• 대한토목학회논문집
• /
• 제40권5호
• /
• pp.497-507
• /
• 2020

Tetrapod로 피복된 경사형 수중구조물을 대상으로 파랑의 전파현상을 검토하기 위해 2차원 수리실험을 수행하였다. 수리실험은 수중구조물의 서로 다른 상대여유수심, 상대여유고, 상대상단폭 및 파형경사 등을 적용하여 수행되었다. 수리실험결과를 이용하여 경사형(부분투과형) 수중구조물에 대한 파고전달계수 산정식을 제안하였다. 제안된 경험식은 경사형 수중구조물의 파고전달계수를 충분한 정도로 예측함을 확인하였으며, 기존 경험식을 개선하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제6권4호
• /
• pp.206-212
• /
• 2013

Self-excited pulse jet is a specific nozzle with a closed chamber which can change a continuous jet into a pulse one. Energy of the pulse jet can be output not only unevenly but also with multifrequency. With the peak pressure of pulse jet, the hitting power would be 2~2.5 times higher than that of continuous jet. In order to reveal the correlation between the self-excited pulse frequency and nozzle diameter ratio, nozzle spacing and operating pressure, the model of 3D unsteady cavitation model has been used. We found that with the same nozzle structure parameters and the different operating pressure, the self-excited frequency and the width of peak crest are different, but the wave profiles are similar. With FFT, we also found that the less bandwidth of amplitude in low frequency range will lead to the wider wave crest of outlet velocity in its time domain, and the larger force of the strike will be gained. By studying the St of self-excite nozzle, not only the frequency of a certain nozzle can be predicted, but also a nozzle structure with a certain frequency can be designed.

• 대한토목학회논문집
• /
• 제40권6호
• /
• pp.593-601
• /
• 2020

콘크리트블록으로 피복된 불투과형 수중구조물을 대상으로 파랑의 전파현상을 검토하기 위해 2차원 수리실험을 수행하였다. 수리실험은 수중구조물의 서로 다른 상대여유수심, 상대여유고, 상대상단폭 및 파형경사 등을 적용하여 수행되었다. 수리실험결과를 이용하여 불투과형 수중구조물에 대한 파고전달계수 산정식을 제안하였다. 제안된 경험식은 불투과형 수중구조물의 파고전달계수를 충분한 정도로 예측함을 확인하였으며, 기존 경험식을 개선하였다.

• Journal of Periodontal and Implant Science
• /
• 제40권2호
• /
• pp.96-101
• /
• 2010

Purpose: The purpose of this study was to evaluate the effect of collagen matrix with apically positioned flap (APF) on the width of keratinized gingiva, comparing to the results of APF only and APF combined with free gingival graft (FGG) at the second implant surgery. Methods: Nine patients were selected from those who had received treatments at the Department of Periodontics, Chosun University Dental Hospital, Gwangju, Korea. We performed APF, APF combined with FGG, and APF combined with collagen matrix coverage respectively. Clinical evaluation of keratinized gingival was performed by measuring the distance from the gingival crest to the mucogingival junction at the mid-buccal point, using a periodontal probe before and after the surgery. Results: The ratio of an increase was 0.3, 0.6, and 0.6 for the three subjects in the APF cases, 3, 5, and 7 for the three in the APF combined with FGG case, and 1.5, 0.5, and 3 for the three in the APF combined with collagen matrix coverage case. Conclusions: This study suggests that the collagen matrix when used as a soft tissue substitute with the aim of increasing the width of keratinized tissue or mucosa, was as effective and predictable as the FGG.

• 대한치과보철학회지
• /
• 제36권3호
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• Imaging Science in Dentistry
• /
• 제33권1호
• /
• pp.43-49
• /
• 2003

Purpose : To evaluate the differences in bone height, bone width, and visibility of posterior spiral tomographic images according to various exposure directions, image layer thickness, and inclination of the mandibular inferior border. Materials and Methods: Six partially and completely edentulous dry mandibles were radiographed using Scanora spiral tomography. Spiral tomography was performed at different exposure directions (dentotangential and maxillotangential projection), image layer thicknesses (2 mm, 4 mm and 8 mm), and at various inclinations to the mandibular border (+ 100, 00 and -10°). The bone height and width was measured using selected tomographic images. The visibility of mandibular canal, crestal bone, and buccal and lingual surfaces were graded as 0, 1, or 2. Results : The bone width at the maxillo-tangential projection was wider than at the dento-tangential projection (p < 0.05). The visibility of buccal and lingual surface at the maxillo-tangential projection was higher than at the dento-tangential projection (p<0.05). Thinner image layer thicknesses resulted in greater visibility of buccal and lingual surfaces (p < 0.05). Bone height was greatest in the -10° group, and at the same time the bone width of the same group was the narrowest (p < 0.05). The visibility of alveolar crest and buccal surface of the + 10° group was the highest, while the visibility of the mandibular canal was greatest in the 00 group. Conclusion: When spiral tomography is performed at the mandibular posterior portion for visualization prior to implant surgery, it is important that the inferior border of mandible be positioned as parallel as possible to the floor. A greater improvement of visibility can be achieved by maintaining a thin image layer thickness when performing spiral tomography.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.419-429
• /
• 1998

