• 열처리공학회지
• /
• 제12권3호
• /
• pp.206-214
• /
• 1999

The effect of cooling rate on carbide precipitation during quenching of austenitic manganese steel was investigated by optical microscopy, image analyzer and numerical analysis. A computer program based on the finite difference method for analyzing heat treatment processes was developed in order to evaluate cooling rates and the possibility of carbide precipitation during quenching. The area ratio of carbide precipitated in the austenite matrix was measured by the image analyzer, and used to determine the critical point of carbide precipitation. Temperature-dependent critical cooling rates at the critical points were calculated using the present simulation program, The calculated results showed a good agreement with the experimental ones.

• Journal of Information Technology Applications and Management
• /
• 제14권4호
• /
• pp.121-138
• /
• 2007

This study proposes a method to improve network security systems based on critical success factors for systems development. To accomplish the research objective, the study analyzes required functions of network security systems and reviews existing methods to improve network security systems. Based on the analyses and literature review, critical success factors for development of network security systems are identified and a new method to improve network security systems based on the critical success factors is proposed. The proposed method to improve network security systems is based on utilizing multi-core processors. A prototype is developed and validated. This study will provide a good case in the network security area where research incorporating both engineering and management disciplines lacks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.513-518
• /
• 2001

This research has been performed to estimate the hunting motion hysteresis of railway passenger cars. An old and a new car with almost same structure are chosen as analysis models. To solve effectively a set of simultaneous equations of motion strongly coupled with creep relations, shooting algorithm in which the nonlinear relations are regarded as a two-point boundary value problem is adopted. The bifurcation theory is applied to the dynamic analysis to distinguish differences between linear and nonlinear critical speeds by variation of parameters. It is found that there are some factors and their operation area to make nonlinear critical speed respond to them more sensitivity than linear critical speed. Full-scale roller rig tests are carried out for the validation of the numerical results. Finally, it is concluded that the wear of wheel profile and the stiffness discontinuities of wheelset suspension caused by deterioration have to be considered in the analysis to predict hysteresis of critical speed precisely.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.112-119
• /
• 1995

Early fracture and cutting force of ceramic tool for hardened STC3 steel was investigated in this study. It was found that early fracture of ceramic tool was mostly occurred before normal wear was progressed beyond a critical cutting speed and normal wear was performed under the critical cutting speed. The relationships among critical cutting speed, which was a cause of early fracture, suggested cutting cross section, that is, maximum thickness of cut and width of cut, and cutting force were examined. The following conclusions were obtained: (1)Critical cutting speed showed a high value in the case of small maximum thickness of cut and large nose radius, but was not influenced by width of cut, (2)Principal, feed and radial force, respectively, showed the proportional value to constant cutting area, width of cut and maximum thickness of cut orderly, (3)Occurrence of early fracture was dependent upon radial force.

• 대한가정학회지
• /
• 제35권1호
• /
• pp.191-204
• /
• 1997

Reserarch on marital satisfaction adjustment or quality has been one of the most frequently studies area of the investigation in the family field. Yet there has been many problems with the theory and empirical work in this area especially in the area of definitional ambiguity problems of dimensionality level of analysis and problems of measurement. This article is a critical review of this work including both theoretical and empirical problems that typically have occured with the previous research Also a section on suggested modifications for future research in this area and a section of suggestion of new marital satisfaction measurement are included.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.14-18
• /
• 2021

The Mg-Powder-Compaction (MPC) process is proposed to fabricate the MgB₂ superconducting wires. Mg powder wall, similar to the Mg metal tube, inside the Nb outer sheath has been made and the stochiometric B powder was inserted into the wall. Even though the very high MgB₂ core density of 2.53 g/cm³ is obtained, the superconducting area fraction of MgB₂ is not high enough for the applications. In this work, an advanced MPC process was adopted by adding Mg powder into B powder. The Mg powder wall in the initial wire was fabricated by controlling the wall thickness while maintaining a constant density, and the mixture of B and Mg powder was filled into the Mg powder wall with the same filling density. It is found that the reduction in the area of the Mg powder wall proceeds similar to the wire, and the Mg powder wall is well maintained at the final wire diameter, which is advantage for the fabrication of long wires. With the advanced MPC process, as the added Mg is increased the densities of MgB₂ core is decreased and the porous structure is formed, it is found that the area fraction of superconducting MgB₂ increase up to the 37.7 % with the improved high critical current density (J_c) and the engineering critical current density (J_e).

