• 한국주거학회논문집
• /
• 제6권2호
• /
• pp.181-189
• /
• 1995

It is thought as more important for us to understand foreign countrie's culture in the modern society. because the world is becoming closer day by day thiough the develepment of communication and mass-media. Cross-cultural study could play a role to give an opportunity for people to understand foreign countrie’s culture easily.In this respect, this study was planned to find out similarity and difference between Danish and Korean folk tables made and used before the 20th century during the 18th-l9th century as a part of the comparative study of folk furniture between the two countries. It would be very interesting if we could find something valuable between Danish and Korean folk furniture. because they are located very far away each other geographically with less cultural communication before.There were more differences than similarity between the folk tables of the two countries and major findings were as followings : Firstly, there were many kinds of space-saving tables in Denmark. whereas only a few kinds of tables which could be removed easily after their usage were found in KoreaSecondly, Banish folk tables were more emphasized on the function rather than decoration. Whereas Korean folk tables were smaller lower and more decorative than Danish ones to fit their life-style of sitting on the floor.Thirdly, many Danish folk tables were made of bare wood. while Korean ones were finished by transparent lacquer or vegetable oil. Stone tops if tables were rare in both countries. Lastly. there were common factors in the design of legs of folk tables in both countries. It was interesting that animal legs such as deg tiger cat. lion, and eagle were used for design motif of the table legs. But trestle leg, cross leg and gate leg were not found in Korean folk tables. As a conclusion, throughout this study, it became obvious that life-style was one of the most important factor influencing on the design of furniture.

• Nuclear Engineering and Technology
• /
• 제35권6호
• /
• pp.581-595
• /
• 2003

Transport lattice codes require the resonance integral tables for the resonant nuclides where the resonance integral is a function of the background cross section and can be prepared through a special program solving the slowing down equation. In case the cross section libraries do not include the resonance integral table for the resonant nuclides, the computational prediction produces a large error. We devised a new method using a Monte Carlo calculation for the effective resonance cross sections to solve this problem provisionally. We extended this method to obtain the resonance integral table for general purpose. The MCNP code is used for the effective resonance integrals and the LIBERTE code for the effective background cross sections. We modified the HELIOS library with the effective cross sections and the resonance integral tables obtained by the newly developed Monte Carlo method, and performed sample calculations using HELIOS and LIBERTE. The results showed that this method is very effective for the resonance treatment.

• Smart Structures and Systems
• /
• 제9권2호
• /
• pp.165-188
• /
• 2012

In the first part of the paper, the optimal design parameters for tuned liquid column dampers (TLCD) in harmonic pitching motion were investigated. The configurations in design tables include uniform and non-uniform TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 for the design in different situations. A closed-form solution of the structural response was used for performing numerical optimization. The results from optimization indicate that the optimal structural response always occurs when the two resonant peaks along the frequency axis are equal. The optimal frequency tuning ratio, optimal head loss coefficient, the corresponding response and other useful quantities are constructed in design tables as a guideline for practitioners. As the value of the head loss coefficient is only available through experiments, in the second part of the paper, the prediction of head loss coefficients in the form of a design chart are proposed based on a series of large scale tests in pitching base motions, aiming to ease the predicament of lacking the information of head loss for those who wishes to make designs without going through experimentation. A large extent of TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 and orifice blocking ratios ranging from 0%, 20%, 40%, 60% to 80% were inspected by means of a closed-form solution under harmonic base motion for identification. For the convenience of practical use, the corresponding empirical formulas for predicting head loss coefficients of TLCDs in relation to the cross-sectional ratio and the orifice blocking ratio were also proposed. For supplemental information to horizontal base motion, the relation of head loss values versus blocking ratios and the corresponding empirical formulas were also presented in the end.

