• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.193-200
• /
• 2003

The use of underground transmission tables has continuously increased in densely inhabited urban and suburban area. Due to a increasing demand of underground cables, two or more circuits are installed in parallel for several kilometers. It, however, has not been realized that the sheath circulating current is generated in the system where a large number of cables are laid in the same route. In this paper, Author studied diversely the sheath circulating current on underground cables depending on the various length rate, the phase arrangement, and the grounding resistance of the sheath in the cross-bonded section. It was clear that very large circulating current is generated in cable systems due to unbalanced length rate and phase arrangement in the cross-bonded section.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.39-49
• /
• 2022

This research investigates a rotary disk with variable cross-section and incompressible hyperelastic material with functionally graded properties in large hyperelastic deformations. For this purpose, a power relation has been used to express the changes in cross-section and properties of hyperelastic material. So that (m) represents the changes in cross-section and (n) represents the manner of changes in material properties. The constants used for hyperelastic material have been obtained from experimental data. The obtained equations have been solved for different m, n, and (angular velocity) values, and the values of radial stresses, tangential stresses, and elongation have been compared. The results show that m and n have a significant impact on disk behavior, so the expected behavior of the disk can be obtained by an optimal selection of these two parameters.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.173-203
• /
• 2014

The cross-section warping due to the passage of high-speed trains can be a relevant issue to consider in the dynamic analysis of bridges due to (i) the usual layout of railway systems, resulting in eccentric moving loads; and (ii) the use of cross-sections prone to warping deformations. A thin-walled beam formulation for the dynamic analysis of bridges including the cross section warping is presented in this paper. Towards a numerical implementation of the beam formulation, a finite element with seven degrees of freedom is proposed. In order to easily consider the compatibility between elements, and since the coupling between flexural and torsional effects occurs in non-symmetric cross-sections due to dynamic effects, a single axis is considered for the element. The coupled flexural-torsional free vibration of thin-walled beams is analysed through the presented beam model, comparing the results with analytical solutions presented in the literature. The dynamic analysis due to an eccentric moving load, which results in a coupled flexural-torsional vibration, is considered in the literature by analytical solutions, being therefore of a limited applicability in practice engineering. In this paper, the dynamic response due to an eccentric moving load is obtained from the proposed finite element beam model that includes warping by a modal analysis.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2007년도 특별심포지엄 논문집
• /
• pp.19-36
• /
• 2007

열차가 고속으로 터널을 주행하는 경우, 터널내부의 압력변동은 곧 차량내부의 압력변동으로 전달되어 승객의 귀를 아프게 하는 경우가 있다. 이러한 현상을 이명감이라 하며, 이명감은 승객의 불쾌감을 증가시켜 서비스 수준을 저하시키고, 심할 경우 승객의 귀를 손상시킬수 있으므로 고속철도 터널설계시 반드시 고려해야 한다. 이에, 국내 및 해외 고속철도의 경우, 이명감 기준을 수립하여 적용하고 있으나, 개인의 주관적 차이 및 승객에 대한 서비스 수준의 차이 등에 따라 서로 상이한 기준이 적용되고 있다. 따라서, 본 논문에서는 국내 외 이명감 기준을 조사 분석하였으며, 이를 토대로 수치 시뮬레이션을 수행하여 호남고속철도의 터널단면을 검토하였다. 또한, 경부고속철도를 운행하는 열차의 터널통과시 압력변동량을 측정하여, 수치시뮬레이션 입력조건으로 사용된 각종 매개변수 등의 적정성을 비교 검증하였다.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.71-78
• /
• 2010

도로의 안전성은 종단선형, 평면선형, 횡단경사(편경사), 노면온도 등 여러 가지 요인에 의하여 결정되며 이러한 각종 데이터는 도면으로 구하기 어렵고 실제 도면과 현황 데이터가 포장의 덧씌우기 등으로 달라지는 경우가 있다. 이러한 데이터를 측량하기 위해서는 많은 시간과 비용이 필요하고 차량의 통행이 빈번한 곳에서는 위험한 작업이 될 수 있다. 본 연구에서는 한국건설기술연구원의 도로 안전성 조사 분석차량인 RoSSAV(Road Safety Survey & Analysis Vehicle) 차량을 이용하여 주변 교통류 속도와 맞추어 차량에 부착된 GPS-INS와 회전식 레이저를 이용하여 도로의 횡단경사를 취득하고 분석을 통하여 도로의 안전성을 분석하고 도로의 안전성 개선방향에 대하여 제시하였다. 이를 위하여 측정된 값의 정확도를 비교하였으며 회전식 레이저데이터 처리 알고리즘을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제28권5호
• /
• pp.587-601
• /
• 2008

