• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2010

Recently, many efforts to solve the durability problem of PEM fuel cell are carried on constantly. However, despite this attention, durability researches of gas diffusion layer (GDL) are not much reported yet. Generally, GDL of PEM fuel cell experiences three external attacks, which are dissolution of water, erosion of gas flow, corrosion of electric potential. In this study, among these degradation factors, carbon corrosion of electric potential was focused and investigated with accelerated carbon corrosion test. Through the test, it is confirmed that carbon corrosion occurred at GDL, and corroded GDL decreased a performance of operating fuel cell. The property changes of GDL were measured with various methods such as air permeability meter, pore distribution analyzer, thermo gravimetric analyzer, and tensile stress test to discover the effects of carbon corrosion. Carbon corrosion caused not only loss of weight and thickness, but also degradation of mechanical strength of GDL. In addition, to analysis the reason of GDL property changes, a surface and a cross section of GDL were observed with scanning electron microscope. After 100 hours test, the GDL showed serious damage in center of layer.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1139-1150
• /
• 1999

The evolution of silica aggregate particles in coflow diffusion flames has been studied experimentally using light scattering and thermophoretic sampling techniques. The measurements of scattering cross section from $90^{\circ}$ light scattering have been utilized to calculate the aggregate number density and volume fraction using with combination of measuring the particle size and morphology through the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh-Debye-Gans and Mie theory for fractal aggregates and spherical particles, respectively. Of particular interests are the effects of flame temperature on the evolution of silica aggregate particles. As the flow rate of $H_2$ increases, the primary particle diameters of silica aggregates have been first decreased, but, further increase of $H_2$ flow rate causes the diameter of primary particles to increase and for sufficiently larger flow rates, the fractal aggregates finally become spherical particles. The variation of primary particle size along the upward jet centerline and the effect of burner configuration have also been studied.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.190-199
• /
• 1993

본 연구에서는 화염간 상호작용이 연소생성물 형성에 미치는 영향을 규명하기 위한 작업의 일환으로 대표적 연소 생성 공해 물질의 하나인 NO를 택하여 상호작용하 의 층류 확산화염에서 NO의 생성이 어떻게 이루어지는가를 검토 하고자 한다. 이를 위하여 기본적 다화염계인 2-화염계를 모사하는 수학적 모델을 수립하고 수치 계산을 통한 이론적 방법을 위주로하여 2개의 층류 확산 화염이 나타내는 상호작용 특성과 화 염간 상호작용이 NO형성에 미치는 영향을 규명하고자 한다.

• 산경연구논집
• /
• 제9권11호
• /
• pp.17-24
• /
• 2018

Purpose - The portability, functionality, and convenience of smart phones are constantly updated. With the rapid popularization of users of mobile terminals, Xiaomi is also developing rapidly. In February 2015, the users of Xiaomi exceeded 100 million people. As a transnational industry, Xiaomi has developed rapidly in not only China but also Korea. However, through the literature review, there is no radmissible study on the Xiaomi mobile telephones in the Korean market, so it is necessary to study the Xiaomi mobile phones in Korean market. Research design, data, and methodology - Figure analysis of data and social science analytical software of IBM SPSS AMOS 23.0 and IBM Statistics 23.0 were used for all the data researched. Results - First, the innovative diffusion temperament and the compatibility of Xiaomi have positive impacts on achievement expectations and effort expectations. Second, the innovative diffusion temperament and the complexity of Xiaomi have negative impacts on achievement expectations and effort expectations. Third, the innovative diffusion characteristics and the relative superiority of Xiaomi have positive impacts on achievement expectations and effort expectations. Conclusions - Through the analysis of the prior study, the innovation acceptance characteristics consist of compatibility, complexity, relative superiority, observation possibility, and the attempt possibility; the technical acceptance characteristics consist of achievement expectations, effort expectations, social influence, promotion condition, the study conducts relevant research on the continued use intention and analyze the hypothesis of research model.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.127-135
• /
• 2007

