• 대한치과교정학회지
• /
• 제26권6호
• /
• pp.657-666
• /
• 1996

Orthopantomogram is commonly used to evaluate root parallelism. "Good parallelism" between roots is widely accepted as one of the guidelines of a successful orthodontic treatment. In case there was a large angle between crown axis and root axis, and if we valued only the position of crown in establishing occlusal relationship without considering of the situation of root, the problem of root arrangement between adjacent teeth would be occurred. The estimate of root parallelism in mesiodistal direction before and after orthodontic treatment must be emphasized. The intent of this study was to determine the clinical importance and correlation of the angle between crown axis and root axis. Orthopantomograms of 105 orthodontic patients being treated in Yonsei university were used in this study. Twenty-eight teeth in both maxilla and mandible were selected and analyzed quantitively to evaluate the angle between crown axis and root axis, and obtain the correlationship among the individual teeth. The results are as follows: 1. Among the teeth presenting normal distribution, the maxillary right canine showed the largest mean value( $5.73{\pm}4.42^{\circ}$), which was composed of the crown-root angles, and the mandibular left lateral incisor showed the smallest mean value( $0.60{\pm}3.76^{\circ}$). 2. The crown-root angles of the maxillary incisors and the first molars, and the mandibular central incisors and the first molars didn't show normal distribution and the ranges of these angles were dispersed. 3. Significant differences were present between the crown axis and the root axis except for lower first premolars. (p<0.05) 4. No significant difference was present for the crown-root angle between right and left side, (p<0.05) 5. No significant difference was present for the crown-root angle between male and female except for lower left first premolar. (p<0.05) 6. In the upper right quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, lateral incisor and canine. In the upper left quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor. In the lower right quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, first molar and second molar. In the lower left quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, lateral incisor and canine, first molar and second molar. (p<0.05)

• 대한치과보철학회지
• /
• 제49권2호
• /
• pp.152-160
• /
• 2011

연구 목적: 상악 중절치에 여러 가지 수복물 설계와 변연부 위치를 설정하여 치아 삭제를 하였을 때 나타나는 치아 삭제량의 변화를 평가하기 위함이다. 연구 재료 및 방법: 36개의 상악 중절치 레진 인공치가 실험에 사용되었다. 수복물의 디자인에 따라 이들은 4개의 군으로 나뉘었다. 그리고 각각의 군은 다시 변연부의 위치에 따라 3개의 세부 군으로 나뉘었다. 삭제되지 않은 치아의 부피가 미세단층촬영을 이용해 측정되었고 같은 방법으로 삭제 후의 치아의 부피가 측정되었다. 이 측정된 영상들을 서로 겹쳐서 비교함으로 삭제 전과 후의 부피 변화를 알아보았다. 결과: 수복물 설계에 따른 삭제 전과 후의 부피 변화량은 다음과 같은 순서로 변화량의 차이를 보였다: traditional laminate veneer < full laminate veneer < all ceramic crown < metal ceramic crown. One-Way ANOVA와 다중비교 Tukey로 유의수준5%에서 통계 분석한 결과 각각의 군에서는 다음과 같은 순서로 변화량의 차이를 보였다: CEJ 1 mm 상방 < CEJ < CEJ 1 mm 하방 (P<.05). 부피 변화를 백분율로 나타낸 수치를 보면 all ceramic crown과 metal ceramic crown 에서는 31 - 48% 로 나타났고 laminate veneer에서는 14 - 30%로나타났다. Laminate veneer에서 나타난 부피 변화량은 metal ceramic crown의 1/3로 나타났다. The full laminate (CEJ 1 mm 하방)와 all ceramic crown (CEJ 1 mm 상방)는 유사한 부피 변화를 보였다. Metal ceramic crown은 all ceramic crown과 비교하였을 때 13.7% 더 많은 부피 변화를 보였다. 결론: 수복물의 설계와 변연부 위치의 변화에 따라 부피 변화의 차이가 존재한다.

