• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.374-377
• /
• 2006

The measured longitudinal reinforcement tensions in the shear-critical RC beams were significantly higher than the calculated values by the beam theory. This may be attributed to the reduction of the internal-moment arm length by the development of the arch action. In this paper, the measured longitudinal reinforcement tensions in the test performed by Kim were compared with those predicted by the new truss model on the basis of the compatibility condition of the shear deformation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.340-345
• /
• 2001

In this paper, We have studied on the critical vibration limits of spindle unit for the high speed ball pen tip processing machine. The vibration of bearing can be measured by FFT, and the influence of vibration amplitude due to the Unbalance, bearing deflect, bite and timing belts tension are analyzed. So, the critical vibration limits of spindle is determined by the X, Z directional vibration of spindle Unit.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권5호
• /
• pp.361-366
• /
• 2020

Guided bone regeneration (GBR) is a surgical procedure that utilizes bone grafts with barrier membranes to reconstruct small defects around dental implants. This procedure is commonly deployed on dehiscence or fenestration defects ≥2 mm, and mixing with autogenous bone is recommended on larger defects. Tension-free primary closure is a critical factor to prevent wound dehiscence, which is critical cause of GBR failure. A barrier membrane should be rigidly fixed without mobility. If the barrier is exposed, closed monitoring should be utilized to prevent secondary infection.

• 태양에너지
• /
• 제8권1호
• /
• pp.33-40
• /
• 1988

The characteristics of thermal instabilities of natural convection in a horizontal fluid layer bounded below by a rigid plate and above by an interface with a passive gas is presented. The critical Grashof number decreases as the surface tension gradient effect (Marangoni effect) at the interface increases and the flow remains unstable for a critical Marangoni number depending on Prandtl numbers. These results are in substantial agreement with those of Smith and Davis.

• 한국응용과학기술학회지
• /
• 제4권2호
• /
• pp.43-48
• /
• 1987

Isoelectric point and surface tension of twelve of the alkylcarboxy betaines such as 2-(trimethylammonio) dodecanoate, 2-(trimethyammonio) tetradecanoate, 2-(trimethylammonio) hexadecanoate, (dimethyldodecylammonio)ethanoate, (dimethyltetradecylammonio)ethanoate, (dimethylhexadecylammonio) ehtanoate, 2-(dimethylododecylammonio) propanoate, 2-(dimethyltetradecylammonio)proopanoate, 2-(dimethylhexadecylammonio)propanoate, 2-(dimethyltetradecylammonio)-3-phenyl propanoate, 2-(dimethyltetradecylammonio)-3-phenyl propanoate are tested. From the measurement of the isoelectric point, it was found that the isoelectric point were leaned toward the alkaline zone for c-alkylarbrxybetaines, and toward the acidic zone for N-alkylcarboxybetaines. At the range of the carboxybetaine concentration $2\;{\times}\;10^{-2}{\sim}2\;{\times}\;10^{-5}$mole/l, the surface tension of the aqueous solution were decreased to 30-38 dyne/cm, showing the tendency that the ability of lowering the surafce tension was depending on the increase of carbon atom number in the lipophilic alkyl chain. The critical micelle concetration measured by the surface tension and concentration curves have been found at the range of $10^{-2}{\sim}10^{-5}$mole/l.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.155-166
• /
• 2020

Ductile fracture prediction is critical for the reasonable damage extent assessment of ships and offshore structures subjected to accidental loads, such as ship collisions and groundings. A fracture model combining the Hosford-Coulomb ductile fracture model with the domain of solid-to-shell equivalence model (HC-SDDE), was used in fracture simulations based on shell elements for the punching fracture experiments of unstiffened and stiffened panels. The flow stress and ductile fracture characteristics of JIS G3131 SPHC steel were identified through tension tests for flat bar, notched tension bar, central hole tension bar, plane strain tension bar, and pure shear bar specimens. Punching fracture tests for unstiffened and stiffened panels are conducted to validate the presented HC-DSSE model. The calibrated fracture model is implemented in a user-defined material subroutine. The force-indentation curves and final damage extents obtained from the simulations are compared with experimental results. The HC-DSSE fracture model provides reasonable estimations in terms of force-indentation paths and residual damage extents.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1366-1371
• /
• 2003

