• 전자공학회논문지
• /
• 제50권12호
• /
• pp.56-62
• /
• 2013

우리는 MOSFET Layout 단계에서 Multiplier 구성을 통한 Common centroid layout 방식을 사용한 무선 전력 전송 용 CMOS 정류회로를 제안한다. 제안하는 정류회로는 기존의 다이오드를 사용하지 않은 Cross-coupled MOSFET 정류회로로 13.56 MHz에서 동작한다. 전력 소모를 최소화하고, 높은 주파수까지 동작하기 위하여 Full bridge 정류회로에서 효율을 높이기 위한 비교기를 제거하였다. Layout 단계에서 Multiplier 구성을 통한 Common centroid layout 방식은 Chip-layout 상에서 MOSFER의 Finger에 의해 길어진 연결 선로에 존재하는 기생 직렬 저항과 병렬 Capacitor에 의해 발생하는 시간 지연을 줄이기 위해 고안되어, 천이 시간을 줄여 Cross-coupled 구조의 On-상태에서 Off-상태, 혹은 그 반대의 상태 변화를 빠르게 한다. 이는 빠른 상태 변화 시간으로 인해 전력 변환 효율을 증가시킨다. 본 정류회로는 $0.11{\mu}m$ CMOS 공정으로 제작되었으며, 전력 변환 효율은 최대 86.4%로 측정되었으며, 600 MHz 이상까지 높은 전력 변환 효율을 가지며, 이는 현재 발표된 것 중, Cross-coupled 구성을 기반으로 한 정류회로 중 가장 높은 성능을 가진다.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.476-482
• /
• 2009

This paper describes the development of capacitive sensor for the diagnosis of liquid dielectrics, which is widely used as the electrical insulating oil of transformer, circuit breaker, cable and etc. To survey the dielectric properties of the virgin and aged electrical insulating oils, we utilized the highly precise measuring system, using the principle of cross capacitance. The measured properties were used to determine the design factors of the sensor. Then the factors were optimized with the help of computational analysis. To evaluate diagnosis by the sensor, we performed accelerated thermal aging test about electrical insulating oils. The condition of aged specimens were investigated by measurements of relative permittivity i.e. capacitance change by capacitive sensor. And to evaluate the hysteresis characteristics with the change of temperature, we constructed a testing system, which was composed with vacuum drying oven, oil chamber and measuring instruments, such as LCR meter, MUX and so forth. Through the results of this investigation, we confirmed the superior characteristics of the newly developed sensor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.654-670
• /
• 2020

Workers at construction sites are easily exposed to many dangers and accidents involving falls, tripping, and missteps on stairs. However, researches on construction site monitoring system to prevent work-related injuries are still insufficient. The purpose of this study was to develop a wearable textile pressure insole sensor and examine its effectiveness in managing the real-time safety of construction workers. The sensor was designed based on the principles of parallel capacitance measurement using conductive textile and the monitoring system was developed by C# language. Three separate experiments were carried out for performance evaluation of the proposed sensor: (1) varying the distance between two capacitance plates to examine changes in capacitance charges, (2) repeatedly applying 1 N of pressure for 5,000 times to evaluate consistency, and (3) gradually increasing force by 1 N (from 1 N to 46 N) to test the linearity of the sensor value. Five subjects participated in our pilot test, which examined whether ascending and descending the stairs can be distinguished by our sensor and by weka assessment tool using k-NN algorithm. The 10-fold cross-validation method was used for analysis and the results of accuracy in identifying stair ascending and descending were 87.2% and 90.9%, respectively. By applying our sensor, the type of activity, weight-shifting patterns for balance control, and plantar pressure distribution for postural changes of the construction workers can be detected. The results of this study can be the basis for future sensor-based monitoring device development studies and fall prediction researches for construction workers.

• 전자공학회논문지SC
• /
• 제43권5호
• /
• pp.68-79
• /
• 2006

ECT는 측정된 커패시턴스 값을 이용하여 유전 물체의 유전율 분포를 가시화하기 위해 사용되는 비접촉 영상 복원 기술이다. 영상 복원시 수렴 속도 개선과 영상의 질 향상을 위해 다양한 반복적 영상 복원 방법들이 있으며, Landweber 방법은 널리 사용되고 있는 ECT의 영상 복원 방법 중 하나이다. 본 논문에서는 ECT 영상 복원에서 수렴 속도를 개선하기 위해 수정된 generalized Landweber 방법을 제안한다. 특히, Shaping 행렬을 가지는 generalized Landweber 방법에 가속항을 추가하고 최적화 계수를 해석적으로 결정한다. 다양한 컴퓨터 모의 실험을 통해 제안한 방법의 타당성을 입증한다.

