• The Korean Journal of Emergency Medical Services
• /
• v.12 no.2
• /
• pp.85-97
• /
• 2008

Purpose : This study was cross-sectional study to examine the influence of job stress in 119 briefing room workers and aimed to provide the important basic materials for improving working conditions of 119 briefing room workers and further studies. Methods : This study selected 271 workers of 119 briefing room at National Emergency Management Agency and fire stations, metropolitan cities and provinces to examine the influences of job stress of 119 briefing room workers on depression. and as a result of analysis, the following conclusions. Results : 1) The whole average of job stress measure was 3.30. The highest area was interpersonal relationship factor as 3.41, 'job characteristic factor' as 3.36 and communication factor' as 3.01. 2) Total score of whole items of depression was 11.88 and showed slight depression level. 3) There was static correlation between job stress and depression(r=44.7, p= .000). There were statistically significant static correlations between job stress factor and depression(r= .388, p= .000), interpersonal relationship factor and depression(r= .471, p= .000), and communication factor and depression(r= .386, p= .000). 4) There was statistically significant difference in the influence of job stress on depression(B=8.575, p< .001). Influence of job stress on depression was explained as $R^2=.200$. When job stress factors as independent variables were input, interpersonal relationship factor(B=5.062, p< .001) had the greatest influence on depression and there was no statistically significant difference in communication factor(B=2.490, p< .05). Conclusions : It is considered that development of the various programs including program for getting rid of job stress of 119 briefing room workers and counseling program will be needed. particularly, factors such as human relationships and communication in the area of job stress must be the first priority.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.648-662
• /
• 1993

The summarized findings resulted from experiments and investigation are suggested as follows ; The analysis of measurements on the lower limb movements : For this experimentation, data was collected from three hundred and eighty female, age 19 to 23, who answered five lower limb movements(M1~M5). The statistics show that the order of the expansion ratio is gluteal area-length/knee-girth/back-line/knee-depth/thigh-depth/hip-girth, from the highest to the lowest in all movements. When comparing the correlation coefficient of the measurements, the values of the correlation coefficient of the height and the length items are very low, but those of the girth, the breadth, and the depth items are relatively high and those of the waist and the hip items are highest. For more sophisticated analysis, the factor analysis was conducted on the lower limb movements. Four factors were classified on the factor load by the "varimax rotation" method. Each movement shows the most important factor differently, as follows ; the most important factor in M1 is "the shape factor of lower limb below hip-line", that in M2 is "the cross-sectional shape factor", that in M3 is "the size factor of abdominal and loins region", and those in M4 and M5 accord with the interpretation of M3. When the investigation of the estimated function was conducted, in the selectional case of representative items on the slacks construction, it found that it would be better to add abdomen and thigh items as important considerations to waist girth, hip girth and crotch length.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1870-1875
• /
• 2007

The microchannel heat sink is promising heat dissipation method for high heat flux source. Contrary to conventional circular channel, MEMS based microchannel had rectangular or trapezoidal cross-sectional shape. In our study, we conducted three dimensional conjugate heat transfer calculation for rectangular shape microchannel. First, we simulated that channel was completely drained with known heating power. As a result we obtained calibration line, which indicates heat loss was function of temperature. Second, we simulated single phase heat transfer with various mass flux, 100-400 $kg/m^2s$. In conclusion, the single phase test verified that the present heat loss evaluation method is applicable to micro scale heat transfer devices. Heat fluxes from each side wall shows difference due to non-uniform heating. However those ratios were correlated with supplied total heat. Finally, we proposed effective area correction factor to evaluate appropriate heat flux.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.55-63
• /
• 1997

The empirical factor and reaction force based on published data were involved to investigate compressible flows through sudden enlargement and sudden contraction passages. Analytical solutions of engineering interest were obtained from one-dimensional steady compressible gas dynamic equations. The effects of com- pressibility, cross-sectional area ratio, and inlet Mach number on the air flows were discussed with regards to the total pressure loss and flow choking. The present results provide available information necessary to design the compressible pipe flow systems.

