• 지구물리
• /
• 제3권1호
• /
• pp.57-66
• /
• 2000

울산단층의 구조와 위치는 한반도 동남부의 지각 진화 해석에 중요한 역할을 한다. 울산단층을 피복하고 있는 충적층의 두께와 충적층 하부의 단층 수반 파쇄대를 조사하고 가능하다면 주단층의 정확한 위치를 파악하기 위하여 굴절법 탄성파탐사와 쌍극자 전기비저항탐사를 수행하고 분석하였으며, 이들 결과와 함께 이 지역에서 독립적으로 수행된 타연구의 반사법 탄성파탐사 결과를 도입하여 종합적인 해석을 하였다. 전기비저항탐사에서 동천 동쪽에서의 탐사선에서는 단층으로 사료되는 비저항 이상대가 발견되지 않았으나, 동천 서족 탐사선에는 잘 발달된 연속적인 낮은 비저항이상대를 발견하였다. 이는 울산단층의 주단층은 동천이나 동천 서쪽에 위치하는 것을 시사한다. 동천 동쪽 탐사선에서 실시한 굴절법 탄성파탐사에서는 기반암과 충적층의 경계 및 지하수면으로 사료되는 두 굴절면을 발견하였으며, 충적층의 두께는 약 30 m정도로 해석되었다. 결과해석의 신뢰도를 높이기 위하여 본 조사와 별도로 실시된 반사법 탄성파 자료를 참고한 결과 반사법 탄성파 탐사에서 발견된 많은 단층대가 굴절법탐사나 비저항탐사에서는 나타나지 않았다. 낮은 비저항 이상은 파쇄대를 따른 함수량의 영향보다는 점토의 영향에 밀접한 관련이 있는 것으로 가정할 때 고원인은 설명되나, 굴절법탐사나 비저항탐사의 해상도와 관련이 있을 수 있다. 정확한 원인구명을 위해서는 정밀한 연구가 필요하다. 일반적으로 전기비저항 탐사는 단층위치 파악에 유용한 지구물리학적 탐사법으로 알려져 있으나 본 조사에서는 반사법 탄성파 탐사에 비해 그 효과가 뚜렷하지 못하였다. 쌍극자 전기비저항탐사에서 해상도를 유지하면서 가탐심도를 증가시키기 위해서는 전개수를 늘려야 한다. 그러나 배경잡음 때문에 한계점을 가지는데, 본 조사에서 측정치의 통계학적 성질을 볼 때 조사지역에서의 측정치가 전개수 16까지는 충분한 의미를 가짐을 알 수 있었다.

• 한국전자파학회논문지
• /
• 제22권7호
• /
• pp.711-719
• /
• 2011

본 논문에서는 L-밴드 대역 레이더 후방 산란 측정용 도파관 직교 모드 변환기(orthomode transducer)의 소형화에 대한 설계 및 성능 분석 결과를 제시한다. 도파관 직교 모드 변환기는 테이퍼(taper) 구조를 기본으로 새롭게 설계된 접합 구조를 이용하여 별도의 테이퍼 구조 없이 표준 어댑터와 연결이 가능하도록 설계/제작되었다. 소형화된 L-밴드 직교 모드 변환기의 최대 길이는 약 1.2 ${\lambda}_o$(310 mm)이며, 이는 기존의 동급 직교 모드 변환기 크기의 약 60 % 수준이 된다. 또한, 직교 모드 변환기의 포트 정합 특성과 편파 격리도 특성을 높이기 위해서 두 개의 금속봉을 구조 내부에 삽입하여 운용 주파수 대역 내 420 MHz의 대역폭(반사 손실<-15 dB 이하)과 약 40 dB의 높은 편파 격리도 성능을 얻을 수 있었다. 제작된 직교 모드 변환기, 혼 안테나, 네트워크 분석기(Agilent사(社)8753E)로 구성된 L-밴드 scatterometer를 이용한 레이더 후방 산란 측정의 정확도 분석을 위해 STCT(Single Target Calibration Technique) 보정 기법과 2DTST(2D Target Scanning Technique) 자동 측정 기법을 이용하였다. 보정된 scatterometer를 이용하여 측정된 시험용 목표물(55 cm 삼각 수동 전파 반사기)의 RCS(Radar Cross Section)의 측정 오차는 수직/수평 편파 각각 -0.2 dB와 0.25 dB이며, 유효 편파 격리도는 대역 내 평균 약 35.8 dB이다. 이때, 성능 측정을 위해 직교 모드 변환기와 함께 사용된 혼 안테나는 길이 300 mm, 개구면 크기 $450{\times}450\;mm^2$이며, E-평면 $29.5^{\circ}$와 H-평면 $36.5^{\circ}$의 반전력 빔 폭(HPBW)을 갖는다.