Molecular dynamics (MD) simulations are conducted to investigate the thermophysical characteristics and the stability of liquid threads for various conditions. A cylindrical thread in the simulation domain is made of Lennard-Jones molecules. The surface tension of liquid threads can be determined from local densities, local normal and transverse components of the pressure force. In order to understand the effects of thread radii on surface tensions, the Tolman equation is modified on the basis of the cylindrical coordinates for prediction of surface tensions. Surface tensions calculated from the MD simulation agree with the prediction from the modified Tolman equation. In addition, surface tensions decrease linearly with increasing system temperature. For a binary system, the surface tension decreased linearly compared to that for a pure system with increasing binary ratio of solute molecules which have relatively large value of the affinity coefficient. For a fixed binary ratio, the surface tension increased slightly with the affinity coefficient and the maximum value appear around where the affinity coefficient is 1.5 and decreased rapidly for upper value of 1.5. In addition, the critical wavelengths of perturbations are proven to be directly proportional to the equimolar dividing radii of the liquid threads.

• 한국시뮬레이션학회논문지
• /
• 제10권1호
• /
• pp.63-65
• /
• 2001

To investigate the natural frequencies of curved piping systems with various elbow angles conveying flow fluid, a simulation is performed considering Initial tension due to the inside fluid. The system is analyzed by finite element method utilizing straight beam element. Elbow part is meshed using 4 elements, and the initial tension is considered by inserting equivalent terms into the stiffness matrix. Without considering the initial tension, the system becomes unstable, that is, the fundamental natural frequency approaches to zero value fast, as the flow velocity reaches critical value. With the initial tension terms, the system becomes stable where there is no abrupt decrease of the fundamental natural frequency. The change rate of the natural frequency with respect to the flow velocity reduces. As elbow angle increases, the system becomes stiffer, then around 150 degrees of the elbow angle the natural frequency has the largest value, the value decreases after the angle of the largest natural frequency. When angle is between 170 degrees and 179 degrees, the natural frequency is very sensitive. This means that small change of angle results in great change of natural frequency, which is expected to be utilized in the control of the natural frequency of the piping system conveying flow fluid.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.69-73
• /
• 2001

In this study, we fabricated Bi-2223/Ag high temperature superconducting tapes using PIT(Powder-In-Tube) process to apply the superconducting magnet, cable and etc. It is inevitable to deform the superconducting taps with axial strain for application. Therefore, for the characterization of the strain sensitivity of the superconducting properties, the degradation of Bi-2223/Ag tapes due to axial strain were investigated by measuring the critical current as a function of applied tension strain and external magnetic field. The critical current of Bi-2223/Ag tapes were decreased slightly up to 0.3∼0.4% applied strain but, drastically decreased more than these strains. Superconducting filament cores consisted of brittle ceramic fibers were broken easily by the large strain and current path were decreased simultaneously.

• 대한화학회지
• /
• 제10권4호
• /
• pp.161-165
• /
• 1966

The critical concentrations of ${\alpha}$-amino capric acid for micelle formation have been determined by the surface tension measurements in both acidic and alkaline solutions, and also by the dye titration using Rhodamine B in alkaline solutions. The critical micelle concentrations obtained by the two methods show the good agreements within experimental errors. Since ${\alpha}$-amino acid is an ampholyte, it may aggregate to form the micelles in both more acidic and basic media than its isoelectric point. It is found that the basic media are rather preferable for the micelle formation than the acidic media. The effect of gegen ions upon the critical concentration for micelle formation in alkaline media is similar to that expected from the salt effect on the CMC (Critical Micelle Concentration).