• Design & Manufacturing
• /
• v.17 no.4
• /
• pp.63-71
• /
• 2023

In order to increase the extrusion production speed of aluminum, extrusion die cooling technology using liquid nitrogen has recently attracted a lot of attention. Increasing the extrusion speed increases the temperature of the bearing area of extrusion dies and the extrusion profile, which may cause defects on the surface of extruded profile. Extrusion die cooling technology is to directly inject liquid nitrogen through a cooling channel formed between the die and the backer inside the die-set. The liquid nitrogen removes heat from the die-set, and gaseous nitrogen at the exit of the channel, covers the extrusion profile of an inert atmosphere reducing the oxidation and the profile temperature. The aim of this study is to evaluate the cooling capacity by applying die cooling to extrusion of Al-Mn-based aluminum alloy flat tubes, and to investigate the effects of die cooling on the change in extrusion characteristics of flat tubes. Cooling capacity was confirmed by observing the temperature change of the extrusion profile depending on whether or not die cooling is applied. To observe changes in material characteristics due to die cooling, surface observation is conducted and microstructure and precipitate analysis are performed by FE-SEM on the surface and longitudinal cross section of the extruded flat tubes.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.300-304
• /
• 2018

'Bokha' is a new strawberry (Fragaria x ananassa Duch.) cultivar, which was released by the Highland Agriculture Research Institute in 2016. The 'Bokha' cultivar originated from a cross between 'Goha' and 'Saebong No. 3' that showed excellent ever-bearing characteristics, including continuous flowering habit and high soluble-solids contents under long-day and high temperature conditions in 2011. This cultivar was initially named 'Saebong No. 8' after examining its characteristics and productivity in summer culture from 2013 to 2015. After regional adaptability tests in 2016, 'Bokha' was selected from Saebong No. 8 as an elite cultivar. The general characteristics of 'Bokha' include semispreading type, elliptical leaves, and moderately vigorous growth. The fruits are conical in shape, and red in color. 'Bokha' plants have 32.7 leaves, 9.9 more than 'Goha' plants. The soluble-solids content of 'Bokha' was 9.2%, which was 0.2% higher than that of 'Goha'. The average fruit weight of 'Bokha' was about 9.5g and the marketable yield was $27,701kg{\cdot}ha^{-1}$, 72% higher than 'Goha'. 'Bokha' is suitable for tropical and subtropical zone cultivation as a high soluble solids contents cultivar, because it shows continuous flowering habit under long-day and high temperature conditions.

• Korean Journal of Plant Resources
• /
• v.37 no.1
• /
• pp.87-92
• /
• 2024

'Miha' is a new strawberry (Fragaria x ananassa Duch.) cultivar, which was released by the Highland Agriculture Research Institute in 2019. The 'Miha' cultivar originates from a 2014 cross between 'Monterey' and 'Saebong No. 3', both of which exhibited excellent ever-bearing characteristics, including continuous flowering and large fruits under long-day and high temperature conditions. This new cultivar was initially named 'Saebong No. 12' after examining its characteristics and productivity during summer cultivation between 2015 and 2019. After regional adaptability tests, 'Miha' was selected from 'Saebong No. 12' as an elite cultivar. The general characteristics of 'Miha' include intermediate, elliptic leaves, and strong growth. The fruits are conical and of a dark-red color. The number of leaves of 'Miha' was 21.9, which was 6.2 fewer than that of the control cultivar, 'Goha' with 28.1. The number of flower clusters of 'Miha' was similar to that of 'Goha'. The average fruit weight of 'Miha' was 13.4 g, which was 4.3 g heavier than that of 'Goha'. The fruit hardness of 'Miha' was 36.2 g·mm^-2, which was 10.1 g·mm^-2 harder than that of 'Goha'. The marketable yield of 'Miha' was 37,393 kg·ha^-1, 156% more than that of 'Goha' with 23,970 kg·ha^-1. Therefore, the new cultivar of ever-bearing strawberry 'Miha' is expected to be very popular in the export or bakery market because it is hard.

• Korean Journal of Plant Resources
• /
• v.37 no.4
• /
• pp.386-391
• /
• 2024

'Jinha' is a new strawberry (Fragaria × ananassa Duch.) cultivar, which was released by the Highland Agriculture Research Institute in 2019. The 'Jinha' cultivar originates from a 2011 cross between 'Albion' and 'Goha,' both of which exhibited excellent ever-bearing characteristics, including continuous flowering and large fruits under long-day and high temperature conditions. This new cultivar was initially named 'Saebong No. 11' after examining its characteristics and productivity during summer cultivation between 2012 and 2016. After regional adaptability tests, 'Jinha' was selected from 'Saebong No. 11' as an elite cultivar. The general characteristics of 'Jinha' include intermediate, elliptic leaves, and medium growth. The fruits are conical and of a red color. The plant height of 'Jinha' is simiar to that of the control variety, 'Flamenco', but it has a lot of number of leaves. The cluster length of 'Jinha' was 35.5 cm, 10.8 cm longer than 24.7 cm of the control variety. The number of flower clusters of 'Jinha' appeared 14.4, which was 4.1 more than that of 'Flamenco'. The average fruit weight of 'Jinha' was 10.1 g, which was 0.8 g heavier than that of 'Flamenco'. The soluble solid content of 'Jinha' was 10.2 °Brix, which was 2.0 °Brix higher than that of 'Flamenco'. The marketable yield of 'Jinha' was 25,931 kg·ha^-1, 440% more than that of 'Flamenco' with 5,900 kg·ha^-1. Therefore, the new cultivar of ever-bearing strawberry 'Jinha' is expected to be very popular in the export or bakery market because it is high soluble solid content and good shape.

