• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.287-291
• /
• 2015

본 연구에서는 두 지역의 실제 상수관망에 대해서 부정류해석을 수행하였고 각각의 상수관망에 필요한 부정류피해 최소화방안을 제시하였다. 첫 번째 대상지역은 베트남 호치민으로 148개 절점과 162개의 파이프로 이루어진 소블럭 상수관망이며 두 번째 대상지역은 파주시 광탄면으로 512개 절점과 527개의 파이프로 이루어진 세 개의 소블럭 상수관망이다. 두지역의 상수관망은 지형적면이나 규모면에서 다른 모습을 하고 있기 때문에 부정류해석 시 발생가능한 피해유형이 틀린 것으로 나타났다. 호치민의 경우 배수지의 높이가 낮고 도시 내 표고차가 없어서 관망 내 평균수압이 $1kg/cm^2$을 약간 상회하는 수준으로 수압이 낮고 수압차 역시 작다. 따라서 상수관망에서 일어날 수 있는 소요수량의 변화나 소화전 사용과 같은 작은 변화에도 역류발생이 빈번히 일어나는 것으로 나타났으며 역류발생이 잦은 파이프를 선정할 수 있었다. 상당히 많은 파이프에서 단기간 역류가 발생하는 것을 확인할 수 있었다. 짧은 기간에 발생하는 변화에 대한 단기간 역류는 교차연결(Cross-Connection)의 문제를 야기할 수 있다. 따라서 역류발생이 빈번히 일어나는 파이프 주위에 check valve나 역지밸브등의 설치를 통해 역류로 인한 피해를 최소화할 수 있다. 파주시 광탄면 지역의 소블럭 집합으로써 고저차가 많은 지역이다. 배수지 밸브개폐 시 발생 가능한 수충격에 대한 시뮬레이션과 펌프장정지로 인해 발생할 수 있는 수충격에 발생 시뮬레이션을 수행하였고 관망내에서 자주 발생하는 밸브개폐로 인한 시뮬레이션을 수행하였다. 그 결과 광탄의 경우 수충격 발생위험 지점은 배수지 근처로 나타났고 수격압이 최대 $2.5kg/cm^2$에서 $3.0kg/cm^2$까지 발생 가능한 것으로 나타났고 밸브개폐시간이 1-2초 지연되어도 상당히 큰 수격압을 줄일 수 있는 것으로 나타났다. 수충격압이 크게 발생할 수 있는 지역에 수충격피해 최소화를 위해 surge tank와 같은 장치를 설치해야 한다. 또한 발생가능한 수격압의 크기를 통계적기법을 통해 확률밀도함수로 나타낼 수 있었다. 이 결과는 앞으로 상수관망의 설계나 운영에서 수충격피해 방지 장치 및 설비를 시공할 때 장치의 규모나 용량을 결정할 때 유용한 정보가 될 것으로 판단된다.

• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.390-395
• /
• 2021

Background: Health-care providers typically undergo shift work and are subjected to increased stress. Night shift work may induce disturbed sleep cycles and circadian rhythm. The objective of this study was to explore if night shift workers (NSWs) show an increased risk of abnormal thyroid-stimulating hormone (TSH). Methods: We conducted a retrospective cohort study of 574 employees without thyroid disease and abnormal TSH at baseline who underwent annual check-ups between 2007 and 2016 in a medical center. NSWs were defined as those with working time schedules other than daytime hours. We calculated the incidence rate and estimated the adjusted hazard ratio (HR) for incident abnormal TSH and subclinical hypothyroidism compared with non-NSWs using a Cox regression model. Results: A total of 56 incident abnormal TSH cases and 39 subclinical hypothyroidism cases in NSWs were identified during 3000 person-years of follow-up. In models adjusted for age, sex, obesity, and working departments, we found no increased relative risk for incident abnormal TSH (HR: 0.72, 95% confidence interval: 0.33-1.60) or subclinical hypothyroidism (HR: 0.52, 95% confidence interval: 0.19-1.45) when comparing NSWs to non-NSWs; nor were incidence rates significantly different among exclusively medical employees after excluding administrative staff. Conclusion: In this hospital-based nine-year follow-up retrospective cohort study, NSWs were not associated with increased relative risk of incident abnormal TSH and subclinical hypothyroidism, in contrast to previous cross-sectional studies.