• 대한치과기공학회지
• /
• 제40권2호
• /
• pp.73-82
• /
• 2018

Purpose: The purpose of this study was to investigate the production environment of crown prosthesis for National Health Insurance(NHI) benefit. Methods: This study carried out self-administered questionnaire survey from September 1, 2016 to October 31 by having research subjects as 261 dental technician. Except 100 copies with incomplete response, 161 copies were used as the materials of final analysis. Results: Unlike gold crowns, the material cost of metal crowns was paid at the dental laboratory(86.3%). Total material consumption for making metal crown was more than gold crown(63.4%), especially for the finishing and polishing processes(78.3%). The subjects responded that a routine dental laboratory fee of crown prosthesis is unreasonable, and it is necessary to adjust and improve it(metal crown 96.2%, gold crown 96.9%). NHI coverage dental prosthesis was not marked on the order form(46.0%), and the dental laboratory fee of that was nor received(64.0%). Conclusion : It is necessary to estimate the NHI cost level of the crown prosthesis by reflecting the production environment and engineering process in dental laboratories. In addition, institutional arrangement should be backed up so that dental laboratories can receive appropriate dental laboratory fee.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.157-164
• /
• 2006

Purpose: The purpose of this study was to compare the fracture strength of the zirconia monolithic all-ceramic crowns according to the thickness(0.5 mm, 0.8 mm, 1.1 mm) and IPS Empress II ceramic crown of 1.5 mm thickness. Material and method: Eight crowns for each of 3 zirconia crown groups were fabricated using CAD/CAM system(Kavo, Germany) and eight Empress II crowns were made from silicone mold and wax pattern. Each crown group was finished in accordance with the specific manufacturer s instruction. All crowns were luted to the metal dies using resin cement and mounted on the testing jig in a universal testing machine. The load was directed at the center of crown with perpendicular to the long axis of each specimen until catastrophic failure occurred. Analysis of variance and Tukey multiple comparison test(p<.05) were applied to the data. Results and Conclusion: 1. The fracture strength of the zirconia monolithic all-ceramic crown was higher thickness increased(p<.05). 2 The fracture strength of 1.1 mm thickness zirconia monolithic all-ceramic crown was higher than the fracture strength of 1.5 mm thickness IPS Empress II crown(p<.05). 3. The fracture strength of 0.5 mm thickness zirconia monolithic all-ceramic crown exceeded maximum occlusal forces.

• 원예과학기술지
• /
• 제32권1호
• /
• pp.41-45
• /
• 2014

본 실험은 고랭지에서 신품종 사계성 딸기 '고하' 품종의 생육 및 수량에 영향을 미치는 관부수를 구명하고자 실시하였다. 정식은 4월 29일에 재식거리를 $55{\times}30cm$로 실시하였으며, 시험구 처리는 관부수를 1, 3, 5개로 하고 대조구로 방임을 두었다. 생육초기에 관부수가 적을수록 잎은 커졌고, 화방경은 굵어졌다. 최종수확 시 초장은 크라운수가 많을수록 길어졌다. 생체중은 관부수 방임구가 118g으로 관부수 1개구의 40.8g보다 77.2g이 더 무거웠다. 발생된 화방수는 관부수 5개구와 방임구가 20.1개로 관부수 1개구의 6.8개에 비해 13.3개가 더 많았다. 그러나 관부수에 따른 과실품질의 유의적인 차이는 보이지 않았다. 관부수가 많을수록 평균과중은 가벼웠으며, 상품과율은 감소하였다. 상품수량은 관부수 방임구가 $17,372kg{\cdot}ha^{-1}$로 가장 많았으며, 관부수 1개구에 비해 68% 증수되었다. 따라서 고랭지 사계성 딸기 '고하'의 여름재배 시 안정생산을 위해서는 관부는 방임하며, 화방굵기가 3mm 이하인 화방은 제거하는 것이 가장 적당하였다.