• Communications for Statistical Applications and Methods
• /
• 제11권1호
• /
• pp.169-179
• /
• 2004

Partially balanced diallel cross designs with m-associate classes are defined and two general methods of construction are presented. Two-associate class designs based upon group divisible, triangular, and extended group divisible association schemes obtained using the general methods are also given. Tables of designs for p$\leq$24 are also provided.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.571-578
• /
• 2006

Research using multiple shake tables present new and unique challenges in controls. Typical single shake table tests with large specimens must cope with significant specimen force feedback that can increase tracking error due to specimen gain, damping, and non-linearity. Multiple shaking tables with distributed specimens can produce cross-coupling forces due to inertial and response effects and forces due to static differential displacements. Although many various control architectures exist, basic simplified techniques can yield excellent results without risk to control stability. Off-line simulation techniques can also prove invaluable for studying system response before the real system is operated.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.119-138
• /
• 1998

The case of proportional cell frequencies for the two-way cross-classification with interaction is considered. Several types of hypotheses for the general unbalanced data that are commonly used in the literature are shown, and they are written out for this particular case. A reparameterized form of the cell means model is defined to establish the reparameterized model, and orthogonal property of the model is shown using the augmented matrix and the numerator sums of squares are computed. Different ways of producing the same analysis of variance tables are shown in both orthogonal and nonorthogonal situations.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.570-579
• /
• 2011

This paper deals with free vibrations of the circular curved beams with constant volume, whose cross sectional shapes are the circular solid cross-sections. Volumes of the objective beam are always held in constant regardless shape functions of the cross-sectional radius. The shape functions are chosen as the linear, parabolic and sinusoidal ones. Ordinary differential equations governing free vibrations of such beam are derived and solved numerically for determining the natural frequencies. In numerical examples, the hinged-hinged, hinged-clamped and clamped-clamped end constraints are considered. As the numerical results, relationships between frequency parameters and various beam parameters such as rise ratio, section ratio, elasticity ratio, volume ratio, slenderness ratio and taper type are reported in tables and figures.

• 한국소음진동공학회논문집
• /
• 제20권2호
• /
• pp.144-152
• /
• 2010

This paper deals with free vibrations of the tapered circular arches with constant volume, whose cross sectional shape is the solid regular polygon. Volumes of the objective arches are always held constant regardless shape functions of the cross-sectional depth. The shape functions are chosen as the linear, parabolic and sinusoidal ones. Ordinary differential equations governing free vibrations of such arches are derived and solved numerically for determining the natural frequencies. In the numerical examples, hinged-hinged, hinged-clamped and clamped-clamped end constraints are considered. As the numerical results, the relationships between non-dimensional frequency parameters and various arch parameters such as rise ratio, section ratio, side number, volume ratio and taper type are reported in tables and figures.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.193-200
• /
• 2003

The use of underground transmission tables has continuously increased in densely inhabited urban and suburban area. Due to a increasing demand of underground cables, two or more circuits are installed in parallel for several kilometers. It, however, has not been realized that the sheath circulating current is generated in the system where a large number of cables are laid in the same route. In this paper, Author studied diversely the sheath circulating current on underground cables depending on the various length rate, the phase arrangement, and the grounding resistance of the sheath in the cross-bonded section. It was clear that very large circulating current is generated in cable systems due to unbalanced length rate and phase arrangement in the cross-bonded section.

• 대한영양사협회학술지
• /
• 제23권2호
• /
• pp.180-191
• /
• 2017

The purpose of this study was to identity the probability of cross-contamination from the environment. For this, we examined foodservices at 20 universities/colleges for microbiological analysis of their working facilities and environment as well as their preventive equipment against cross-contamination. Seventy percent of the 20 foodservices were found to maintain one unified working area, which suggests high probability of contamination of food/utensils/equipment in the cooking area by pre-preparation or dish washing. According to the microbiological analysis, the hygiene acceptance ratio of working facilities in the clean zone was 70%, which was higher than the average 45% hygiene acceptance ratio of working facilities in the contamination operating zone. There was a significant difference in the total plate count (P<0.001) and coliform count (P<0.01), which demonstrates that work tables in the clean zone were in a good state compared to those in the contamination operating zone. In the contamination operating zone, refrigerator shelves had a high probability of cross-contamination. Regarding the floor surface and airborne microbes, cooking areas which should be maintained as clean zones had higher cross-contamination probability than those in the contamination operating zone. So corrective actions such as cleaning and sanitizing, keeping dry floors, lowered temperature and humidity, shoe disinfecting facilities, and checking concentrations, are necessary to manage floor surfaces and airborne microbes in the cooking area.