• Korean Journal of Occupational Health Nursing
• /
• v.21 no.2
• /
• pp.87-97
• /
• 2012

Purpose: This study was to examine the relationship between recovery experience and the burnout among hospital nurses. Methods: A cross-sectional survey design was used. The participants were 281 nurses working at three general hospitals located in Seoul and Gyeonggi Province. The data were collected by convenience sampling using self-reported questionnaires that consisted of general characteristics, burnout, recovery experiences, self-efficacy, social support, job demand and organizational system. The data were analyzed with descriptive statistics, t-test, ANOVA, correlation, and stepwise multiple regression. Results: Stepwise multiple regression showed that organizational system had the greatest impact on hospital nurses' burnout, followed by job demand, self efficacy, position and recovery experience. Conclusion: Recovery experience is found to be a new factor that influences the burnout among hospital nurses. Therefore, further research is needed for confirming that recovery experience influences the burnout of hospital nurses. Also there is a need to develop a program to increase recovery experience from job stress at the organizational level to reduce hospital nurses' burnout.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.134-137
• /
• 2003

Newton-Raphson is most used algorithm in EIT(electrical impedance tomography), cross-sectional distribution of resistivity is reconstructed by mean of both generating and sensing electrodes attached onto the surface of the object. EIT has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal resistivity values. In this paper, we propose modified cost function and weighting factor that compensate for low sensitivity between boundary measurements and internal resistivity and improve performance of Newton-Raphson for EIT in region of interest.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.235-244
• /
• 1997

The empirical factor and reaction force based on published data were involved to investigate compressible flows through sudden enlargement and sudden contraction passages. Analytical solutions of engineering interest were obtained from one-dimensional steady compressible gas dynamic equations. The effects of compressibility, cross-sectional area ratio, and inlet Mach number on the air flows were discussed with regards to the total pressure loss and flow choking. The present results provide available information necessary ta design the compressible pipe flow systems.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.25-29
• /
• 1994

A series of 6 reinforced concrete beams was tested to verify the effects of EBSP strengthened on cracked beams and to identify the various parameters affecting structure strengthening design(SSD). The parameters were the cross-sectional area of steel plates, the thickness of steel plates, and bond length of steel plates. In addition to these parameters, the effect of existing cracks on the strengthening was investigated. Test results show that EBSP is very effective and predictable for strengthening damaged structures. The results also show that the bond length of steel plates is the most important factor to develop ultimate load carrying capacities of strengthened beams. However, considerations in SSD should be given to assure the ductile failure at ultimate load such as the low ratio of thickness to the width of plates.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.143-150
• /
• 2006

Recently, in proportion to increased demand on environmentally-friendly heat source, efficient management of district heating(DH) system becomes one of important issue. The objectives of this paper are to systematize data processing of transition temperature, investigate the effect of temperature variations on thermal fatigue and find out a way to improve design fractures of Korean DH pipes. For this purpose, reliable fatigue lift evaluation procedures are examined and applied to quantify thermal fatigue lives. Also, as a prototypal optimization analysis results, mean value of original cross sectional area of selected pipes was reduced 18.6% sustaining their sufficient margins against fatigue failure. So, it is anticipated that the output of this research can be used as useful information of optimal design and operation in the future.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.78-85
• /
• 1999

In this study, I-type girders used as main members of a two span continuous steel bridge, are optimally designed by a Load and Resistance Factor Design method(LRFD) using an numerical optimization method. The width, height web thickness and flange thickness of the main girder are set as design variables, and light weight design is attempted by choosing the cross-sectional area as an object function. The main program is coded with C++ and connected with optimization modul ADS, which is coded with FORTRAN. The results of the program show that the stress constraints of noncomposite section during the initial construction stage become active in the positive moment area and the service limit state constaints become active in the negative moment area.