• International Area Studies Review
• /
• v.12 no.3
• /
• pp.25-47
• /
• 2008

This paper tries to explore the impact of economic globalization on social capital accumulation. To investigate direct effect, we build a model and derive a proposition which can explain the relative decline in social capital brought about by market expansion. Besides direct effect, we also explore channel effect through democracy, government size, education attainment, and inequality. We estimate direct and channel effect of globalization using cross section of 65 countries data time period 1980-1999 using three-stage least squares(3SLS). Results are in line with predictions and clearly support that globalization significantly and negatively affects social capital accumulation. Channel effect also shows that globalization has a negative effect through aggravating income inequality while it has a positive effect through higher education attainment, higher level of democracy and larger government spending. Such a net negative channel effect reinforces our prediction. As a robustness check we estimate other sets of data and the result strongly supports our theory.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.98-106
• /
• 2019

Human-powered aircraft has wings with a shape of high aspect ratio which results in large bending displacement. This paper aims to improve the structural limitation by changing an incidence angle of the wings. The tendency change of bending displacement at the wing tip is observed assuming that airfoil and cross-sectional shape of the wing is fixed, and amount of the total lift generated is satisfied. Quasi-steady lift, drag and the aerodynamic moment are distributed with regard to sections of the wing. Those are analyzed using a numerical nonlinear lifting-line method and 'geometrically exact beam' (GEB) program in EDISON. 'Variational Asymptotic Beam Sectional Analysis' (VABS) program is used to check if the present wing is structurally solid. Furthermore, the predicted tip deflections are verified by comparing with DYMORE.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.619-624
• /
• 2018

The purpose of this study was to examine the trend of men's gymnastics on floor exercise final(8 gymnasts) in the 2018 Asian Games through digital video materials. Video recordings of floor exercise final were collected from the 2018 Asian Games. The cross-check with three international gymnastics judges on floor exercise final was analyzed. To fulfil the D-score, 8 gymnasts were the most performed backward saltos elements group(36 elements), forward salto with 1/1 turn(8 gymnasts), backward salto with 5/2 turn(8 gymnasts) and backward salto with 3/1 turn(8 gymnasts). The scores showd average the D score 6.0, E score 7.9, and connection values 0.25. To get a good results on floor exercise, gymnasts need to get a average the D score over 6.0, E score over 8.5, and connection values over 0.3.

• Journal of Oral Medicine and Pain
• /
• v.44 no.3
• /
• pp.92-102
• /
• 2019

Purpose: To investigate the masticatory function of patients with different temporomandibular disorders (TMD) phenotypes, and to explore the risk factors for the masticatory function of TMD patients among multiple biopsychosocial variables using patient-reported outcomes (PROs). Methods: Clinical features and TMD diagnoses of 250 cases were investigated by reviewing medical records. Psychosocial factors were evaluated using four questionnaires representing pain severity and pain interference (Brief Pain Inventory), pain catastrophizing (Pain Catastrophizing Scale, PCS), psychological distress (Symptom Check List-90-Revised, SCL-90R) and kinesiophobia (Tampa Scale for Kinesiophobia for Temporomandibular Disorders, TSK-TMD). Masticatory function, as a dependent variable, was determined using the Jaw Functional Limitation Scale (JFLS). Kruskal-Wallis test and Spearman's rank correlation were used for analyses. Results: A total of 145 cases were included and classified into four subgroups including group 1: TMD with internal derangement without pain (n=14), group 2: TMD with muscle pain (n=32), group 3: TMD with joint pain (n=60) and group 4: TMD with muscle-joint combined pain (n=39). Pain severity (p=0.001) and interference (p=0.022) were the highest in group 2, but the mean global score of JFLS was the highest in group 3, followed by group 4, group 2, and group 1 (p=0.013). Pain severity, pain interference, the mean global score of PCS and the mean global score of TSK-TMD showed significant and moderate correlation with the mean global score of JFLS. All subdimensions and the global severity index of SCL-90R had significant, but weak correlations with all scores of JFLS. Conclusions: The results suggest that masticatory functional limitation depends on the TMD phenotypes. Among the various PROs, pain perception, pain catastrophizing and kinesiophobia seem to be more influential risk factors on jaw function than psychological distress, such as depression and anxiety.

