• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.227-234
• /
• 2009

At present, the length of deceleration lane at freeway diverging areas are designed based on the design speed of main lines and ramps. This is possible on assumption that diverging vehicles decelerate at deceleration section after moving to shoulder lane in advance. But with high diverging volume, several vehicles will try to change to exit lane at the same time. This will cause the distribution of main lane flows or some vehicles may encounter short deceleration length because they miss the proper time to change the lane. The purpose of this study is to establish a design guideline of the length of deceleration section considering the volume of diverging traffic. Also, the results of analysis by the FRESIM simulation model shows that some improvements in respect of delays, speeds and speed deviations of mainline and deceleration lane.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.27-33
• /
• 2023

Electric vehicles are widely produced from many car manufacturers around the world instead of internal combustion engine vehicle in order to respond a variety of environmental regulations. Also, they are applying for modular design method to develop plenty of the vehicles. And, both of these two issues will be an important trend to lead the future global automobile industries for a long time. In this paper, new brake architecture concept is proposed in order to respond to such a situation. First, physical interfaces between brake system like caliper, disc and other counter-parts are established for modular assembly. Second, we analyze effective factors of brake system for electric vehicles which need to reflect vehicle specifications such as total vehicle weight. Here, we consider ideal brake force by critical deceleration. Third, we simulate accumulated regenerative brake energy for two main driving modes to confirm to effectiveness for a variety of Electric Vehicle. Finally, we hope that it contributes to implement brake architecture for the development of Electric Vehicle platform through such a study.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.4
• /
• pp.131-135
• /
• 2002

This paper describes a new ultra-fast contingency screening algorithm for on-line TSA without time simulation. All machines are represented in a classical model and the stability index is defined as the ratio between acceleration power during a fault and deceleration power after clearing the fault. Critical clustering of machines is done based on the stability index, and the power-angle curve of the critical machines is drawn assuming that the angles of the critical machines increase uniformly, while those of the non-critical ones remain constant. Finally, the critical clearing time (CCT) is computed using the power-angle curve. The proposed algorithm is tested on the KEPCO system comprised of 900-bus and 230-machines. The CCT values computed with the screening algorithm are in good agreement with those computed using the detailed model and the SIME method. The computation time for screening about 270 contingencies is 17 seconds with 1.2 GHz PC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.315-320
• /
• 1988

This paper considers modelling and control of ABS(Anti-skid Brake System) which avoids dangerous wheel locking due to excessive brake pressure during the vehicle braking. The brake pressure is controlled by on and off's of solenoid valves via the variation of the wheel circumferential deceleration measured using tacho-sensors. The dynamic model between the brake pressure and the wheel acceleration of a vehicle is mathematically derived. The computer simulation shows that the threshold value of the on-off control is critical to the performance of the ABS.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.139-143
• /
• 2019

In this study, we tried to derive the most severe scenario and its critical speed by 1-D collision simulation with a variable formation vehicle in order to prepare for the change of demand in Seoul Metropolitan Subway Line 3, which is operated by fixed arrangement. After establishing various collision scenario conditions, the friction coefficient between the wheel and the rail was evaluated as 0.3, which is considered to be severe. As a result of analysis according to all scenarios, the most severe scenario conditions were confirmed by comparing rubber shock absorber performance and vehicle collision deceleration. In addition, a typical wheel-rail friction coefficient was derived through accident cases, and the analysis was performed again and compared. Finally, the criterion of the critical speed in the condition of the friction coefficient of the normal wheel - rail condition was confirmed.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.73-76
• /
• 2001

This paper presents a new systematic contingency selection, screening and ranking method for on-line transient security assessment. Transient stability of a particular generator is influenced most by fault near it. Fault at the transmission lines adjacent to the generators are selected as contingency. Two screening methods are developed using the sensitivity of modal synchronizing torque coefficient and computing an approximate critical clearing time(CCT) without time simulation. The first method, which considers only synchronizing power, may mislead in some cases since it does not consider the acceleration power. The approximate CCT method, which consider both the acceleration and deceleration power, worked well. Finally the Single Machine Equivalent(SIME) method is implemented using IPLAN of PSS/E for detailed stability analysis.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.98-104
• /
• 2012

Current [Guideline for Installation and Management of Sidewalks and Safety Facilities on Roads] suggests that the types of curbs should be Barrier curb ($85^{\circ}$). Although Barrier curbs ($90^{\circ}$) were not specified in the guideline. The curbs installed on the roads currently are Barrier curbs ($90^{\circ}$) which are not specified in the installation standard. Therefore, it is critical to prepare for the installation standard of curbs by researching types of curbs and driving safety. This research have assessed the driving safety throughout Full Scale Crash Test according to type of curbs (Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$)). Barrier curbs ($90^{\circ}$) showed higher figure in Theoretical head Impact Velocity, Post-impact Head Deceleration, Vehicle Damage when Crash, Passenger's Wounds Severity, and every other items than Barrier curbs ($85^{\circ}$). Barrier curbs ($85^{\circ}$) were found to have better Occupant Safety Index. Analysis of Behavior Using Full-Scale Crash Test showed difference depending on the Impact Condition between Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$). Generally, Barrier curbs ($85^{\circ}$) were superior than Barrier curbs ($90^{\circ}$) in terms of protecting the passengers and vehicle damages. When an impact angle increases, Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs, two types of curb showed similarity. However, if an impact of an angle decreases, Barrier Curbs ($85^{\circ}$) showed excellence in Driving Safety such as Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1132-1138
• /
• 2009

Brake friction materials in railway applications are one of critical elements for acceleration and/or deceleration of vehicle, stop at designated position, and stability of vehicle operation. In this investigation, a comprehensive overview on international standards on brake friction materials, including UIC, JI, and AAR, was conducted to understand the current standards creation trend and collect the related information on brake friction materials with different applications. Moreover, the detailed conditions such as testing conditions and environment, testing items, and materials, were carefully reviewed and compared by each standard. The preliminary results will be used for the creation of Korean railway standards (KRS) on brake shoe materials.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.91-93
• /
• 2004

This paper is to develope the fast screening algorithm for on line transient security assessment. All generators are represented in a classical model and stability index is defined as a ratio between acceleration power and deceleration power Critical machines and remaining machines are identified based on stability index and aggregated into two equivalent machines. And finally equivalent machines are reduced into OMIB system then CCT is computed. The Proposed algorithm is applied to the KEPCO system and obtained the reasonable results compared with TSA Tool.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.1
• /
• pp.21-28
• /
• 2024

Many global car manufacturers in the world are recently developing a variety of electric vehicles in response to demanding market needs. Also, they have adapted the architecture method in order to develop electric vehicles effectively. It is because architecture method can produce various electric vehicles with high profitability. However, when electric vehicles are being developed, brake system has a lot of demanding tasks in relation to deciding specification of brake system because of heavy vehicle weight, narrow power electric room space and large volume of electric hydraulic booster. In this paper, a new approach is proposed for deciding the front and rear brake systems in order to design the brake system of electric vehicles effectively. To do this, we study correlations among vehicle weight, layout of power electric room and volume of electric hydraulic booster. And then, we also study combination of hydraulic braking and regenerative braking which is widely applied to electric vehicles. Finally, we want to contribute to build up modular design of brake system for architecture of electric vehicles through these studies.