• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.141-154
• /
• 2018

In this study, the bend-buckling strength of the web in longitudinally stiffened plate girder was numerically investigated. The buckling strength of the reinforced web was evaluated through an eigenvalue analysis of the hypothetical model, in which the top and bottom junctions of the web to the flanges were assumed as simple support conditions. Major parameters in the analysis include asymmetrical cross-sectional property, aspect ratio of the web, stiffener locations, and bending rigidity of the stiffeners. The numerical results showed that current AASHTO LRFD specifications (2014) provides the buckling strength from considerably safe side to slightly unsafe side depending on the location of the stiffeners. A modified equation for buckling coefficients was proposed to solve the shortcomings. The bending rigidity requirements of longitudinal stiffeners stipulated in AASHTO were also investigated. It is desirable to increase the rigidity of the stiffeners when the aspect ratio is less than 1.0.

• 한국항공우주학회지
• /
• 제36권7호
• /
• pp.642-650
• /
• 2008

고분자 전해질 연료전지 스택의 성능향상과 안전성 확보를 위하여 스택의 체결하중으로 인한 가스켓과 GDL의 구조적 거동을 살펴보았다. 가스켓 구조 해석의 경우 하중과 변위의 초탄성 거동을 표현하기 위하여 Mooney-Rivlin의 변형률에너지 함수를 사용하였으며, 재료물성을 구하기 위하여 단축 인장 및 등가 이축 인장 시험을 수행하였고 유한요소 해석과 비교하였다. GDL의 물성측정을 위하여 압축 하중의 변화에 따라 두께변화를 측정하였고 단위 셀을 제작하여 하중의 변화에 따른 채널의 압력차를 측정하였다. 실험 데이터를 바탕으로 채널 단면적의 변화를 계산, 유한요소 해석결과와 비교하였다.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.95-102
• /
• 2005

Sodium cellulose carbonate (CC-Na) dissolved in $8.5\;wt\%$ NaOH/ZnO (100/2-3, w/w) aqueous solution was spun into some acidic coagulant systems. Diameter of regenerated cellulose fibers obtained was in the range of $15-50\;{\mu}m$. Serrated or circular cross sectional views were obtained by controlling salt concentration or acidity in the acid/salt/water coagulant systems. Velocity ratio of take-up to spinning was controlled up to 4/1 with increasing spinning velocity from 5 to 40 m/min. Skin structure of was developed at lower acidity or higher concentration of coagulants. Fineness, tenacity and elongation of the regenerated cellulose fibers were in the range of 1.5-27 denier, 1.2-2.2 g/d, and $8-11.3\;\%$, respectively. All of CC-Na and cellulose fibers spun from CC-Na exhibited cellulose II crystalline structure. Crystallinity index was increased with increasing take-up speed.

• Journal of the Korean Wood Science and Technology
• /
• 제37권3호
• /
• pp.231-238
• /
• 2009

우리나라에서 전통주택(한옥) 및 목조건축 문화재의 구조부재로 많이 이용되는 소나무는 천연건조가 일반적이어서 건조에 많은 시간이 소요되고 건조가 불충분하면 수축에 의한 갈라짐 및 변형 등의 결함을 일으킬 수 있다. 소나무 소시험편과 대단면 시험편을 제작하여 함수율상태에 따른 수축률변화를 검토하였다. 특정 함수율 상태에서의 체적수축률을 예측할 경우, 생재상태에서 기건상태, 기건상태에서 전건상태까지의 구간으로 나누어 적용하는 것이 정밀도가 높았다. 변재의 체적수축률은 단면크기에는 상관성이 없으며, 심재는 단면이 커질수록 체적수축률이 감소하는 것으로 나타났다.

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.73-81
• /
• 1992

We have investigated the thermal reaction property and the oxygen behavior of TiN/Ti/Si structure after different hear treatments using x-ray photoelectron spectroscopy and cross-sectional transmission electron microscopy measurements. During the heat treatment in N$_2$ amibient, the considerable amount of oxygen atoms incorporates into TiN/Ti/Si Structures. It is found that oxygen atoms pile up at the top surface of TiN and TiN/Ti interface, forming a compound of TiO$_2$ above $600^{\circ}C$. Inside the TiN film, the oxygen content increases as the annealing temperature increases, mostly TiO and Ti$_2$O$_3$ rather than thermodynamically stable TiO$_2$. Above the annealing temperature of 55$0^{\circ}C$, the TiSi$_2$ formation has initiated. One thing to note is that a severe blistering is observed in the sample annealed at $600^{\circ}C$, due to (1) the difference of thermal expansion coefficient between TiN and Si` (2) the compressive stress induced by the volume reduction caused by the Ti-Silicide grain while elevating temperatures.

