• 공업화학
• /
• 제22권6호
• /
• pp.703-710
• /
• 2011

분리막 모듈 내 스페이서는 용액의 원활한 흐름을 위한 공간 확보와 더불어 유체의 난류를 형성시키므로 농도분극화 현상을 감소시키고 막 표면에 축적되는 오염물을 용액 내로 혼합하여 높은 투과유속과 분리막 모듈을 장기간 운전하는데 도움을 준다. 본 연구에서는 분리막 모듈 내 원형, 십자형, 다이아몬드형 및 육각형 단면의 스페이서와 스페이서의 배열 각도, 용질 배제율 및 투과유속에 대한 농도 변화를 "COMSOL Multiphysics" 프로그램으로 수치 해석하여 최적화하였다. 4가지 형태의 스페이서 중에서 십자형 단면 스페이서를 포함한 모듈의 경우가 분리막 표면 농도를 가장 낮게 유지하였으며 스페이서의 배열 각도는 $30^{\circ}$가 효율적이었다. 스페이서가 없는 모듈 출구에서 분리막 표면의 농도는 입구보다 약 2.09배까지 증가하였으나 가장 효율적인 십자형 스페이서를 $30^{\circ}$로 배열할 경우 약 1.29배로서 최대 37% 낮았다. 또한 투과유속이 증가할수록 십자형 스페이서의 농도분극 감소효과는 급격히 증가하였다.

• Structural Engineering and Mechanics
• /
• 제4권1호
• /
• pp.25-35
• /
• 1996

This paper describes a continuum variational formulation for design optimization of nonlinear structures in the elastic-plastic domain, where unloading and reloading of the structures are allowed to occur. The Total Lagrangian procedure is used for the description of the structural deformation. The direct differentiation approach is used to derive the sensitivities of the various structural response measures with respect to the design parameters. Since the material goes into the inelastic range and unloading and reloading of the structure are allowed to occur, the structural response is path dependent and an additional step is needed to integrate the constitutive equations. It can be shown, consequently, that design sensitivity analysis is also path-dependent. The theory has been discretized by the finite element technique and implemented in a structural analysis code. Mathematical programming approach is used for the optimization process. Numerical applications on trusses are performed, where cross-sectional areas and nodal point coordinates are treated as design variables. Optimal designs have been obtained and compared by using two different strategies: a two level strategy where the levels are defined accordingly the type of design variables, cross sectional areas or node coordinates, and optimizing simultaneously with respect to both types of design variables.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.138-145
• /
• 2014

The initial configuration for 95-seat passenger regional turboprop aircraft, the so called KC950, was designed to meet the market requirements. This paper prescribes the initial design based upon aircraft design guidelines and compared the competitive aircraft configurations after considering the related FAR 25 regulations. More specifically, results of design describe how to select the fuselage cross-sectional area, how to layout the cabin, and how to determine the overall shape and physical dimension of the fuselage. Sizing of wing and empennage areas is estimated using empirical equations and tail volume coefficients in this design. Some design guidelines to determine wing sweep angle, taper ratio, incidence angle and location are also introduced.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.34-40
• /
• 2004

본 연구에서는 인체에 무해하며, 고분해능 측정과 저가격화 및 소형으로 제작이 가능한 광섬유를 이용한 광영상단층촬영기 제작에 관한 것이다. 시스템의 기본원리는 마이켈슨 간섭계를 이용한 것으로서 광섬유를 이용하여 간섭계를 구성하였다. 시스템의 구성으로는 광원은 분해능 및 측정범위를 고려하여 1,300(nm) 중심파장을 가지며 대역폭이 35(nm)인 상용제품의 SLD(Superluminersent diode)를 사용하였으며, 샘플내부의 영상을 검출하기 위한 간섭신호 검출방법은 기준거울이 선형적으로 이동하여 광경로를 일치하는 광지연선로를 구성하였다. 그리고 간섭계는 단일모드 광섬유를 이용하여 마이켈슨 간섭계를 구성하였으며, 스캐너는 시준기를 이용하여 샘플에 대한 초점을 고정하였으며, 스텝모터를 이용하여 샘플에 대한 횡단방향의 이동을 통해 샘플의 2차원 단층영상을 측정하도록 하였다. 수광부는 소신호인 간섭신호를 검출하기 위하여 감도가 뛰어나면 잡음특성이 우수한 800-1,700(nm) 측정범위의 광검출기를 사용하였다. 신호처리부에서 간섭신호의 포락선 신호만을 검출하기 위하여 증폭 및 필터링 하여 A/D 변환을 거친 후 영상검출 프로그램을 통해 실시간으로 단층영상을 나타내도록 하였다. 측정결과 분해능은 약 30($\mu\textrm{m}$)로서 이론식과 일치함을 확인하였으며, 샘플을 이용한 단층촬영에서 실시간으로 양파조직의 조직형태를 측정하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권1호
• /
• pp.23-27
• /
• 2003

Structural properties of Cu-Ni alloy films, such as preferred orientation, crystallite size, in-ter-planar spacing, cross-sectional morphology, and electrical resistivity, are investigated in terms of tar-get configurations that are used in the film deposition by means of magnetron co-sputtering. Two different target configurations are considered in this study: a dual-type configuration in which two separate tar-gets (Cu and Ni) and different bias types (RF and DC) are used and a Ni-on-Cu type configuration in which Ni chips are attached to a Cu target. The dual-type configuration appears to have some advantages over the Ni-on-Cu type regarding the accurate control of atomic composition of the deposited Cu-Ni alloy. However, the dual-type-produced film exhibits a porous and columnar structure, the relatively large internal stress, and the high electrical resistivity, which are mainly due to the relatively low mobility of adatoms. The affects of thermal treatment and deposition conditions on the structural and electrical properties of dual-type Cu-Ni films are also discussed.

