• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.526-538
• /
• 2001

Fatigue tests in air and in room temperature water were performed to obtain comparable data and stable crack measuring conditions. In air environment, fatigue crack growth rate was increased with increasing temperature due to an increase in crack tip oxidation rate. In room temperature water, the fatigue crack growth rate was faster than in air and crack path varied on loading conditions. In simulated light water reactor (LWR) conditions, there was little environmental effect on the fatigue crack growth rate (FCGR) at low dissolved oxygen or at high loading frequency conditions. While the FCGR was enhanced at high oxygen condition, and the enhancement of crack growth rate increased as loading frequency decreased to a critical value. In fractography, environmentally assisted cracks, such as semi-cleavage and secondary intergranular crack, were found near sulfide inclusions only at high dissolved oxygen and low loading frequency condition. The high crack growth rate was related to environmentally assisted crack. These results indicated that environmentally assisted crack could be formed by the Electrochemical effect in specific loading condition.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.95-98
• /
• 2005

We present results of Raman spectroscopic studies of superconducting $YBa_2Cu_3O_7$ (YBCO) coated conductors. Raman scattering is used to characterize optical phonon modes, oxygen content, c-axis misalignment, and second phases of the YBCO coated conductors at a micro scale. A two-dimensional mapping of Raman spectra with transport properties has been performed to elucidate the effect of local propertied on current path and superconducting phase. The information taken from the local measurement will be useful for optimizing the process condition.

• Geotechnical Engineering
• /
• v.10 no.1
• /
• pp.7-18
• /
• 1994

A new model for describing the behavior of clay under monotonic and cyclic loading is proposed. This model uses the hyperbolic representation for the stress -strain relationship in overconsolidated state and it describes undrained effective stress path on the basis of the critical state theory. The developed constitutive model by using an energy dissipation equation can describe the behavior of clay in heavily overconsolidated state as u.ell as lightly overconsolidated state under monotonic loading. In order to extend the model for the behavior of clay under cyclic loading, a shift function of undrained stress spacing ratio is introduced in the constitutive model developed for monotonlc loading. A single additional parameter is required to represent the cyclic effect and it can be reasonably deter mined from the test results. The measured behavior in undrained cyclic triaxial tests has been easily and precisely predicted by the newly developed constitutive model.

• IE interfaces
• /
• v.18 no.3
• /
• pp.277-287
• /
• 2005

In this paper, we deal with a new techno-economic modeling and analysis for optical access networks. In deploying the fiber-to-the-home (FTTH) architecture, network planner needs to consider the following techno-economic issues: when do we need to upgrade existing local access network to FTTH network? how much do we invest to maximize profit? In order to answer these techno-economic questions, we need to consider the impact of emerging technologies and business environment. Toward this end, we develop a new techno-economic modeling to deal with the inherent complexity of technology evolution and cost economics. In particular, the new modeling approach provides us with an techno-economic analysis of technology alternatives such as ethernet passive optical network (E-PON) and wavelength division multiplex passive optical network (WDM-PON). In this analysis, we focus on the impact of critical factors such as the cost characteristic of proposed architecture and digital subscriber line (DSL) subscriber's churn-in to FTTH service and churn-out. We develop mixed integer-programming models for finding the evolution path of local access networks to broadband network architectures.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.617-624
• /
• 2017

In this study, a new empirical method is presented to obtain Dynamic Increase Factor (DIF) in nonlinear static analysis of structures against sudden removal of a gravity load-bearing element. In this method, DIF is defined as a function of minimum ratio of difference between maximum moment capacity ($M_u$) and moment demand ($M_d$) to plastic moment capacity ($M_p$) under unamplified gravity loads of elements. This function determines the residual strength of a damaged building before amplified gravity loads. For each column removal location, a nonlinear dynamic analysis and a step-by-step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived, which correspond to the ratio min $[(M_u-M_d)/M_p]$ of beams in the bays immediately adjacent to the removed column, and at all floors above it. Therefore, the new DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of a moment frame structure. The proposed DIF formulas can estimate the real residual strength of a structure based on critical member.

