• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.96-101
• /
• 2005

A theory for the material transports through ion exchange membrane has been developed on the basis of nonequilibrium thermodynamics by removing the assumption of solvent flow in the previous paper and applied to a detailed study of the ionic transport properties of new charged mosaic membrane(CMM) system. The CMM having two different fixed charges in the polymer membrane indicated unique selective transport behavior then ion-exchange membrane. The separation behavior of ion transport across the CMM with a parallel array of positive and negative functional charges were investigated. It was well-known the analysis of the volume flux and solute flux based on nonequilibrium thermodynamics. Our suggests preferential salt transport across the charged mosaic membranes. Transport properties of heavy metal ions, $Mg^{2+}$, $Mn^{2+}$and sucrose system across the charged mosaic membrane were estimated. As a result, we were known metal salts transport depended largely on the CMM. The reflection coefficient indicated the negative value that suggested preferential material transport and was independent of charged mosaic membrane thickness.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.193-201
• /
• 2007

The present paper deals with the application of the explicit finite element code, PAM-CRASH, to simulate the crash behavior of steel thin-walled tubes with various cross-sections subjected to axial loading. An isotropic elastic, linear strain-hardening material model was used in the finite element analysis and the strain-rate sensitivity of mild steel was modeled by using the Cowper-Symonds constitutive equation with modified coefficients. The modified coefficients were applied in numerical collapse simulations of 11 types of thin-walled polygon tubes: 7 convex polygon tubes and 4 concave polygon tubes. The results show that the thin hexagonal tube and the thick octagonal tube showed relatively good performance within the convex polygon tubes. The crush strengths of the hexagonal and octagonal tubes increased by about 20% and 25% from the crush strength of the square tube, respectively. Among the concave tubes, the I-type tube showed the best performance. Its crush strength was about 50% higher than the crush strength of the square tube.

• Journal of Radiation Protection and Research
• /
• 제22권1호
• /
• pp.47-58
• /
• 1997

MCNP4A 코드를 이용하여 MIRD 인형팬텀의 정면과 후방에서 입사하는 넓고 평행한 감마선빔에 대한 단위 공기커마당 유효선량 환산계수와 단위 플르언스당 장기의 등가선량을 계산하였다. 본 연구에서 고려한 감마선은 0.03-10 MeV 에너지 구간에서 20개의 단일에너지에 대해 수행되었다. 환산계수의 계산결과를 ICRP/ICRU의 연구결과 발표예정 출판물에 주어진 해당되는 값과 비교한 결과 편차 10%이내에서 일치하고 있다. 결과의 차이가 발생한 이유는 MIRD 팬텀과 ADAM/EVE 팬텀의 기하학적 차이가 주원인이며 또한 계산에 사용된 전산코드와 단면적 차이 등으로 판단된다. 특정 식도 모델을 사용한 결과로부터 얻어진 유효선량과 흉선과 췌장에 대한 등가선량을 채택함으로써 얻어지는 유효선량은 약간(최고 5%)의 차이를 보인다. 기타장기로부터 상부대장을 제외했을 때 본 연구에서 다루었던 감마선 선량학적 측면의 경우에서는 중요하지 않은 것으로 나타났다.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.319-324
• /
• 2005

An integrated approach for prostate cancer detection using proteomic data is presented. Due to the high-dimensional feature of proteomic data, the discrete wavelet transform (DWT) is used in the first-stage for data reduction as well as noise removal. After the process of DWT, the dimensionality is reduced from 43,556 to 1,599. Thus, each sample of proteomic data can be represented by 1599 wavelet coefficients. In the second stage, a voting method is used to select a common set of wavelet coefficients for all samples together. This produces a 987-dimension subspace of wavelet coefficients. In the third stage, the Autoassociator algorithm reduces the dimensionality from 987 to 400. Finally, the artificial neural network (ANN) is applied on the 400-dimension space for prostate cancer detection. The integrated approach is examined on 9 categories of 2-class experiments, and also 3- and 4-class experiments. All of the experiments were run 10 times of ten-fold cross-validation (i. e. 10 partitions with 100 runs). For 9 categories of 2-class experiments, the average testing accuracies are between 81% and 96%, and the average testing accuracies of 3- and 4-way classifications are 85% and 84%, respectively. The integrated approach achieves exciting results for the early detection and diagnosis of prostate cancer.

