• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.427-430
• /
• 2006

Recently, it is necessary that construction industry should be into high value-added business lines using the measurement system because construction projects are increasing their complexity, variety and scale. But Performance measurement Systems that are most used around the world are subject to limitations for application on internal construction industry. This study addresses limitations of measurement system that is existing and proposes methodology for development of efficient Success Index system based on Critical Success Factors.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1184-1194
• /
• 2007

Recently, framed structure is increasingly being used as apartment structure due to the advantages during remodeling. Therefore, the use of lightweight panel as separating wall is increasing. To construct lightweight panel structures with sound insulation performance appropriate to the conditions of each field, measurement of sound reduction index(SRI) through panel structures should be performed. In this study, measurement of SRI through 46 kinds of panel structures was performed in the condition of various factors such as surface density, air space and absorber. The result showed that SRI of panel structures was generally higher by increasing of surface density. In the case of double panel with no absorber, SRI at below critical frequency was gradually increased according to rise of air space. Double panel with absorber make remarkable improvement in SRI at low frequency, but there is a little difference compared with SRI of double panel with no absorber over critical frequency.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.196-199
• /
• 2012

CdS thin film was prepared on glass substrate by chemical bath deposition in an alkaline solution. The optical properties of CdS thin film were investigated using spectroscopic ellipsometry. The real (${\varepsilon}_1$) and imaginary (${\varepsilon}_2$) parts of the complex dielectric function ${\varepsilon}(E)={\varepsilon}_1(E)+i{\varepsilon}_2(E)$, the refractive index n(E), and the extinction coefficient k(E) of CdS thin film were obtained from spectroscopic ellipsometry. The normal-incidence reflectivity R(E) and absorption coefficient ${\alpha}(E)$ of CdS thin film were obtained using the refractive index and extinction coefficient. The critical points $E_0$ and $E_1$ of CdS thin film were shown in spectra of the dielectric function and optical constants of refractive index, extinction coefficient, normal-incidence reflectivity, and absorption coefficient. The dispersion of refractive index was analyzed by the Wemple-DiDomenico single-oscillator model.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.8 s.101
• /
• pp.939-944
• /
• 2005

In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.456-459
• /
• 2002

It is lately issued studies on EVMS(Earned Value Management System) throughout construction industry, which is management system integrating cost and schedule effectively. So identifying importance and circumstance of introducing EVMS, CPI(Cost Performance Index) and SPI(Schedule Performance Index), which are critical components on schedule introducing EVMS, calculate and it intends to analyze the trend and problem of cost and time throughout project management, applying various statistical data analysis method.

• Knowledge Management Research
• /
• v.6 no.2
• /
• pp.105-118
• /
• 2005

The future will see all industries become technology-driven in the competitive global market place. Firms with deep technological roots and innovation strategies have some advantages. Business valuation of technology is critical to the future of firm's business. In this situation widely used scoring valuation is not enough to evaluate relative business competitiveness associated with technology and to assign its relative ranking category. Therefore, a more useful and comprehensive new valuation approach, which is called business composite index, is needed to complement and to enhance the existing scoring valuation approach. In this research, statistical factor analysis is applied to determine the common factors and to estimate associated weights. And business composite index, which is a kind of weighted scoring method, is derived based on the results of factor analysis. This research shows that business composite index is considered very useful to measure the business relative strength of individual technology and also to assign its relative ranking category instead of absolute ranking based on scoring valuation approach.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.2
• /
• pp.243-248
• /
• 2009

The Larval critical weight is the minimal mass at which further growth in not necessary for a normal time course to pupation. Larval critical weight (Lcw), pupal critical weight (Pcw) and adult critical weight (Acw) of different breeds of Bombyx mori L. were determined through starvation (food deprivation). The Lcw was found to be about 938.46, 2397.26, 2283.57 and 2220.97 mg in males and 1118.15, 2681.04, 2604.9 and 2455.88 mg in females of the multivoltine breed (Nistari), Bivoltine breeds (P5 & NB18) and their hybrid (P5$\times$NB18) respectively. Bivoltine breed P5 took more time (3.35 days) followed by NB18 (3.13 days) & P5$\times$NB18 (3.02 days) to attain larval critical weight (In $5^{th}$ Instar) than the multivoltine breed Nistari (2.42 days). Decrease in weight from larval maximal weight to pupal weight and to adult weight was also observed more in multivoltine than bivoltines, which may be due to more latent feeding period in bivoltines. Since Lcw is a stable character and independent of environment, it could be utilized for characterization of silkworm breeds to assess the quality of an insect.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.139-140
• /
• 2007

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.19-24
• /
• 2003

A new method for designing critical control systems is proposed in this paper. The controller structure is chosen as a Davison type integral controller with an observer. The proposed method consists of two steps. First, the state feedback critical control system is designed using a quadratic performance index with tunable parameters. Second, the observer gain matrix is determined by the formal LTR procedure using a Riccati equation. Consequently, the search space can be reduced considerably compared with the conventional approach. Although the proposed method sacrifices a large freedom for the choice of controller structure provided by the principle of matching, the controller structure used in this paper is not excessively complex and can be used for most applications. An illustrative design example is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1180-1188
• /
• 2008

As many systems depend on electronics, concern for fault tolerance is growing rapidly in the safety critical system such as intelligent vehicle. In order to make system fault tolerant, there has been a body of research mainly from aerospace field including predictive hybrid redundancy by Lee. Although the predictive hybrid redundancy has the fault tolerant mechanism to satisfy the fault tolerant requirement of safety crucial system such as x-by-wire system, it suffers form the variability of prediction performance according to the input feature of system. As an alternative to the prediction method of predictive hybrid redundancy for robust fault tolerant, Kalman prediction has attracted some attention because of its well-known and often-used with its structure called Kalman hybrid redundancy. In addition, several numerical simulation results are given where the Kalman hybrid redundancy outperforms with predictive smoothing voter.