• Journal of Nutrition and Health
• /
• 제49권3호
• /
• pp.179-188
• /
• 2016

본 연구는 광주광역시에 거주하는 결혼이주여성 92명을 대상으로 하여 사회경제적 특징과 건강, 식생활 실태를 조사하여 결혼이주 여성의 식생활과 이에 영향을 미치는 요인을 분석하기 위해 수행되었다. 본 조사에 응한 결혼이주여성의 평균 연령은 31.3세, 한국에서의 평균 거주기간은 5.5년이었으며, 출신국은 베트남 56%, 중국 26%, 필리핀 12%, 기타 국가 12% 등이었다. 가장 많이 앓고 있는 질병은 소화기계 질환, 빈혈, 신경계 질환 순이었고, 만성 성인병 유병률은 낮은 편이었다. 조사대상자의 체위를 살펴보면, 현재 평균 체중은 54 kg으로서, 한국으로 이주할 때 체중과 비교하면 평균 3.8 kg 증가하였으며, BMI $25kg/m^2$를 기준으로 비만한 조사대상자는 17%였다. 식품을 구입할 때 가장 중요하게 생각하는 것은 영양적 가치, 건강, 식품에 대한 기호도 순으로 건강에 관심이 높았으며, 식품에 대한 정보는 인터넷 37.0%, 가족 28.3%, TV 또는 라디오 27.2% 순으로 스마트폰 사용이 일반화되어 인터넷을 통한 정보습득이 가장 많았다. Mini dietary assessment로 판정한 식습관점수는 5점 만점 기준에 3.45이었으며, 유제품 섭취, 단백질 섭취, 규칙적 식사, 골고루 섭취하기 등에서 점수가 낮은 경향을 나타냈으나, 지방이 많은 음식이나 동물성 지방, 튀긴 음식, 당이나 탄산음료도 적게 섭취하였다. 조사대상자의 식습관 변화정도를 살펴보면, 한국으로 이주 후 식습관이 많이 변했다고 응답한 조사대상자는 33.7%였으며, 식습관 변화 내용으로는 식품섭취 증가와 관련되었으며, 특히 과일과 채소의 섭취가 증가하였다고 응답하였다. 조사대상자의 거주 기간이 BMI, 허리둘레와 유의적으로 양의 상관관계 있었으며, 거주 기간별로 비만, 질병 유병, 식습관 변화 정도를 살펴본 결과, 유의적인 차이는 없었으나, 거주기간이 5년 이상인 그룹이 5년 미만인 그룹에 비해 식습관이 많이 변하고 비만율이 증가하였으나 질병은 감소하는 경향을 나타냈다. 본 연구 결과에서는 거주기간과 질병 유병률이 역의 관계가 있는 것으로 보고되었으나, 이는 본 조사대상자의 한국 평균 거주기간이 비교적 짧아 한국 문화에 대한 적응단계가 이행단계와 관계되는 것으로 생각된다. 결혼이주 여성의 식생활 적응 및 바람직한 식습관 형성은 결혼이주 여성 뿐 만 아니라 이들이 속하고 책임지고 있는 다문화 가정의 건강에도 중요한 영향을 미칠 것으로 사료되어 결혼이주 여성에 대한 장기적이고 다양한 연구와 교육이 필요할 것이다.