• 한국표면공학회지
• /
• 제29권2호
• /
• pp.81-92
• /
• 1996

The cementless fixation of bone ingrowth by porous coatings on artificial hip joint prostheses are replacing polymethylmethacrylate(PMMA) bone cement fixations. However, the major interests in the field of porous metal coating are environmental corrosivity accelerated by metal ion release, deterioration in the mechanical property of the coating, and the mechanical failure of the coatings as well as the substrate. Therefore, the selection of right materials for coatings and the development of porous coating techniques must be accomplished. Because of the existing problems in Ti and Ti alloys which are used extensively, this study is focused on the plasma spraying technique for coating on super stainless steel substrate. In order to determine the optimum conditions which satisfy the requirement for the porous coatings, under the plasma spraying, we selected the experimental parameters which extensively influenced on the characteristics of the coating through the pre-examination. Spray distance has been selected among 120, 160, and 200mm and primary gas flow rate among 70, 100, and 130 SCFH. Current and secondary gas($H_2$) flow rate was fixed at 400A, and 15 SCFH respectively. To understand the characteristics of the coatings, surface morphology, cross-sectional micro-structure, surface roughness, residual stress, and corrosion resistance were elucidated and the best conditions for the bone ingrowth improvement on artificial hip joint prostheses were found.

• 열처리공학회지
• /
• 제35권3호
• /
• pp.139-149
• /
• 2022

In the automobile and shipbuilding industries, various materials and components require superior surface strength, excellent wear resistance and good resistance to repeated loads. To improve the surface properties of the materials, various surface heat treatment methods are used, which include carburizing, nitriding, and so on. Among them, carburizing treatment is widely used for structural steels containing carbon. The effective carburizing thickness required for materials depends on the service environment and the size of the components. In general, however, there is a limit in evaluation of the surface properties with a standardized mechanical test method because the thickness or cross-sectional area of the carburized layer is limited. In this regard, the nanoindentation technique has lots of advantages, which can measure the mechanical properties of the material surface at the nano and micro scale. It is possible to understand the relationship between the microstructural change in the hardened layer by carburizing treatment and the mechanical properties. To be spread to practical applications at the industrial level, in this paper, the principle of the nanoindentation method is described with a representative application for analyzing the mechanical properties of the carburized material.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.28-33
• /
• 2022

A pipe is a hollow, long-form part that is primarily used to transport fluids, such as liquids or gases. Pipes are used in a range of applications in different fields from mechanical purposes to architecture and electrical uses. Despite the significance owing to various usability of pipes, few studies have been conducted using the physical property test method. The tensile test is widely used as a method to check the physical properties of the pipe. The existing pipe tension test contains the possibility to cause errors, which are fractures outside the gauge distance and cross-sectional deformation of the pipe. In this study, a novel pipe tension test method using a jig is presented and pipes with various materials are tested. It is expected that the proposed method can reduce errors that occur in conventional pipes and also obtain more accurate values to enable more efficient testing.

• 한국정보시스템학회지:정보시스템연구
• /
• 제23권4호
• /
• pp.197-219
• /
• 2014

Despite of continuous efforts to crack down on piracy using penalties and regulations, this unauthorized piracy market is still enormous. Since the moral hazard about this phenomenon is pervasive and continually upsets the major intellectual property markets, an alternative plan is required. The purpose of this study is to provide an objective insight for factors that affect people's digital video piracy behavior. The following two research propositions were the focus: what psychological factors affect piracy behavior and how are these factors related to one another? In order to accomplish the research aims, we reviewed literatures on the current state of piracy in South Korea, characteristics of digital contents, studies on criminal psychology and behavioral theories. Previous research in the fields of criminal theory indicated that neutralization, a form of rationalization, would help explain digital piracy intentions. Thus, this study developed a model that explains effects of neutralization techniques and tested the possibility of an integrated model with other behavioral theory such as TPB and TIB. Empirical results of the study(368 sample collected) showed that all the factors in TPB including Attitude to Piracy(+), Subjective Norm(-), Perceived Behavioral Control(+) had a significant impact on Piracy Intention. Moreover, two neutralization techniques, Condemn the Condemners(+) and Appeal to Higher Loyalties(+), had a significant effect on Piracy Intention. In addition, Past Behavior had strong impacts on Attitude(+), Perceived Behavioral Control(+) and Piracy Intention(+). In terms of Expected Profit, it had an impact on Attitude to Piracy positively. These findings suggest implications for protecting the current intellectual property markets, with many stakeholders in movies and media industries. There are some limitations as followed: first, the study did not consider other neutralization techniques, low level of deterrence and the other expected results despite the possibility of their effects. Second, the study needs improvements through longitudinal research because the cross-sectional research could not rule out the alternative explanations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.198-201
• /
• 2002

In this paper, the dependence of Ni-silicide properties such as sheet resistance and cross-sectional profile on the dopants have been characterized. There was little dependence of sheet resistance on the used dopants such as As, P, $BF_{2}$ and $B_{11}$ just after RTP (Rapid Thermal Process). However, the silicide properties showed strong dependence on the dopants when thermal treatment was applied after formation of Ni-silicide. $BF_{2}$ implanted sample shows the best stable property, while $B_{11}$ implanted one was thermally unstable. The main reason of the excellent property of $BF_{2}$ sample is believed to be the retardation of Ni diffusion by the flourine.