The objective of this study is to analyze the effect of velocity and vorticity on stratified mixture formation in the visualization engine. In order to investigate spray behavior, the pray velocity is obtained through the cross-correlation PIV method, a useful optical diagnostics technology and the vorticity calculated from the spray velocity component. These results elucidated the relationship between vorticity and entropy, which play an important role in the diffusion process for the early injection case and the stratification process for the late injection case. In addition, we quantified the homogeneous diffusion ate of spray using entropy analysis based on Boltzmann's statistical thermodynamics. Using these methods, we discovered that the homogeneous mixture distribution is more effective as a momentum dissipation of surrounding air than that of the spray concentration with a change in the injection timing. We found that the homogenous diffusion rate increased as the injection timing moved to the early intake stroke process, and BTDC $60^{\circ}$ was the most efficient injection timing for the stratified mixture formation during the compression stroke.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2635-2649
• /
• 2022

CEFR is a small core-size sodium-cooled fast reactor (SFR) using high enrichment fuel with stainless-steel reflectors, which brings a significant challenge to the deterministic methodologies due to the strong spectral effect. The neutronic simulation of the start-up experiments conducted at the CEFR have been performed with a deterministic code system RAST-F, which is based on the two-step approach that couples a multi-group cross-section generation Monte-Carlo (MC) code and a multi-group nodal diffusion solver. The RAST-F results were compared against the measurement data. Moreover, the characteristic of neutron spectrum in the fuel rings, and adjacent reflectors was evaluated using different models for generation of accurate nuclear libraries. The numerical solution of RAST-F system was verified against the full core MC solution MCS at all control rods fully inserted and withdrawn states. A good agreement between RAST-F and MCS solutions was observed with less than 120 pcm discrepancies and 1.2% root-mean-square error in terms of k_eff and power distribution, respectively. Meanwhile, the RAST-F result agreed well with the experimental values within two-sigma of experimental uncertainty. The good agreement of these results indicating that RAST-F can be used to neutronic steady-state simulations for small core-size SFR, which was challenged to deterministic code system.

• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.635-646
• /
• 2012

This paper is concerned with an SIRS epidemic model with spatial diffusion and time delay representing the length of the immunity period. By using a new cross iteration scheme and Schauder's fixed point theorem, we reduce the existence of traveling wave solutions to the existence of a pair of upper-lower solutions. By constructing a newfashioned pair of upper-lower solutions, we derive the existence of a traveling wave solution connecting the uninfected steady state and the infected steady state.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
• /
• pp.159-162
• /
• 2006

In this paper energy distribution function in $SiH_4$ has been analysed over the E/N range 0.5${\sim}$300Td and Pressure value 0.5, 1.0, 2.5 Torr by a two-term approximation Boltzmann equation method and by a Monte Carlo simulation. The motion has been calculated to give swarm parameters for the electron drift velocity, diffusion coefficient, electron ionization, mean energy and the electron energy distribution function. The electron energy distribution function has been analysed in $SiH_4$ at E/N=30, 50Td for a case of the equilibrium region in the mean electron energy and respective set of electron collision cross sections. The results show that the deduced electron drift velocities, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients and mean energy agree reasonably well with theoretical for a rang of E/N values.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1996년도 추계학술발표회논문집
• /
• pp.134-139
• /
• 1996

The electron energy distributions function were analysed in sulphur hexaflouride at E/N : 500~800(Td) for a case of non-equilibrium ion in the mean electron energy. This paper describes the electron transport characteristics in SF$_{6}$ gas calculated for range of E/N values from 150~800(Td) by the Monte Carlo simulation and Boltzmann equation method using a set of electron collision cross sections determined by the authors and the values of electron swarm parameters. The results gained that the value of an electron swarm parameter such as the electron drift velocity, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients agree with the experimental and theoretical for a range of E/N. The properties of electron avalanches in an electron energy non-equilibrium region.n.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.241-244
• /
• 2002

The dependence of NiSi properties such as sheet resistance and cross-sectional profile on the dopants was characterized. There was little difference of sheet resistance between various dopants such as As, p, BF2 and B just after R'n formation of NiSi. However, the NiSi properties showed strong dependence on the dopants when thermal treatment was applied after RTf formation. BFa .implanted silicon was the best stable property while As implanted one was the worst. The main reason of the excellence property of BF2 sample is believed to be the retardation of Ni diffusion by the F. Therefore, retardation of Ni diffusion is very desirable fur high performance NiSi technology.