• Toxicological Research
• /
• 제8권2호
• /
• pp.343-357
• /
• 1992

Tumor necrosis factor-${\alpha}$(TNF), a polypeptide hormone secreted primarily by activated macrophages, was originally identified on the basis of its ability to cause hemorrhagic necrosis and tumor regression in vivo. Subsequently, TNF has been shown to be an important component of the host responses to infection and cancer and may mediate the wasting syndrome known as cachexia. These systemic actions of TNF are reflected in its diverse effects on target cells in vitro. TNF initiates its diverse cellular actions by binding to specific cell surface receptors. Although TNF receptors have been identified on most of animal cells, regulation of these receptors and the mechanisms which transduce TNF receptor binding into cellular responses are not well understood. Therefore, in the present study, the mechanisms how TNF receptors are being regulated and how TNF receptor binding is being transduced into cellular responses were investigated in rat liver plasma membranes (PM) and ME-180 human cervical carcinoma cell lines. $^{125}I$-TNF bound to high ($K_d=1.51{\pm}0.35nM$)affinity receptors in rat liver PM. Solubilization of PM with 1% Triton X-100 increased both high affinity (from $0.33{\pm}0.04\;to\;1.67{\pm}0.05$ pmoles/mg protein) and low affinity (from $1.92{\pm}0.16\;to\;7.57{\pm}0.50$ pmoles/mg protein) TNF binding without affecting the affinities for TNF, suggesting the presence of a large latent pool of TNF receptors. Affinity labeling of receptors whether from PM or solubilized PM resulted in cross-linking of $^{125}I$-TNF into $M_r$ 130 kDa, 90 kDa and 66kDa complexes. Thus, the properties of the latent TNF receptors were similar to those initially accessible to TNF. To determine if exposure of latent receptors is regulated by TNF, $^{125}I$-TNF binding to control and TNF-pretreated membranes were assayed. Specific binding was increased by pretreatment with TNF (P<0.05), demonstrating that hepatic PM contains latent TNF receptors whose exposure is promoted by TNF. Homologous up-regulation of TNF receptors may, in part, be responsible for sustained hepatic responsiveness during chronic exposure to TNF. As a next step, the post-receptor events induced by TNF were examined. Although the signal transduction pathways for TNF have not been delineated clearly, the actions of many other hormones are mediated by the reversible phosphorylation of specific enzymes or target proteins. The present study demonstrated that TNF induces phosphorylation of 28 kDa protein (p28). Two dimensional soidum dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) resolved the 28kDa phosphoprotein into two isoforms having pIs of 6.2 and 6.1. The pIs and relative molecular weight of p28 were consistent with those of a previously characterized mRNA cap binding protein. mRNA cap binding proteins are a class of translation initiation factors that recognize the 7-methylguanosine cap structure found on the 5' end of eukaryotic mRNAs. In vitro, these proteins are defined by their specific elution from affinity columns composed of 7-methylguanosine 5'-triphosphate($m^7$GTP)-Sepharose. Affinity purification of mRNA cap binding proteins from control and TNF treated ME-180 cells proved that TNF rapidly stimulates phosphorylation of an mRNA cap binding protein. Phosphorylation occurred in several cell types that are important in vitro models of TNF action. The mRNA cap binding protein phosphorylated in response to TNF treatment was purifice, sequenced, and identified as the proto-oncogene product eukaryotic initiation factor-4E(eIF-4E). These data show that phosphorylation of a key component of the cellular translational machinery is a common early event in the diverse cellular actions of TNF.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.150-157
• /
• 2002

One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.