In this study, a numerical procedure based on the finite element method for materially and geometrically nonlinear analysis of reinforced and prestressed concrete slender columns with arbitrary section subjected to combined biaxial bending and axial load is developed. In order to overcome the low computer efficiency of the conventional section integration method in which the reinforced concrete section is divided into a large number of small areas, an efficient section integration method is used to determine the section tangent stiffness. In this method, the arbitrary shaped cross section is divided into several concrete trapezoids according to boundary vertices, and the contribution of each trapezoid to section stiffness is determined by integrating directly the trapezoid. The space frame flexural theory is utilized to derive the element tangent stiffness matrix. The nonlinear full-range member response is traced by an updated normal plane arc-length solution method. The analytical results agree well with the experimental ones.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.29-38
• /
• 1992

Approximate Constant Shear Angle Theory is usually used to take a transversal shear deformation of thick plate into consideration, which cannot be effectively considered the influence of transversal warping of cross-section with an increase of thickness. It right be the best way to represent the exact warping of cross-section. In this study, the derivation of warping function is attempted, and the effect of shear deformation and transversal warping is to be considered through the nolinear analysis of plate.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1918-1925
• /
• 1989

A method for computing the capacitance and inductance matrix for 2-D multiconductor transmission lines with arbitrary cross section in dielectric medium is presented. The integral equation is obtained by using a free space Green function in conjunction with free and bound charges existing on boundary surfaces. The numerical analysis is based on the moment method using point matching and Galerkin method. And kthe scheme to reduce memory and computation time is presented for symmetric structure.

• 한국농공학회지
• /
• 제43권1호
• /
• pp.122-128
• /
• 2001

The theory of non-prismatic folded plate structures was reported by D.H. Kim in 1965 and 1966. Fiber reinforced composite materials are strong in tension. The structural element for such tension force is very thin and weak against bending because of small bending stiffnesses. Naturally, the box type section is considered as the optimum structural configuration because of its high bending stiffnesses. Such structures can be effectively analyzed by the folded plate theory with relative ease. The “hollow” bending membr with uniform cross-section can be treated as prismatic folded plates which is a special case of the non-prismatic folded plates. In this paper, the result of analysis of a folded plates with one box type uniform cross-section is presented. Each plate is made of composite laminates with fiber orientation of [ABBCAAB]r, with A=-B=45${\circ}C$, and C=90${\circ}$. The influence of the span to depth ratio is also studied. When this ratio is 5, the difference between the results of folded plate theory and beam theory is 1.66%.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.119-128
• /
• 2020

본 연구에서는 구조물 유지관리에서의 정확한 미세먼지 농도 계측을 위한 새로운 알고리즘을 제안하고 검증한다. 기존 광산란법 미세먼지 측정기의 측정 오차를 보완하기 위해 초음파 다중 산란 알고리즘을 제안하였으며, 산란자의 배치와 산란 반경을 구현하기 위해 표준입자 및 실제 미세먼지의 SEM 촬영을 진행하였다, 초음파 다중 산란 이론식을 통해 초음파 신호의 주파수별 감쇠율과 산란 반경으로 미세먼지의 개수밀도를 나타내는 알고리즘을 도출하였고, 이론식과 수치해석을 통해 총 12가지의 미세먼지 형상에 대한 산란 반경을 도출하였다. 유한차분법을 기반으로 다중 산란 이론을 적용한 2-D 시간 이력 해석을 통하여 알고리즘을 검증하였으며, 신호 해석을 위한 신호 처리 기법을 나타내었다. 결과, 산란 반경에 해당하는 알고리즘의 오차는 개수밀도 단위 최소 19(1%), 최대 3455(52%)로 계산되었다. 산란반경 외에 실제 미세먼지 형상에 대한 부피를 반영하여야 하는 추후 연구가 필요함을 토의하였다.