• 한국전자파학회논문지
• /
• 제24권4호
• /
• pp.466-473
• /
• 2013

본 논문에서는 무선 충전에 사용할 수 있는 동축 단면의 도선을 이용한 소형 평판형 다중 루프 자기 공진 코일을 제시한다. 제안한 공진 코일은 높은 품질 계수를 갖고, 분포 커패시턴스를 조절하여 쉽게 공진 주파수를 제어할 수 있다. 공진 코일의 설계를 위해 제안한 공진 코일의 자기 인덕턴스 및 분포 커패시턴스 값을 이론적으로 계산하였다. 자기 인덕턴스는 단면 분할법을 사용하여 분할된 단면 사이의 상호 에너지의 합으로 계산할 수 있다. 검증을 위해, 특성 임피던스 $50{\Omega}$ 동축선으로 공진 코일을 제작하였다. 측정된 공진 주파수는 계산된 공진 주파수와 거의 일치하였고, 튜닝 파라미터 ${\gamma}$를 조절하여 원하는 공진 주파수로 조절할 수 있었다. 제작한 공진 코일을 태블릿 PC에 적용한 결과, 송 수전부 공진 코일의 품질 계수는 각각 282, 135를 가졌다. 공진 코일 사이의 간격이 4.4 cm인 경우, 송전부 공진 코일의 반경 5 cm 이내에서 80 % 이상의 전력 전송 효율을 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1565_1566
• /
• 2009

This paper presents the design and analysis of RF Front End for Wireless Heartbeat measurement System. In this work LNA, an inductor connected at the gate of the cascode transistor and capacitive cross-coupling are strategically combined to reduce the noise and the nonlinearity influences of the cascode transistors in a differential LNA. The Mixer is implemented by using the Gilbert-type configuration, cross pmos injection technique and the resonating technique for the tail capacitance. The resulting LNA achieves 1.26dB NF, better than 1.88dB NF Typical. Also Mixer resulting achieves 9.8dB at 100KHz.

• Journal of information and communication convergence engineering
• /
• 제13권3호
• /
• pp.172-179
• /
• 2015

Face-to-face (F2F) bonding in three-dimensional integrated circuits (3D ICs), compared with other bonding styles, is closer to commercialization because of its benefits in terms of density, yield, and cost. However, despite the benefits that F2F bonding expect to provide, it's physical nature has not been studied thoroughly. In this study, we, for the first time, extract cross-die (inter-die) parasitic elements from F2F bonds on the full-chip scale and compare them with the intra-die elements. This allows us to demonstrate the significant impact of field sharing across dies in F2F bonding on full-chip noise and critical path delay values. The baseline method used is the die-by-die method, where the parasitic elements of individual dies are extracted separately and the cross-die parasitic elements are ignored. Compared with this inaccurate method, which was the only method available until now, our first-of-its-kind holistic method corrects the delay error by 25.48% and the noise error by 175%.

• 반도체디스플레이기술학회지
• /
• 제9권4호
• /
• pp.1-5
• /
• 2010

The PVA (poly-vinyl alcohol) insulators were spun coated onto ITO coated glass substrates with the capacitors of Glass/ITO/PVA/Al structure. The effects of PVA concentrations (3.0, 4.0 and 5.0 wt%) on the morphology and electrical properties of the films were investigated. As the concentration of PVA increased from 3.0 to 5.0 wt%, the leakage current of device decreased from 17.1 to 0.23 pA. From the AFM measurement, the RMS value decreased with increasing PVA concentration, showing the improvement of insulator film roughness. The capacitances of the films with PVA concentrations of 4.0 and 5.0 wt% were about 28.1 and 24.2 nF, respectively. The lowest leakage current of 1.77 PA was obtained at the film thickness of 117.5 nm for the device with fixed PVA concentration of 5.0 wt%.

• Tribology and Lubricants
• /
• 제27권4호
• /
• pp.209-212
• /
• 2011

The capacitive application(prove) can be used to measure the complex permittivity of dielectric material of various thickness and cross section. This paper presents that we designed the analysis system of engine oil permittivity to know the relation between the engine oil deterioration and the prove dimension. Each of the dimension of capacitive prove is changed and then electric capacity is measured by LCR {Inductance(L), Capacitance (C), and Resistance (R)} meter. The engine oil permittivity has extracted in the prove measurement. As the additional research, this paper suggest the best of the prove dimension for the permittivity measurement.

• Transactions on Electrical and Electronic Materials
• /
• 제4권3호
• /
• pp.5-9
• /
• 2003

In this paper, a layout-based CMOS RF model for RFIC's including the capacitance effect, the skin effect, and the proximity effect between metal lines on the Si surface is proposed for the first time for accurately predicting the RF behavior of CMOS devices. With these RF effects, the RF equivalent circuit model based on the layout of the multi-finger gate transistor is presented. The capacitances between metal lines on the Si surface are modeled with the layout. And the skin effect is modeled to the equivalent ladder circuit of metal line. The proximity effect is modeled by adding the mutual inductance between cross-coupled inductances in the ladder circuit representation. Compared to the BSIM 3v3 and other models, the proposed RF model shows better agreements with the measured data and shows well the frequency dependent behavior of devices in GHz ranges.