• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.609-625
• /
• 2015

Management of infrastructure stock is essential in sustainability of society, and its analysis and optimization are studied in the light of control system modeling in this paper. At the first part of the paper, cost of stock management is analyzed based on macroscopic statistics on infrastructure stock and economical growth. Stock management burden relative to economy is observed to become larger at low economic growth periods in developed economies. Then, control system modeling of stock management is introduced and by augmenting maintenance actions as control input, dynamic behavior of stock is simulated and compared with existing time history statistics. Assuming steady state conditions, applicability of the model to cross sectional data is also demonstrated. The proposed model is enhanced so that both preventive and corrective maintenance can be included as system inputs, i.e., feedforward and feedback control inputs. Optimal management strategy to achieve specified deteriorated stock level with minimal cost, expressed in terms of preventive and corrective maintenance actions, is derived based on estimated parameter values for corrosion of steel bridges. Relative cost effectiveness of preventive maintenance is shown when target deteriorated stock level is lower.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.693-718
• /
• 2016

This paper presents a finite element procedure based on Bridging multi-scale method (BMM) in order to incorporate the effect of local/cross-sectional deformations (e.g., flange local buckling and web crippling) on the global behaviour of thin-walled members made of fibre-reinforced polymer composite laminates. This method allows the application of local shell elements in critical regions of an existing beam-type model. Therefore, it obviates the need for using computationally expensive shell elements in the whole domain of the structure, which is otherwise necessary to capture the effect of the localized behaviour. Consequently, highly accurate analysis results can be achieved with this method by using significantly smaller finite element model, compared to the existing methods. The proposed method can be used for composite polymer laminates with arbitrary fibre orientation directions in different layers of the material, and under various loading conditions. Comparison with full shell-type finite element analysis results are made in order to illustrate the efficiency and accuracy of the proposed technique.

• 한국IT서비스학회지
• /
• 제8권1호
• /
• pp.73-97
• /
• 2009

The IT implementation literature suggests that various implementation factors play critical roles in the success of an information system; however, there is little empirical research about the implementation of data warehousing systems has unique characteristics that may impact the importance of factors that apply to it. In this study, a cross-sectional survey investigated a model of data warehousing success. Data warehousing managers and data suppliers from 51 organizations completed paired mail questionnaires on implementation factors and the success of the warehouse. The purpose of this study is to identify which factors have a positive impact on the successful implementation of DW among organizational implementation success, project implementation success, and technical implementation success which are selected as implementation factors of DW. To do so, this study comprehensively analyze the previous studies on the success factors of the information system and DW to develop the study model and set the hypothesized. Then, it verified the hypothesis via the empirical analysis after collecting the materials through the survey. Finally, the discussion of the study's results, offered the implications of the findings, and the conclusions of the findings followed.

• 한국유기농업학회지
• /
• 제16권3호
• /
• pp.275-286
• /
• 2008

This paper examines the impact of reliability on consumers' demand for environmentally friendly agricultural products using ordered logit model. We survey 100 housewives living in the capital region and five metropolitian cities cross sectional data in 2007. This paper especially estimates the impact of instrumental factor, such as history tracking system, provision of information, safety assurance and labelling of brands on the consumers' demand. The main results show that provision of information and safety assurance affect consumers' demand more confident than others. In order to motivate consumers to buy more environmentally friendly agricultural products, the safety should be assured and more information on production and marketing channel should be labelled.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.56-62
• /
• 2021

In this study, design technology of a non-mechanical flow meter using fluidic oscillation generated during the fluid flow in the chamber was investigated. To with respect to design a splitter, which is the most important factor in fluid oscillation, a transient flow simulation analysis was performed for three types of shapes and changes in inlet flow velocity. The oscillation characteristics with respect to the time in each case were compared, and it was confirmed that the SM03 model was the best among the presented models. In addition, the FFT analysis of the fluid oscillation results for the SM03 model was used to obtain a linear correlation between the flow velocity change and the maximum frequency, and a frequency of 20.957 (Hz/m/s) per unit flow velocity was obtained. Finally, injection molding simulation and molding experiment of the chamber with the designed splitter were performed.