• Architectural research
• /
• v.4 no.1
• /
• pp.53-61
• /
• 2002

The typical Critical Path Method (CPM) leaves it to the construction managers to overcome two problems in developing networks. First, the construction manager needs to prepare information on the type of activities and their precedence relations in order to develop a network schedule. Second, he or she can include space information into the network schedule such as the locations where the activities take place, only with difficulty. These two problems make it difficult for an inexperienced person to create a network. The purpose of this paper is to provide construction managers with set equations of creating a network schedule for multiunit projects. A space-resource combined network creation are presented in this paper, which includes equations for generating a list of required activities, their precedence relations, and information on their location. Information on the space (location) and the resource is the required data for this method. Based on this information, this method divides a project into a number of activities so that each activity contains the information on the location where the activity takes place and the principal resource required for that activity. Precedence relations are then obtained from the sequence of space and resource. This method has the potential to reduce human efforts in scheduling activities.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.258-267
• /
• 2016

Three-dimensional integrated circuits (3D ICs) experience die-to-die variations in addition to the already challenging within-die variations. This adds an additional design complexity and makes variation estimation and full-chip optimization even more challenging. In this paper, we show that the industry standard on-chip variation (AOCV) tables cannot be applied directly to 3D paths that are spanning multiple dies. We develop a new machine learning-based model and methodology for an accurate variation estimation of logic paths in 3D designs. Our model makes use of key parameters extracted from existing GDSII 3D IC design and sign-off simulation database. Thus, it requires no runtime overhead when compared to AOCV analysis while achieving an average accuracy of 90% in variation evaluation. By using our model in a full-chip variation-aware 3D IC physical design flow, we obtain up to 16% improvement in critical path delay under variations, which is verified with detailed Monte Carlo simulations.

• The Journal of the Korea Contents Association
• /
• v.2 no.3
• /
• pp.119-126
• /
• 2002

The QoS(Quality of Service) guarantee mechanism is one of critical issues in the wireless network. Real-time applications like VoIP(Voice over IP) in All-IP networks need smooth handoffs in order to minimize or eliminate packet loss as a Mobile Host(MH) transitions between network links. In this paper, we design a new multicasting algorithm using DB(Dynamic Buffering) mechanism for Mobile-IPv6. A key feature of the new protocol is the concepts of the DB and MRA(Multicast Routing Agent) to reduce delivery path length of the multicast datagram. Particularly, the number of tunneling and average routing length of datagram are reduced relatively, the multicast traffic load is also decreased.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.163-169
• /
• 2016

This study is to analyze factors affecting a growth of online community with perspectives of social network. Particularly this study tries to explore structural phenomenon built by interactions between users in a certain of free board belonging to the online community, in which focuses on one's writing a comments responding on those of others. With using SNA(Social Network Analysis), the social network data calculated from users' interaction shown as their comments were collected to draw out each individual's centrality value representing the structure of the online community and also we estimated duration time and the number of each comments as a proxy variable representing growth of the online community. And then cause-and-effect relationship between individual's centrality value and the duration time and the number of each comment were analyzed. As a result of the analysis, Core-Periphery, Centralization and Reciprocity have significant effects on the duration time and the number of each comment, therefore those significant values representing online structure will give an implication to manage, to promote the online community, to forecast its evolution path and to build critical policies.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.11a
• /
• pp.45-67
• /
• 2000

Broadband access technologies plays an important role in the national information infrastructure. In the evolution path of the information infrastructure, the relative economics of alternative access technology is the most critical determining factor. In this paper, we discuss the economics of local loop access technologies of existing technologies, such as, ADSL, HFC, and new PLC. To do this, we suggest appropriate configuration of access network system and its associated numerical equations. To modelize access network system and drive the numerical equations, we consider the DS (Double Star) and the T&B (Tree ＆ Brench) architecture and analyse the adequate block diagram of each access system for each technology We introduce the density of subscriber as a key variable and the equation of allocating optimal number of cell in a service area. We analyze the relative economics of local loop architecture in two different situations, that is, urban and rural. From the empirical implementation, we found that for the case of urban area, where the cost of cable and infrastructure is not necessary, there is not much difference in the cost per one subscriber. However, for the case of rural region, we found that there is remarkable difference in the cost per one subscriber among technologies. Therefore we conclude that the economics of local loop architecture is depend on the density of subscriber and existing network infrastructures. we hope that this paper contribute to the optimal technology selection of consmer, technology Providers, and government.