• Imaging Science in Dentistry
• /
• 제45권2호
• /
• pp.95-101
• /
• 2015

Purpose: This study used cone-beam computed tomography (CBCT) to characterize mandibular molar root and canal morphology and its variability in Belgian and Chilean population samples. Materials and Methods: We analyzed the CBCT images of 515 mandibular molars (257 from Belgium and 258 from Chile). Molars meeting the inclusion criteria were analyzed to determine (1) the number of roots; (2) the root canal configuration; (3) the presence of a curved canal in the cross-sectional image of the distal root in the mandibular first molar and (4) the presence of a C-shaped canal in the second mandibular molar. A descriptive analysis was performed. The association between national origin and the presence of a curved or C-shaped canal was evaluated using the chi-squared test. Results: The most common configurations in the mesial root of both molars were type V and type III. In the distal root, type I canal configuration was the most common. Curvature in the cross-sectional image was found in 25% of the distal canals of the mandibular first molars in the Belgian population, compared to 11% in the Chilean population. The prevalence of C-shaped canals was 10% or less in both populations. Conclusion: In cases of unclear or complex root and canal morphology in the mandibular molars, CBCT imaging might assist endodontic specialists in making an accurate diagnosis and in treatment planning.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.126-131
• /
• 2004

본 논문은 인체에 무해하며 고분해능의 단층영상과 저가격 및 소형으로 제작이 가능하여 전세계적으로 많은 연구가 진행되고 있는 광영상 단층촬영기(Optical coherence tomography system : OCT)에 관한 것이다. 이러한 OCT시스템은 검출되는 신호가 매우 미약하여 신호처리 및 영상화에 많은 어려움을 가지고 있다. 이러한 문제점을 해결하기 위하여 간섭계의 개선을 통해 신호대 잡음비(Signal to noise ration : SNR)가 향상되도록 하였다. OCT 시스템의 SNR 향상을 위하여 광원의 입력단에 광서큘레이터를 첨가하여 광원부에서 손실되는 단층영상신호를 검출할 수 있도록 간섭계를 개선하였다. SNR 특성평가로는 시뮬레이션을 통한 비교 분석과 기준 샘플의 측정값을 통해 확인하였다. 또한 측정된 데이터의 실시간 영상화를 위한 영상처리 프로그램을 구성하였다. 시뮬레이션 결과로는 개선된 마이켈슨 간섭계가 약 10[dB] 개선됨을 확인하였으며, 기준시편을 이용하여 측정한 결과로는 약 5[dB]가 개선됨을 확인하였다. 개선된 마이켈슨 간섭계를 이용한 OCT 시스템이 보다 높은 대비도로 인해 선명도가 뛰어난 단층을 영상을 얻을 수 있음을 확인 하였다.

• KIEAE Journal
• /
• 제13권1호
• /
• pp.9-15
• /
• 2013

This study aims to analyze, by forming an experimental area of artificial soil green area that is of equal scale and analyzing the characteristics of runoff water in accordance with the cross-section configuration, applied the benefits in an actual multi-housing case study complex. In examining the measurement test results of the runoff water infiltration amount and surface runoff amount of a low-profile type green area(Dish type) and a general type green area(Mound type), Dish type was seen to have 1.5-times higher runoff water infiltration amount than Mound type during heavy rainfalls and showed about a 50% reduction with respect to the surface runoff amount. In other words, artificial soil green area offers the benefit of reduction of surface runoff amount and suggests, in actuality even with a change to the cross-sectional configuration of artificial soil green area alone at the time of construction of multi-housings, the possibility of benefits and reduction of costs spent on existing rainwater management facilities.

• 소성∙가공
• /
• 제12권7호
• /
• pp.631-639
• /
• 2003

Ring rolling process is simulated by using the general-purpose commercial finite element analysis software, MSC.Superform. Because the deforming region is restricted to the vicinity of the roll gap, only a ring segment spanning the roll gap is analyzed in order to save computation time and cost. First, a plain ring rolling of rectangular cross-section is simulated. Comparisons between computation and experiment show good agreement in the cross-sectional configuration of the deformed ring. Then, a profile ring with an external round groove is analyzed. The rolls with and without groove have been analyzed to compare the amount of side spread. It is found that the grooves in the rolls are effective in reducing the amount of side spread.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.40-47
• /
• 1993

To diversify the area of application of UBET to the analysis of ring rolling which produces rings having more complex cross-sectional configuration, an element of triangular cross-section has been introduced and the corresponding kinematically admissible velocity field has been derived while considering the material flow between neighboring elements. The theoretical perdictions in roll torque and profile formation show good agreement with the experiments. The effect of process parameters such as feed rate and taper angle of the roll groove has been discussed.