• 대한화학회지
• /
• 제32권5호
• /
• pp.443-451
• /
• 1988

Monobenzo-15-crown-5와 Dibenzo-18-crown-6을 모체로 아조(-N=N-)기가 치환된 두가지 새로운 crown ether dye-Ⅰ과 dye-Ⅱ를 합성하여 스펙트럼을 조사한바 ${\lambda}_{max}$는 377nm 와 383nm에서 나타났고. 이 crown ether dye 화합물과 알칼리 금속(Na, K, Cs)과의 착물 스펙트럼에서 ${\lambda}_{max}$는 390~400nm의 띠 이동과 세기가 증가함을 보였다. 또한 추출상수값(Kex)은 음이온을 고정한 뒤 추출상수의 크기는 Crown ether dye-Ⅰ에서는$K^+$ < $Cs^+$ < $Na^+$의 순위를 얻었으며 crown ether dye-Ⅱ에서는 $Cs^+$ < $Na^+$ < $K^+$의 순서를 얻었다. 이러한 결과는 알칼리 금속의 이온반지름과 crown ether dye의 동공의 크기 관계와 알칼리 금속 이온의 전하밀도로 설명될 수 있고 도한 음이온의 변화에 따른 추출 상수의 크기는 두가지 crown ether dye에서 똑같이 $Cl^-$ < $Br^-$ < $I^-$ < picrate의 순위를 얻었다. 이는 음이온의 용매화효과 순서와 일치함을 보여주고 있다. 그리고 각각 합성된 crown ether dye화합물의 추출계수 비를 구하여 비교 고찰하였고, 알칼리 금속 이온들의 회수율은 약 90%의 양호한 실험값을 얻었다.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.165-173
• /
• 2006

Purpose: With gold electroforming system fir the double crown, the secondary crown is electroformed directly onto the primary crown. An even thick layer of high precision can be acquired. It is thought that the retention of electroformed outer crown is primarily acquired by the adhesive force (surface tension) through the saliva which is interposed between precisely fitted inner and outer crown. The purpose of this study was to investigate the effect of taper and surface area of inner crown on the retentive force of electroformed outer crown according to the presence of saliva. Materials and methods: 32 titanium inner crowns with cervical diameter of 8 mm and cone angles of 0, 2, 4, 6 degrees, which had same surface area by regulated height, were machined on a lathe. Another 32 titanium inner crowns with cone angles of 0, 2, 4, 6 degrees, which had doubled surface area by increased cervical diameter. were fabricated. Eight specimens of each group, for a total of 64 titanium inner crowns, were prepared. The electroformed outer crowns were fabricated directly on the inner crowns by using electroforming machine(GAMMAT free, Gramm Technik, Germany). The tertiary frameworks were waxed-up on the electroformed outer crown and cast using nonprecious alloy($Rexillium^(R)III,\;Jeneric^(R)/Pentronh^(R)$ Inc., USA). The cast metal frameworks were sandblasted with alubimium oxides and cemented using resin cement(Superbond C&B, Sun Medical Co., Japan) over the electroformed copings of each specimen. Then, artificial saliva($Taliva^(R)$, Halim Pharm. Co., Korea) was sprayed between the inner and outer crown, and they were connected under 5 kg force. The retentive force was measured by the universal testing machine(Tinius Olsen 1000, Tinius Olsen, USA) with a cross-head speed of 66.67 mm/sec. The direction of cross-head travel was exactly aligned with the path of removal of the respective specimens. This measurement procedures for retentive force of electroformed outer crown with artificial saliva were repeated in the same way without presence of artificial saliva. Results and Conclusion: The following conclusions were drawn: 1. The retentive force of electroformed outer crown was decreased according to increased taper of inner crown(P<.05). 2. The retentive force of electroformed outer crown showed no significant differences according to surface area and the presence of artificial saliva(P>.05).

