• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1077-1084
• /
• 2002

Optimum tool design is carried out fur a multi-stage rectangular cup deep-drawing and ironing process with the large aspect ratio. Finite element simulation is carried out to investigate deformation mechanisms with the initial design made by an expert. The analysis considers the deep drawing process with ironing for the thickness control in the cup wall. The analysis reveals that the difference of the drawing ratio within the cross section and the irregular contact condition produce non-uniform metal flow to cause wrinkling and severe extension. For remedy, the modification guideline is proposed in the design of the tool and the process. Analysis results confirm that the modified tool design not only improves the quality of a deep-drawn product but also reduces the possibility of failure. The numerical result shows fair coincidence with the experimental one. After tryouts of the tool shape, the rectangular cup has been produced in the transfer press.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.49-52
• /
• 2007

Recently, as architectural concrete structures become high-rise and megastructured, concrete become high-strengthened and, by ensuring products of more stability, air compression and rationalization of construction are required. In general, product management test of precast concrete member, specimen for management cured in the same condition with precast concrete member is substitutively used for strength test. However, large cross-sectional precast concrete members such as columns show large temperature increase in manufacturing process not only by external heating but also by concrete itself's hydration heating. Therefore, it is expected that specimen for management to predict strength and compression strength of precast concrete member shows different temperature history and strength characteristics. Concerning this, in order to suggest temperature history and strength characteristics of high strength mass concrete suitable for precast concrete application, this study comprises the inclusive investigations on the relations between management specimen with similar temperature history and core strength, and the strength characteristics per member cross-section dimensional value and per water-bonding material ratio value.

• 한국정밀공학회지
• /
• 제24권4호
• /
• pp.102-108
• /
• 2007

The characteristic properties of aluminum, high strength stiffness to weight ratio, good formability, good corrosion resistence, and recycling potential make it the ideal candidate to replace heavier materials in the car to respond to the weight reduction demand within the automotive industry. In this paper, FE simulation was carried out to design an appropriate extrusion die for the automobile control arm. Based on the FE simulation result, a new die design has been proposed for uniform material flow in the cross section of extruded product. And then the welding pressure, extrusion load, and the tendency of mandrel deflection were estimated to verify high quality. In the extrusion experiment, it was possible to produce sound product without defects.

• 소성∙가공
• /
• 제8권2호
• /
• pp.160-168
• /
• 1999

This paper is concerned with the process sequence design of longneck flange forming by using cold extrusion with thick hollow pipe. The conventional hot forming process to produce a longneck flange is investigated by thermo-viscoplastic finite element method to observe the metal flow in detail and evaluate design requirements. Based on the results of simulation of the current hot forming process, design strategy for improving the process sequence are developed using the thick hollow pipe. The main goal is to obtain an appropriate improved process sequence which can produce the required product most economically without tensile cracking, workpiece buckling, and overloading of tools. Newly process condition such as semi-die angle, reductio ratio of cross-sectional area of axisymmetrical extrusion process. The final designed process can provide very useful guidelines to other flange forming industries.

• 소성∙가공
• /
• 제23권3호
• /
• pp.145-150
• /
• 2014

Precision control of the slab is crucial for product quality and production economy in hot strip mills. The current study presents a new model for predicting width spread of a slab with a rectangular cross section during roughing. The model is developed on the basis of the extremum principle for a rigid plastic material and a three dimensional admissible velocity field. This model incorporates the effect of process variables such as the shape factor and the ratio of width to thickness. We compare the results of this model to 3-D finite element (FE) process simulations and also to results from a previous study.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.75-81
• /
• 2017

A series of laboratory experiments has been performed in order to investigate the behavior of water-air two-phase flow in a horizontal pipe. A conductivity meter has been applied to detect the irregular alternation of air at the specific points in flows. The experimental condition has been established according to the water and air flowrates. Passing time, which is the time length for a measuring probe to pass through the entire length of a specific bubble, has been defined to evaluate the size of bubbles in the flow. Passing length, which can be considered as the equivalent value to bubble size and determined from the product of passing time and cross-sectional averaged velocity, and its corresponding occurrence frequency have been analyzed to classify the air flow patterns according to the condition of air and water fluxes. From the result, the dependancy of flow patterns on the variation of air-water flux ratio has been investigated and the existence of thresholds also checked for classifying the behavior of air in the flow.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.190-199
• /
• 1993