• 한국조리학회지
• /
• 제22권5호
• /
• pp.1-12
• /
• 2016

본 연구에서는 찐빵의 영양성과 품질을 향상시키기 위한 현미발효액, 현미 sourdough을 만든 후, 첨가량을 달리하여 찐빵을 제조한 다음 이화학적, 관능적 특성을 측정하였다. 반죽의 pH 및 적정산도를 측정한 결과는 현미 sourdough 첨가량에 따라 유의적으로 낮아지는 경향을 보였으며, 대조구의 적정산도는 시료간의 유의한 차이가 있었다. 발효시간에 따른 반죽의 부피는 대조구와 각 시료간의 유의적인 차이가 없었으며, 발효 15분에는 대조구에서 가장 크게 부피가 증가하였고, D시료에서 가장 낮은 부피를 보였다. 찐빵의 부피 및 비용적의 경우, B 시료에서 3.34로 가장 높았고, 각각의 시료에서 발효시간에 따른 유의한 차이를 보였다. 지름은 B 시료에서 88.11로 가장 높았고, D 시료에서 79.04로 가장 낮았으며, 시료간의 유의한 차이가 나타났다. 찐빵의 높이는 대조구에서 42.91로 가장 높았고, D 시료에서 41.87로 가장 낮았으며, 시료간의 유의한 차이를 보였다. 찐빵의 단면구조를 살펴본 결과, 부피와 비용적이 가장 높게 나타난 B 시료의 기공이 가장 크고 조직의 결이 일정하게 분포되어 있었다. L값은 대조구보다 첨가구에서 높은 경향을 보였고, a값은 현미 sourdough의 첨가량이 증가할수록 높게 나타났고, b값은 찐빵의 부피와 비용적이 클수록 낮게 나타나 L값과 유사한 경향을 보였다. 경도, 점착성, 씹힘성에서 D 시료에서 가장 높았고, B 시료에서 가장 낮았으며, 시료간의 유의한 차이가 나타났다. 전체적인 선호도를 측정한 결과, 향, 맛, 외형 및 질감에서 가장 높은 선호도를 나타낸 B 시료에서 가장 높았고, 맛, 외형 및 질감 등에서 가장 낮은 선호도를 나타낸 D 시료에서가장 낮았으며, 각 시료간의 유의한 차이를 보였다.

• Child Health Nursing Research
• /
• 제19권2호
• /
• pp.85-93
• /
• 2013

목적 본 연구의 목적은 Six Dimension Scale of Nursing Performance (Six-D Scale)와 간호학생 스트레스 평가지수 (SNSI)의 한국어 버전 개발 과정을 기술하고, 천식 및 1형 당뇨 모듈을 내용으로 한 시뮬레이션 기반 객관구조화시험(OSCE)을 이용하여 신뢰도 및 타당도를 평가하기 위함이다. 방법 본 연구는 단편적 서술연구이며, 4년제 간호학과 4학년 학생 51명을 대상으로 수행되었다. 도구의 신뢰도는 Chronbach's 를 이용한 내적 일관성을 평가하였고, OSCE는 검사자간 신뢰도를 계산하였다. 타당도 평가는 Six-D Scale과 SNSI의 하부영역을 OSCE, 평점 및 자아효능감과의 상관관계를 분석함으로써 구성타당도로 확인하였다. 결과 두 도구의 Chronbach's ${\alpha}$는 .82-.95였고, OSCE의 검사자 간 신뢰도는 .75 (천식)-.87 (당뇨)이었다. Six-D Scale은 OSCE (r=.109-.272) 및 자아효능감과(r=.005-.161)는 양의 상관관계를, 평점과는 음의 상관관계를(r= -.246 ~ -.394) 보였으나, 통계적으로 유의하지는 않았다. SNSI는 OSCE (r= -.007 ~ -.238), 평점(r=-.092 ~ -.426) 및 자아효능감(r=-.246 ~ -.394) 모두와 음의 상관관계를 나타냈으며, OSCE를 제외하고는 모두 통계적으로 유의하였다. 결론 본 연구의 결과 간호수행능력의 Six-D Scale, SNSI 모두 적절한 신뢰도를 보였다. 타당도 검증 결과, 간호학생스트레스 도구는 적절한 타당도를 나타내었으나, Six-D scale은 적용에 신중을 기해야 하는 것으로 판단되었다. 따라서 자가 보고형 임상수행능력 평가는 좀 더 다양한 학생들을 대상으로 타당도 검증이 더욱 깊이 있게 평가되어야 할 것이며, 간호학생의 스트레스는 학생들의 임상수행능력에 영향을 미치는 주요한 변수로 간주되어 연구 및 교육에 적극 고려되어야 할 것이다.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• 한국보건간호학회지
• /
• 제8권2호
• /
• pp.101-113
• /
• 1994

