• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.122-128
• /
• 2006

In this paper, frosting experiments were conducted with variations of frosting parameters in order to obtain the correlations of frost properties. As a result, the local thickness, density, and surface temperature of the frost layer were presented. The dimensionless correlations for the frost thickness, frost density, frost surface temperature and heat transfer coefficient were derived as functions of dimensionless frosting parameters by using a dimensional analysis.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.34-44
• /
• 1994

In this paper, an iterative inversion method in angular spectral domain is presented for microwave imaging of a perfectly conducting cylinder. Angular spectra are calculated from measured far-field scattered fields. And then both the propagating modes and the evanescent modes are defined. The center and initial shape of an unknown conductor may be obtained by the characteristics of angular spectra and the total scattering cross section (TSCS). Finally, the orignal shape is reconstructed by the modified Newton algorithm. By using well estimated initial shape the local minima can be avoided, which might appear when the nonlinear equation is solved with Newton algorithm. It is shown to be robust to noise in scattered fields via numerical examples by keeping only the propagating modes and filtering out the evanescent modes.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.81-87
• /
• 2003

Triangulation method, conoscopic holography method and interferometry method are analyzed for effective measurement of micro burr geometry, which is formed in micro drilling. To select proper sensor, the cross section of a cylinder with 0.5mm diameter is measured and the result shows that conoscopic holography method is effective for measuring highly inclined surface in cylinder. Burrs with 1.0mm and 30${\mu}{\textrm}{m}$ height are measured by three suggested methods. As a result, the conoscopic holography method is proved to be most proper in measuring burr geometry. Burr measurement system is developed, which consists of conoscopic laser sensor, X-Y table, controller and burr measurement program. Burrs can be measured automatically and the result is displayed in 3D shape

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.1-9
• /
• 1998

In this paper, an incoherent imaging of a high-contrast cylindrical cavity in a lossy medium illuminated by the time-harmonic cylindrical wave is obtained via the backprojections of the intensity patterns of the forward total electric field in the cross-borehole measurement configuration. The phenomenon that the interference fringes in the intensity pattern, which are caused by the superposition of the incident field and the scattered field with different optical paths, are removed in the backprojection process is interpreted numerically. This imaging method is validated by imaging an air circular cylinder in a lossy medium of $\varepsilon$$_{r}$=9 and $\sigma$ = 0.0005, 0.002 S/m, and the conditions for obtaining better images are investigated.d.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.82-93
• /
• 2008

The flowfield behind two cylinders and flow-induced noise generated from the cylinders in various arrangement are numerically investigated based on the finite difference lattice Boltzmann model with 21 velocity bits. which is introduced a flexible specific heat ${\gamma}$ to simulate diatomic gases like air. In an isolated cylinder with two type of mesh. some flow parameters such as Strouhal number $S_t$ and acoustic pressure ${\Delta}p$ simulated from the solution are given and quantitatively compared with those provided the previous works. The effects of the center-to-center pitch ratio $L_{cc}/d=2.0$ in staggered circular cylinders as shown in Fig. 1 and angles of incidence ${\alpha}=30^{\circ}(T_{cc}/d=0.5)$, $45^{\circ}(T_{cc}/d =0.707)$ and $60^{\circ}\;(T_{cc}/d=0.866)$, respectively, are studied. Our analysis focuses on the small-scale instabilities of vortex shedding, which occurs in staggered arrangement. With the results of drag $C_d$ and lift $C_l$ coefficients and vorticity contours. the mechanisms of the interference phenomenon and its interaction with the two-dimensional vortical structures are present in the flowfields under $Re\;{\le}\;200$. The results show that we successively capture very small pressure fluctuations, with the same frequency of vortex shedding, much smaller than the whole pressure fluctuation around pairs of circular cylinders. The upstream cylinder behaves like an isolated single cylinder, while the downstream one experiences wake-induced flutter. It is expected that, therefore, the relative position of the downstream cylinder has significant effects on the flow-induce noise, hydrodynamic force and vortex shedding characteristics of the cylinders.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.235-236
• /
• 2005

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.635-636
• /
• 2005

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.78-85
• /
• 2006

Flows around two oscillating cylinders in side-by-side arrangement at Re=185 are simulated using immersed boundary method. The cylinders oscillate vertically with prescribed sinusoidal function in opposite directions in uniform cross-flow. Flow patterns and drag & lift forces are described by varying distance between two cylinders and oscillating frequency. Time series of flow patterns are investigated along with corresponding drag k lift coefficients.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.267-272
• /
• 2003

This paper describes design method of Passive-type Radar Reflector (PRR) which is to provide the requirement of newly revised 2000 SOLAS regulations on the Radar Reflector. The main target of this work is to find the optimum shape of a radar target having large Radar Cross Section (RCS). Through the RCS analysis based on the theoretical approach, two kinds of PRR models, RRR-F model for use in fisheries and PRR-S model for use in small sized ship, are designed and discussed their RCS performance. RCS measurement tests for the various sized samples are carried out in an anechoic chamber. As evaluation results it was clearly shown that the conventional sphere-type shows optimum shape in case of PRR-S, while the cylinder-type which consists of large sized corner clusters or zig-zag flat plats gives best performance in case of PRR-F.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.639-642
• /
• 1999

Pullout test known as Lok test among the test methods to evaluate concrete strength strength is a test method which is used to decide the form removal time by assessing the early strength of concrete in a new construction, or to control the quality of newly placed concrete. This method has inconvenience to place inserts on the form work in advance, however, the placing work is quite simple and it has advantage that the strength can be measured at field as long as the inserts are placed. In this study, the first step is to investigate the properties of test method itself, by performing the laboratory test which covers deviation of the method and factors affecting the results, etc. The second step is to correlate the result with cylinder strength and other NDT methods such as rebound hammer, ultrasonic method, etc. And that, the results are compared with foreign results to find the differences between the two. In this research, new factors such as moisture content, area of aggregate failure cross section and area of aggregate separation cross section, etc as well as wate-cement ratio and age are investigated.