본 연구에서는 화염간 상호작용이 연소생성물 형성에 미치는 영향을 규명하기 위한 작업의 일환으로 대표적 연소 생성 공해 물질의 하나인 NO를 택하여 상호작용하 의 층류 확산화염에서 NO의 생성이 어떻게 이루어지는가를 검토 하고자 한다. 이를 위하여 기본적 다화염계인 2-화염계를 모사하는 수학적 모델을 수립하고 수치 계산을 통한 이론적 방법을 위주로하여 2개의 층류 확산 화염이 나타내는 상호작용 특성과 화 염간 상호작용이 NO형성에 미치는 영향을 규명하고자 한다.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2982-2990
• /
• 2011

본 연구는 파생상품사용이 국내생명보험회사의 기업가치에 미치는 영향을 분석하였다. 국내에서 영업중인 20개 생명보험회의 2002년부터 2009년까지 자료를 사용하여 전체표본에 대한 횡단면분석법으로 접근하였으며 다중회귀 분석모형을 사용하였다. 분석 결과로 파생상품사용액은 기업가치에 미치는 영향이 유의하지 않았으며 레버리지, 대출 수익률, 저축성상품 구성비율, 사업비용 비율이 감소할 수록 기업가치가 증대하는 것으로 나타났다.

• Biomolecules & Therapeutics
• /
• 제15권3호
• /
• pp.187-191
• /
• 2007

This study was conducted to compare the bioavailability of two brands of atenolol (50 mg) tablets, which are a generic product of $Ditent^{\circledR}$ (Daewon Pharmaceutical Co., Ltd., Korea) and an innovator product $Tenormin^{\circledR}$ (Hyundai Pharm. Ind. Co., Ltd., Korea), in 20 healthy Korean male volunteers. The volunteers received a single 50 mg dose of each atenolol formulation according to a randomized, two-way cross-over design. The washout period between treatments was 1 week. Plasma samples were obtained over a 24-hour interval, and atenolol concentrations were determined by HPLC with a fluorescence detector. From the plasma atenolol concentration vs. time curves, the following parameters were compared: area under the plasma concentration-time curve ($AUC_{0-24}$), peak plasma concentration ($C_{max}$), time to reach peak plasma concentration ($T_{max}$), and terminal first order elimination half-life ($t_{1/2}$). No statistically significant difference was obtained between the $T_{max}$ values, and the logarithmic transformed $AUC_{0-24}$ and $C_{max}$ values of the two products. The 90% confidence interval for the ratio of the logarithmically transformed AUC and $C_{max}$ values of $Ditent^{\circledR}$ over those of $Tenormin^{\circledR}$ were calculated to be between 0.85 and 1.04, and 0.89 and 1.07, respectively; both were within the bioequivalence limit of 0.80-1.25. The mean of $T_{max}$ in $Tenormin^{\circledR}$ group was 3.1 hour, and that in Ditent$^{\circledR}$ group was 3.2 hour. The values of $t_{1/2}$ between the two products were found comparable, and the mean values were 5.2 hour in the both products. Based on these results, it was concluded that $Ditent^{\circledR}$ was comparable to $Tenormin^{\circledR}$ in both the rate and extent of absorption, indicating that $Ditent^{\circledR}$ was bioequivalent to the reference product, $Tenormin^{\circledR}$.

• 대한수학교육학회지:학교수학
• /
• 제18권4호
• /
• pp.819-838
• /
• 2016

본 연구는 비와 비율에 대한 기본적인 내용을 배운 5학년 학생들과 비례와 비례식 및 형식적인 전략까지 배운 6학년 학생들의 비례추론 능력을 비교 분석하고, 초등학교의 비례 추론 지도를 위한 시사점을 제공하고자 하였다. 이를 위해 5학년 131명과 6학년 138명 학생들을 대상으로 다양한 과제로 구성된 비례 추론 검사를 실시하여 성취도와 전략을 분석하고, 일부 면담을 실시하였다. 분석 결과 5학년과 6학년 학생들의 평균은 다소 차이는 있었으나 크지 않았고, 과제 유형별로는 5, 6학년 모두 기하 과제보다는 대수 과제, 질적 과제보다는 양적 과제, 비교 과제보다는 미지값 과제에서 높은 점수를 보였으며, 5, 6학년 모두 형식적 전략보다는 인수 전략과 단위 비율 전략 같은 비형식적 전략을 훨씬 더 많이 사용하였고, 비례 상황과 비 비례 상황을 구분하는 데는 여전히 어려움이 있었다. 이런 결과를 바탕으로 학생들의 비례 추론 지도를 위한 시사점으로 다양한 비례 추론 과제의 도입과 학생들의 유연한 전략의 중시를 제안하였다.