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.199-215
• /
• 1990

This study was to analyze the stress distribution of implant and supporting tissue in $Br{\aa}nemark$ osseointegration implant. The analysis has been conducted by using the axisymmetric finite element method and type of model according to crown material. Tests have been performed at 1 kg load on central fossa of crown portion. Each type of model was designed differently according to crown material. 1) Porcelain fused to metal crown(Model A) 2) Composite resin veneered crown(Model B) 3) Acrylic resin veneered crown(Model C) 4) Type III gold crown(Model D) The displacements and stresses of implant and supporting structures were analyzed to investigate the influence of the type of crown material. The results were obtained as follows : 1. Displacement of implant was shown uniformly downward displacement in all models and abutments were observed distally downward displacement. 2. In supporting tissues, stress was concentrated on the crest of compact bone and the spongy bone below implant. 3. The PFM and the type III gold crown showed the largest concentration of stress at the crest of compact bone and the spongy bone below implant, respectively. Acrylic resin artificial teeth and composite resin veneered crown indicated almost the same distribution of stress. 4. The gold screw, the abutment screw and the top of abutment showed the concentration of stress in implants of every model.

• 한국산림과학회지
• /
• 제99권1호
• /
• pp.52-56
• /
• 2010

본 연구에서는 우리나라에서 수관화에 취약하다고 밝혀진 소나무림을 대상으로 수관층의 연료특성을 잎과 가지 굵기 별로 구분하여 수분함량, 연료밀도로 제시하고자 하였다. 이를 위해 대구 팔공산에서 소나무 10그루를 벌채하여 각 부위별로 건중량을 측정하였다. 분석결과 수관층 살아 있는 부위의 평균 수분함량은 53%, 죽은 부위는 15.3%였으며, 생엽의 수분함수율은 평균 56%이었다. 수관화 확산시 실제적으로 연소되는 잎과 직경 1 cm 이하의 가지를 합한 연료량은 전체 바이오매스에서는 16.2%, 수관층 바이오매스에서는 55%를 차지하였다. 수관 연료밀도는 평균 0.24 kg/$m^3$이었으며, 잎과 1 cm 굵기 이하의 가지를 합한 유효 수관연료밀도는 0.1325 kg/$m^3$이었다.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.252-256
• /
• 2017

PURPOSE. This in vitro study aimed to analyze and compare the reproducibility of zirconia and lithium disilicate crowns manufactured by digital workflow. MATERIALS AND METHODS. A typodont model with a prepped upper first molar was set in a phantom head, and a digital impression was obtained with a video intraoral scanner (CEREC Omnicam; Sirona GmbH), from which a single crown was designed and manufactured with CAD/CAM into a zirconia crown and lithium disilicate crown (n=12). Reproducibility of each crown was quantitatively retrieved by superimposing the digitized data of the crown in 3D inspection software, and differences were graphically mapped in color. Areas with large differences were analyzed with digital microscopy. Mean quadratic deviations (RMS) quantitatively obtained from each ceramic group were statistically analyzed with Student's t-test (${\alpha}=.05$). RESULTS. The RMS value of lithium disilicate crown was $29.2\;(4.1){\mu}m$ and $17.6\;(5.5){\mu}m$ on the outer and inner surfaces, respectively, whereas these values were $18.6\;(2.0){\mu}m$ and $20.6\;(5.1){\mu}m$ for the zirconia crown. Reproducibility of zirconia and lithium disilicate crowns had a statistically significant difference only on the outer surface (P<.001). The outer surface of lithium disilicate crown showed over-contouring on the buccal surface and under-contouring on the inner occlusal surface. The outer surface of zirconia crown showed both over- and under-contouring on the buccal surface, and the inner surface showed under-contouring in the marginal areas. CONCLUSION. Restoration manufacturing by digital workflow will enhance the reproducibility of zirconia single crowns more than that of lithium disilicate single crowns.