• 토지주택연구
• /
• 제10권2호
• /
• pp.1-13
• /
• 2019

This study suggests that the system improvement priority of the Natural Conservation Zone of the Metropolitan Area Maintenance Planning Law, which was enacted for about 37 years. First of all, through the precedent research and the consultation meeting, the improvement plan was divided into the short term and the mid(or long) term. Important findings and implications are as follows. The short-term priority results were 'Improve water quality regulation', 'Strengthen individual location regulations of factories and induce multi-use plan position', and 'Improvement of waterfront area regulation', which were both critical and urgent. The mid-term(or Long-term) priority results were 'To integrate development and environmental duplication regulations', 'Abolition and unification of environmental laws', and 'Adjustment and resetting of natural conservation areas', which were both critical and urgent. On the other hand, 76.4% of the residents and 64.5% of the experts are concerned about the necessity of improvement of the Natural Conservation Zone system. Both residents and experts seem to be aware of the necessity. Opinions about Improvement and mitigation of regulations on Natural Conservation Zone that were constantly raised. In the past, there was a temporary and fragmented institutional mitigation of the government. However, with the rapid development of eco-friendly technologies since 2010, Our Country Conditions is in a transition period. This study has significant implications for the improvement and mitigation of metropolitan area regulations.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.157-165
• /
• 2000

A discharge free Electro-Rheological Squeeze Film Damper (ER-SFD) with predetermined-clearances at leakage ends can inherently eliminate electric discharge problems while still supplying stable leakage control. Test results show that the damping force of the slotted-ring ER-SFD is mainly affected by electric voltage, oil supply pressure, position of the damper and ratio of effective surface area of slotted-rings. As the supply voltage is larger, the amplitudes of both slotted ER-SFD and rotor are decreased at first and second critical speeds. The influence of the oil supply pressure and the effective surface area ratio was shown mainly near the first critical speed. The effective surface area ratio of slotted-rings influences the reduction of flexible rotor vibration. As a result, experimental results confirm that the slotted-ring ER-SFD satisfactorily controls the flexible rotor vibration, while eliminates the inherent electric discharge problems in conventional ER-SFDs.

• 수산경영론집
• /
• 제45권1호
• /
• pp.1-16
• /
• 2014

The study attempts to show that the theory of critical environmental variation quantum(CEVQ) has a sound logical basis and empirical support. It is well known that the theory of critical environmental variation quantum is derived from the theory of biological probability distibution function and the central limit theorem(CLT) in statistics. The study uses the case study of fisheries damages compensation caused br the public marine construction undertaken in the area do Anjeong Bay in the city of Tongyeong for empirical test of theory of CEVQ. The results shows that the CEVQ theory perfoms a good job in measuring quantatively fjsheries damages caused by outflow of cold water due to the operation of LNG company since 2002. Therefore the study proves that the CEVQ theory is a good theory having internal consistency and empirical applicability.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1099-1107
• /
• 2009

Numerical simulation and experimental study to evaluate the critical speed of the railway bogie according to the tread inclination of wheel profile were conducted using 1/5 scale model. It has been shown that the results of the critical speed analysis for the scale bogie model is very close to the test results using scale bogie model and the critical speed is decreased in proportion to the increase of equivalent conicity of wheel profile. Results of this study show that the scale model could be applied to research area relating to vehicle stability as an alternative to overcome the experimental problems caused by full scale test on the roller rig.