Maternity means all the women who are capable to conceive. In the aspect of health and medical care. however. it means the women who are now in pregnancy or have already given birth to a baby or are in a period of being recoverd from physiological changes occurred by pregnancy. According to the rapidly changing social structure. both the Quality and Quantity of the capacity of childbirth experienced by women are changing. Our society. having established a great economical growth by virtue of the highly developing and growing industrialization and urbanization. stimulates the women's advance into society and thereby increasing the number of employed women. When the women's participation in society is increased. their age of marriage is also affected. Which means there are a decrease of the capacity of childbirth in terms of quantity and a trend for women to have less children and to deliver a baby in their old age in terms of quality. On the contrary. since the number of multipara who want to have a baby in their old age is increasing. as a counter functional effect to the political project of decrease of a birth rate. concern has been focussed on childbirth in old age in the present study. And also such kind of the childbirth may be danger to the health of both mother and baby. Therefore the present study intended to provide some basic data of health education in the part of the health management of both mother and baby in the general hospital. based on understanding the realities of childbirth in. old age and things related to them. To achieve such a purpose of the present study. an analytical study by means of SPSS. was done using the data of 269 clinical records on both the newborn .babies and their mothers who had been supported by public general hospitals located in Seoul for 3 years from Jan. 1. 1991 to Dec. 31. 1993. Some significant results from the analytic study are as follows: 1. It appeared that the average age of normal. natural delivery was 33.8 years old and the average age of delivery through the cesarean operation was 35.4 years old. 2. It appeared that danger factors to childbirth women were types of the delivery and placental extrusion and danger factors to newborn babies are not so outstanding. 3. It appeared that the variables of the childbirth capacity which showed a significant difference according to each age group of women were the number of pregnancy. number of still birth, and number of existing children. That is. the age group of 'more than 35 years' had more frequency of experience In all 3 variables than the age group of 'less than 35 years'. 4. It appeared that the variables of the childbrith capacity which showed a significant difference a according to the sex of a newborn baby were number of pregnancy, number of still birth, and number of existing children. That is, the age group of 'more than 35 years' had more frequency of experience in all 3 variables than the age group of 'less than 35 years'. 5. It appeared that the health index of newborn babies which showed a significant difference was only 5 minute APGAR. That is, the health index 9.46 in the age group of 'more than 35 years' was less than an index of 9.72 in the age group of 'less than 35 years'. 6. Since a counter correlation of -0.10, as Pearson Correlation Coefficient, was showed between the age of childbirth mothers and the weight of newborn babies, it indicated that the higher age of childbirth woman, the lesser the weight of newborn baby. 7. It appeared that the number of women who had confirmed the sex of their baby before their delivery were 45 women, $67.2\%$ of total 67 women who had delivered a baby. and the expected sex by women in childbed was male with $73.1\%$ of total childbirth women expecting male birth and with their expression of feeling of female delivery. very regretful' by $39.3\%$ of total childbirth women. The results as shown above may indicate that instead of the possibility of danger to both the mother delivering a baby in old age and the baby delivered, the expectation of getting a son motivates childbirth in old age. As a conclusion, in a dimension of general hospital as well as national reform. it is required that a program of health education for childbirth in late maternal age have to be developed in the part of the health management of both mother and baby in the near future.