since the face is still too close to the point of interest. The 4th load distribution factor was defined to stand for the advance of the face after the completion of the excavation cycle. The 4th load distribution factor turned out to be very useful in determining the load distribution factors when a tunnel is excavated by bench cut with various bench lengths under different initial conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1227-1234
• /
• 2012

In this study, fatigue tests were carried out using real-scale pipe bend specimens with wall-thinning defects under a cyclic bending load together with a constant internal pressure of 10 MPa. The wall-thinning defect was located at the extrados and the intrados of the pipe bend specimens. A fully reversed cyclic in-plane bending displacement was applied to the specimens. For the pipe bends with wall thinning at the extrados, an axial crack occurred at the crown of the pipe bend rather than at the extrados where the defect was located. In addition, the fatigue life was longer than that of a sound pipe bend predicted from the design fatigue curve in ASME Sec.III, and it was less dependent on the axial length of the wall-thinning defect. For the pipe bends with wall thinning at the intrados, a circumferential crack occurred at the intrados. In this case, the fatigue life was much shorter than that of a sound pipe bend predicted from the design fatigue curve, and it clearly decreased with decreasing axial length of the wall-thinning defect.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.26-32
• /
• 2020

Objective: The Heat Induction Typodont System (HITS), used in some recent studies, has a distinct advantage over previous tooth movement simulation methods. This study aimed to compare inclination and vertical changes between the single-wire and double-wire techniques during en masse retraction with different lengths of lever arms in lingual orthodontics using an upgraded version of the HITS. Methods: Duet lingual brackets, which have two main slots, were used in this study. Forty samples were divided into four groups according to the length of the lever arm (3-mm or 6-mm hook) and the retraction wire (single-wire or double-wire). Four millimeters of en masse retraction was performed using lingual appliances. Thereafter, 3-dimensional-scanned images of the typodont were analyzed to measure inclination and vertical changes of the anterior teeth. Results: Incisor inclination presented more changes in the single-wire groups than in the double-wire groups. However, canine inclination did not differ between these groups. Regarding vertical changes, only the lateral incisors in the single-wire groups presented significantly larger values than did those in the double-wire groups. Combining the effect of hook lengths, among the four groups, the single-wire group with the 3-mm hook had the highest value, while the double-wire group with the 6-mm hook showed the least decrease in crown inclination and extrusion. Conclusions: The double-wire technique with an extended lever arm provided advantages over the single-wire technique with the same lever arm length in preventing torque loss and extrusion of the anterior teeth during en masse retraction in lingual orthodontics.