• Economic and Environmental Geology
• /
• v.39 no.2 s.177
• /
• pp.163-171
• /
• 2006

This study is the case of groundwater development based on the geometrical fracture model of target area established only through geological fracture mapping technique. A fracture mapping of $9km^2$, eastern Munsan, has been conducted to determine geological and hydrological factors for new water well placement in the Gyeonggi gneiss complex. Geophysical exploration was not applicable because of small restricted area and dense underground utilities at the site. Form line mapping on the basis of foliation orientation and rock type revealed a synform of NS fold axis bearing to the south. An EW geological cross-section passed through the site area shows a F2 synform as a double-wall ice cream spoon shape. Three regional faults of $N20^{\circ}E,\;N30^{\circ}W$, and NS have been dragged into the site to help understand extensional fault paths. The $N20^{\circ}E$ fault with dextral sense is geometrically interpreted as a western fault of two flexural conjugate type-P shear faults in the F2 synformal fold. The NE cross-section reveals that a possible groundwater belt in the western limb of super-posed fold area is formed as a trigonal prism within 100 m depth of the intersectional space between the $N20^{\circ}E$ fault plane and the weakly sheared plane of transposed foliation. Another possible fault for water resource strikes $N40^{\circ}E$. Recommended sites for new water well placement are along the $N20^{\circ}E\;and\;N40^{\circ}E$ faults. As a result of fracture mapping, 145 ton/day of water can be produced at one well along the $N20^{\circ}E$ fault line. Exploration of groundwater in the area is succeeded only using with geological fracture mapping and interpretation of geological cross-section, without any geophysical survey. Intersection of fault generated with the F2 synformal fold and foliation supply space of groundwater reserver.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.76-83
• /
• 1984

This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.195-205
• /
• 2015

The rahmen bridge is well known common type of bridge in which all members are connected rigidly. The rahmen bridge is built for several situations because it has many advantages such as no need of bridge bearing system, easy of maintenance, reduction of the cross-sectional area of superstructure, and relatively low construction cost compared with other bridge types. Recently, to lengthen the span of rahmen bridge system, steel-concrete composite beam is used for superstructure of rahmen bridge instead of normal concrete girder with slab. However, member forces are increased because of extension of span length of superstructure and substructure is designed and constructed inefficiently when steel-concrete composite rahmen bridge is designed. In this study, new-type steel-concrete composite bridge is suggested. New-type steel-concrete composite rahmen bridge is adopted hinge connection between abutment and foundation for the reduction of the bending momemt at the foundation. In this study, we present the results of experiment conducted to estimate the load carrying capacity of new-type steel-concrete composite rahmen bridge and the structural characteristics of hinge connection.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.2
• /
• pp.115-135
• /
• 2011

Fe-Ti ore bodies and mafic granulite occur in the Sancheong anorthosites, south Korea. In order to determine their petrogenetic relationship and to classify the Fe-Ti ore bodies, we have synthetically analyzed characteristics in the field, such as distribution and occurrence, and petrologic features through detailed outcrop sketches. The ore bodies are divided into the regular vein dike- and irregular veinlet swarm types, according to their characteristics of contact with the anorthosites and internal structures. The former shows the tabularly intrusive contact and the pervasively ductile-sheared interior, while the latter, the irregularly tortuous contact and the almost intact interior. Most of the ore bodies are cross-cutting the foliation of the anorthosites and possess abundant anorthositic xenoliths, indicating their intrusion after the formation of foliation in the anorthosites. The mafic granulite, also bearing abundant anorthositic xenoliths, shows interior foliations nearly parallel to intrusion contact, and has abundant ilmenites approximately the same as those of the Fe-Ti ore bodies in chemical composition. And its intrusion into adjacent anorthosites is observed and the intrusion is finally changed into an irregular veinlet swarm type ore body. It is, thus, interpreted that the granulite in the study area was the host material of Fe-Ti ore bodies.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.159-170
• /
• 2016

In this study, the authors examine the ways in which social media ultimately affects the attachment of individuals to their favorite brands. Through an analysis of data using multiple linear regression, this study finds that SNS (social networking site) users that post status updates for a wide audience have no bearing on the individual's use of socialization agents. Those who consume social news passively are, however, likely to depend on socialization agents for determining their final purchase decisions. Socialization agents, both personal and non-personal, also play a role in the formation of brand attachment among individuals who depend on these social sources. Based on these results, marketers are encouraged to establish an online footprint of a social nature to formulate brand awareness and to provide a means for users of social media to improve their brand attachments to their favored brands. As this research was conducted exclusively in the predominantly collective culture of South Korea, further studies could attempt to analyze social networking use and socialization agent use via a cross-culture study, particularly one including an individualistic culture.