• 대한한방내과학회지
• /
• 제21권3호
• /
• pp.495-504
• /
• 2000

Objective : To assess the relationship and prevalence rate among hypertension, dyslipidemia and the four commenest anthropometric measurements for obesity(body mass index(BMI), waist-hip ratio(WHR), waist circumference(WC) and body fat) in Korean adults. Methods : We studied the cross-sectional association of the anthropometric indicies and hypertension, dyslipidemia in 70 Korean adults. Hypertension was defined as blood pressure ${\ge}160/95$mmHg and classification of JNC IV, Dyslipidemia were defined as total cholesterol ${\ge}200$ mg/dl, HDL-cholesterol ${le}35$ mg/dl, LDL-cholesterol ${\ge}160$ mg/dl, triglyceride ${\ge}200$ mg/dl. Infromations on life-style factors were obtained from personal interview. Results : BMI and WHR, BMI and WC, BMI and Fat(%), WHR and WC, WC and Fat(%) had high partial correlation coefficients after age adjustment. BMI and Systolic Blood Pressure had r=0.385 coefficients, WHR and HDL-cholesterol had r=-0.360 coefficients. All four anthropomtric indicies and hypertenstion groups by JNC IV classsification had signifiant differences in women, but only fat(%) and hypertension had significant difference in men. In women, in the relationship of four anthropomtric indicies and serum lipids, total cholesterol ${\ge}200$ mg/dl group with fat(%) had a signifiant difference for normal cholesterol group, and also the group of HDL-cholesterol ${\le}$ mg/dl with WC had significance. But in men, there were no significant differences in all anthropomtric indicies and serum lipids groups. Conclusions : Korean women are more significant than Korean men in the relationship between anthropometric indicies and serum lipids, or blood pressure. But this study's samples are small, so the results are some different with results of other studies. We should study more specifically about anthropometric indicies and serum lipids, anthropometric indicies and blood pressure with many samples.

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.29-38
• /
• 2007

This study was undertaken to investigate the variation of equilibrium moisture content (EMC) in transverse direction and three different directional (longitudinal, radial, and tangential) linear movements, and diffusion coefficients within a tree disc of Korean red pine (pinus densiflora). The EMC gradually increased in heartwood from pith. Therefore, the chemical components might differ even in heartwood and the radial variation in EMC might have a close relationship with the cellulose content within a cross section. The specific gravity increases gradually from pith and the porosity has not direct influence on the variation of EMC within a tree disk. Both the radial and tangential diffusion coefficients exhibited clear trend of increase from pith. The EMC change (${\Delta}EMC$) and tangential diffusion coefficient were close to be axisymmetrical but others were deviated from axisymmetry. The diffusion coefficient decreases with decreasing an activation energy and specific gravity, The diffusion coefficient increased with increasing ${\Delta}EMC$ and hygroscopicity of wood might be inversely proportional to the activation energy, The fJEMC may depend on the chemical constituents of cellulose, hemicellulose and lignin. As the number of sorption sites and sorption capacity of wood increase, therefore, it might be assumed that the hygroscopicity of wood increases while activation energy decreases. Modeling physico-mechanical behavior of wood, the variations should be considered to improve the accuracy.

• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.292-297
• /
• 2010

일본산 산공재 중 구조적 특징이 목재흡음에 적합하다고 사료되는 카기카즈라목재의 흡음성능과 구조적 특징을 관찰하고자 목재횡단방향으로 원반형시험편을 채취하여 구조적 특징을 관찰하고, 전달함수법으로 흡음율을 측정하였다. 측정주파수범위에서 카기카즈라 횡단면의 흡음율은 0.30에서 0.50의 수치를 나타내었다. 비교수종인 낙엽송시험편보다 2~3배 높은 흡음율을 나타내었으며, 특히 2~4 KHz의 주파수영역에서는 50% 전후로 높은 흡음율을 나타내었다. 카기카즈라목재의 횡단면에서는 다수의 커다란 도관이 존재하고 이들 도관요소들은 단일천공판으로 연결되어 다공질형흡음에 유용한 연속된 모세관이 다량 존재하는 사실을 확인할 수 있었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.217-220
• /
• 2006

The lift and drag forces produced by a wing of a given cross-sectional profile are dependent on the wing planform and the angle of attack. Aspect ratio is the ratio of the wing span to the average chord. For conventional fixed wing aircrafts, high aspect ratio wings produce a higher lift to drag ratio than low ones for flight at subsonic speeds. Therefore, high aspect ratio wings are used on aircraft intended for long endurance. However, birds and insects flap their wings to fly in the air and they can change their wing motions. Their wing motions are made up of translation and rotation. Therefore, we tested flapping motions with parameters which affect rotational motion such as the angle of attack and the wing beat frequency. The half elliptic shaped wings were designed with the variation of aspect ratio from 4 to 11. The flapping device was operated in the water to reduce the wing beat frequency according to Reynolds similarity. In this study, the aerodynamic forces, the time-averaged force coefficients and the lift to drag ratio were measured at Reynolds number 15,000 to explore the aerodynamic characteristics with the variation of aspect ratio. The maximum lift coefficient was turned up at AR=8. The mean drag coefficients were almost same values at angle of attack from $10^{\circ}$ to $40^{\circ}$ regardless of aspect ratio, and the mean drag coefficients above angle of attack $50^{\circ}$ were decreased according to the increase of aspect ratio. For flapping motion the maximum mean lift to drag ratio appeared at AR=8.

• 한국유체기계학회 논문집
• /
• 제8권4호
• /
• pp.39-47
• /
• 2005

The present study has been performed to investigate the influences of rectangular fins on heat transfer in an impingement/effusion cooling system with crossflow. To simulate the impingement/effusion cooling system with initial crossflow, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of the hole diameter. The crossflow passes between the plates, and various rectangular fins are installed on the plates. Reynolds number based on the hole diameter is fixed to 10,000 and the flow rate of crossflow is changed from 0.5 to 1.5 times of that of the impinging jet. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. Also to analyze the flow characteristics, a numerical calculation is performed. When rectangular fins are installed, the flow and heat transfer pattern is changed greatly from the case without fins. In the injection hole region, the jet impinges on effusion plate without deflection and wall jet spreads symmetrically. In the effusion region, the crossflow accelerates due to the decrease of cross-sectional area in the channel. Local heat/mass transfer coefficients are enhanced significantly compared to the case without fins. As the blowing ratio increases, the effect of rectangular fins against the crossflow becomes more significant and then the higher average heat/mass transfer coefficients are obtained than the case without fins. However, the increase of blockage effect gives more pressure loss in the channel.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.289-296
• /
• 2004

The present study has been performed to investigate the influences of rectangular fins on heat transfer in an impingement/effusion cooling system with crossflow. To simulate the impingement/effusion cooling system with initial crossflow, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of the hole diameter. The crossflow passes between the plates, and various rectangular fins are installed on the plates. Reynolds number based on the hole diameter is fixed to 10,000 and the flow rate of crossflow is changed from 0.5 to 1.5 times of that of the impinging jet. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. Also to analyze the flow characteristics, a numerical calculation is performed. When rectangular fins are installed, the flow and heat transfer pattern is changed greatly from case without fins. In the injection hole region, the jet impinges on effusion plate without deflection and wall jet spreads symmetrically. In the effusion region, the crossflow accelerates due to the decrease of cross-sectional area in the channel. Local heat/mass transfer coefficients are enhanced significantly compared to case without fins. As the blowing ratio increases, the effect of fins against the crossflow becomes more significant and then the higher average heat/mass transfer coefficients are obtained than the case without fins.