• 한국전문물리치료학회지
• /
• 제30권2호
• /
• pp.120-127
• /
• 2023

Background: In general, measurement qualities of cross-culturally adapted quality of life (QOL) measures are altered in many aspects, although versions of them are well-validated measures. The latent trait and measurement qualities of the QOL measures for cancer-related samples should be considered when developing cross-culturally adapted measures. Objects: To investigate the latent trait of the translated into Korean World Health Organization Quality of Life-BREF (WHOQOL-BREF) administered to different cancer survivors who had palliative rehabilitation care service (PRCS). Methods: A cross-sectional study with 139 cancer survivors who had an experience of cancer survivorship with PRCS were conducted with a two-step analytic procedure including exploratory factor analysis (EFA) to confirm the latent trait and Rasch rating scale modeling to investigate the measurement qualities of the cross-culturally adapted WHOQOL-BREF measure. Results: While the original WHOQOL-BREF measure constitutes a 4-latent trait, the EFA reveals that 24 items constitute six substantial factors. The item loadings are predominantly spread over factors 1 through 4 in a mixed manner of the latent traits, while the loadings of 'physical health' and 'environmental health' latent traits show similarity to what the original measure intended to assess. The latent trait of the cross-culturally adapted WHOQOL-BREF measure administered to different cancer survivors is likely to reveal more dimensions than the original WHOQOL-BREF measure. Person reliability (i.e., analogous to Cronbach's alpha) and separation are measured with 0.92 and 3.48, respectively. All items except the one item (medical treatment item) fit the Rasch rating model. Conclusion: Findings suggest that the latent trait and the measurement qualities of the cross-culturally adapted WHOQOL-BREF measure should be taken into consideration when applying versions of it to various populations.

• 구강회복응용과학지
• /
• 제30권3호
• /
• pp.215-222
• /
• 2014

본 연구는 수평적, 수직적 안면 골격 유형에 따른 하악 전치부 치조골의 형태학적 차이를 알아보기 위하여 시행 하였다. 연구 재료 및 방법: 40명의 Cone-beam computed tomography (Cone-beam CT)를 선별하여, 4개 군으로 분류하였다. Cone-beam CT 자료를 이용하여 하악 전치부 치조골의 부피($mm^3$), 하악 4절치 치축 기준 시상단면의 단면적(총 단면적, 해면골 단면적: $mm^2$), 백악법랑경계(cemento-enamel junction: CEJ) 2 mm, 3 mm 아래 순, 설측 치조골 두께를 측정하였다. 통계분석은 GLM, Kruskal-Wallis test and Tukey HSD를 사용하였다. 결과: 측절치의 백악법랑경계 2 mm, 3 mm 하방 설측 치조골 두께가, Class I low angle군이 나머지 3군 보다 두꺼웠다 (P < 0.05). 하악 전치 치조골의 부피, 전체 치조골 및 해면골의 단면에서의 통계적으로 유의한 차이는 없었다. 결론: Class I low angle군은 Class II high angle군에 비해 하악 전치 치조골의 설측 부위가 더 두껍다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.81.1-81.1
• /
• 2011

High temperature proton exchange membrane fuel cell (HT-PEMFC) has been regarded as a promising clean energy sources. In this study, a quasi-three-dimensional dynamic model of HT-PEMFC has been developed and the local dynamic characteristics are investigated. The model has the geometrical simplification of 2+1D reduction (quasi-3D). The one-dimensional model consists of nine control volumes in cross-sectional direction to solve the energy conservation and the species conservation equations. Then, the one-dimensional model is discretized into 25 local sections along the gas flow direction to account for gas and thermal transport in channels. With this discretization, the local characteristics of HT-PEMFC such as species conservation, temperature, and current density can be captured. In order to study the basic characteristics of HT-PEMFC, it is important to investigate the local dynamic characteristics. Thus, the model is simulated at various operating conditions and the local dynamic characteristics related to them are observed. The model is useful to investigate the distribution of HT-PEMFC characteristics and the physical phenomena in HT-PEMFC.

• 전기전자학회논문지
• /
• 제28권2호
• /
• pp.158-167
• /
• 2024

본 논문에서는, 시뮬레이션 상에서 반도체 후단 공정의 프로세스를 구현하고 파이프 내부 상황을 모니터링하기 위해 전기 정전용량을 기반으로 한 U-net 모델을 적용하였다. 배관에 부착된 전극에서 측정한 정전용량 값은 U-net 네트워크 모델의 입력 데이터로 사용되며, 모델을 통해 추정한 유전율 분포를 가지고 파이프 단면을 이미지화하였다. 성능 평가를 위해 수치 시뮬레이션 얀에서 U-net 모델, FCNN(Fully-connected neural network) 모델, Newton-Raphson 방법으로 재구성한 이미지를 비교한 결과, U-net이 다른 이미지 복원 방식보다 좋은 복원 성능을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.108-113
• /
• 2002

This paper presents a multi-step structural design optimization method fur machine tool structures using a genetic algorithm with dynamic penalty. The first step is a sectional topology optimization, which is to determine the best sectional construction that minimize the structural weight and the compliance responses subjected to some constraints. The second step is a static design optimization, in which the weight and the static compliance response are minimized under some dimensional and safety constraints. The third step is a dynamic design optimization, where the weight static compliance, and dynamic compliance of the structure are minimized under the same constraints. The proposed design method was examined on the 10-bar truss problem of topology and sizing optimization. And the results showed that our solution is better than or just about the same as the best one of the previous researches. Furthermore, we applied this method to the topology and sizing optimization of a crossbeam slider for a high-speed machining center. The topology optimization result gives the best desirable cross-section shape whose weight was reduced by 38.8% than the original configuration. The subsequent static and dynamic design optimization reduced the weight, static and dynamic compliances by 5.7 %, 2.1% and 19.1% respectively from the topology-optimized model. The examples demonstrated the feasibility of the suggested design optimization method.