• Clinical and Experimental Pediatrics
• /
• v.62 no.2
• /
• pp.48-54
• /
• 2019

Purpose: Liver metabolism plays a pivotal role in the development of metabolic disorders. We aimed to investigate the clinical and laboratory risk factors associated with alanine aminotransferase (ALT) levels in young adolescents from an urban population in Korea. Methods: A population of 120 apparently healthy adolescents aged 12-13 years was included in the cross-sectional design study; 58 were overweight or obese and 62 were of normal weight. We estimated anthropometric and laboratory measurements, including waist-to-height ratio, blood pressure, insulin sensitivity, aspartate aminotransferases (AST), ALT, and lipid profiles. Results: The mean ages of the overweight or obese and normal weight participants were $12.9{\pm}0.3$ and $13.0{\pm}0.3years$, respectively. Height, weight, body mass index, waist circumference, waist-to-height ratio, systolic and diastolic blood pressure, AST, ALT, total cholesterol, low-density lipoprotein-cholesterol, triglyceride, insulin, and the homeostatic model assessment of insulin resistance (HOMA-IR) score were significantly higher and the high-density lipoprotein-cholesterol and quantitative insulin-sensitivity check index were significantly lower in the overweight/obese participants in comparison to the normal-weight participants (all P<0.05). In multivariate linear regression analysis, waist-to-height ratio, systolic blood pressure, and HOMA-IR score were independently and positively associated with serum ALT levels. Conclusion: Screening for ALT levels in adolescents may help to differentiate those at risk of metabolic abnormalities and thus prevent disease progression at an early age.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.611-620
• /
• 2019

The shield tunnel was mostly applied to cable tunnel with a diameter of 3~4 m, recently 7.8 m diameter shield tunnel was constructed in the lower section of the Incheon International Airport runway and is planning or under construction to roads and railway tunnels in the lower section of the Han River. Segments are also becoming larger as the shield tunnel cross-section increases, which causes a number of problems in the design, construction, and performance evaluation of segments. In this study, segment lining structural safety, criteria for serviceability check considering axial forces and quality control method for approximately 8 m in diameter shield tunnel were reviewed by field measurements and full scale bending test.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.3
• /
• pp.183-190
• /
• 2019

Recent changes in the construction method of piles to minimize noise, along with the development of high-strength reinforcement, have provided an economical high performance RC pile development to compensate for the disadvantages of existing PHC piles. In this study, a methodology for the development of cross - section details of high performance RC piles of various performances is presented by freely applying high strength steel and concrete. This study suggested a technique for calculating bending moments for a given axial force corresponding to the allowable crack widths and this can be used for serviceablity check. In calculating the design shear force, the existing design equation applicable to the rectangular or the I section was modified to be applicable to the hollow circular section. In particular, in the limit state design method, the shear force is calculated in proportion to the axial force, and the procedure for calculating PV diagram is established. Last, the section details are determined through PM diagrams that they have the similar flexural and axial-flexural performances of the PHC pile A, B and C types with a diameter of 500 mm. To facilitate the application of the selected standard sections to the practical tasks, the design PM diagram and design shear forces are proposed in accordance with the strength design method and limit state design method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.539-547
• /
• 2021

Helicopter rotor blade is required to be designed by considering the interacting effects among aerodynamics, flexibility, and controllability. The reverse design allows the structural components to have common characteristics by using the configuration numerics and experimental results. This paper aims to design the composite rotor blade which will feature common characteristics with that of BO-105. The present engineering design procedure is done by dividing the rotor blade into a few sections and composite laminates across the cross section. For each section, variational asymptotic beam sectional analysis (VABS) program is used to evaluate its flapwise, lagwise, and torsion stiffnesses to have discrepancy smaller than certain tolerance. Finally, CAMRAD II is used to predict the stress acting on the rotor blade during the specific flight condition and to check whether the present deign is structurally valid.