본 실험은 유성견에서 인위적인 정출 시 조직학적, 임상학적인 반응과 시간경과에 따른 치아 및 치아 주위조직의 회복을 연구하기 위해 생후 평균 10 개월 웅성 잡종 유성견 하악 소구치를 대상으로 Energy chain을 이용한 정출 실험으로, 실험 1 군은 힘을 작용 시킨 후 일 주일만에 희생시키고 실험 2 군은 정출력을 가한 후 일 주일 후, 정출력이 제거되고 3 주간의 회복 기간 경과 후에 희생시켰다. HE 및 Masson's Trichrome 염색법을 이용하여 치아와 주위 조직의 반응을 치경부, 치근 중앙부, 치근단부, 치수부로 분류하여 광학 현미경하에서 관찰하여 다음과 같은 결과를 얻었다. 1. 힘을 가한 후 일 주일 후, 모든 부위에서 치주인대의 주행방향이 치아를 향하여 사선 방향을 나타내 주었으며 치주인대의 간격이 전반적으로 증가되었다. 또 부분적인 치주 인대의 파열이 치근단부에서 뚜렷하게 관찰되었다. MT 소견에서는 대조군에 비해 치조능 부위에서 미성숙 골의 형성을 보여주었다. 주위 치조골에서는 편측으로 활발한 골조직의 형성이 관찰되었다. 치수에서는 치근단 부위에서 많은 혈관의 파열을 보여 주었고 공포의 형성과 충혈을 나타냈다. 2. 힘을 제거 된 후3주간의 보정을 한 군의 모든 치주인대의 주행 방향과 간격이 대조군과 같이 회복되었으며 밀도는 치밀하게 나타났다. MT소견에서 1군에서 형성된 치조능의 미성숙 골이 석회화가 이루어짐을 보여주었고 치수의 공포와 충혈의 감소를 보여주었다. 수복과정에서의 치수의 섬유화가 더욱 진행되었다. 이상의 결과를 종합해 볼 때, 3주간의 회복 기간 중에도 치주 인대 부위에서는 대조군과 유사한 조직 소견을 보여 상당한 회복능력을 보였지만 치수에서는 섬유화가 진행됨을 보여 더욱 긴 회복 기간이 필요함을 보여주었다.

• 전력전자학회논문지
• /
• 제11권2호
• /
• pp.113-119
• /
• 2006

본 논문은 CTDP 기법을 이용한 다양한 역기전력을 갖는 BLDCM(Brushless DC Motor)의 토크특성에 대하여 연구하였다. 상전환 및 상전환 시점에 의한 토크맥동을 개선하기 위한 CDTP 기법을 제안하였다. 이를 위하여 Hague의 해석방법에 따른 실제 역기전력을 갖는 BLDCM의 제어에 적용하였으며 이때 실제 역기전력은 착자의 가장자리 지수와 평탄구간에 의해 발생된다. 이의 검증을 위하여 시뮬레이션 및 실험을 통하여 제안한 방식을 이용한 토크맥동 저감방법의 타당성을 살펴보았다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.85-92
• /
• 2005

Reconstruction of defect in the anterior part of the maxilla to enable implant placement or prothesis is a complicated treatment due to the anatomical position and lack of soft tissues. Two cases are presented in which autogenous iliac PMCB(particulate marrow and cancellous bone) with titanium mesh were used for premaxilla reconstruction and alveolar bone repair of the anterior maxillas prior to denture and implants fixation respectively. Cancellous bone from the anterior iliac crest was compressed and placed against a titanium mesh fixed to the bone of palate in a patient with severe defect of the anterior maxilla. There were no problem in the healing, and the anterior maxillas of two patients had increased height and width during the initial healing and remodeling. The clinical reports describe the use of titanium mesh for reconstruction of premaxilla. Autogenous bone grafts were harvested from the iliac crest and were loaded on a titanium mesh that were left in the patient's maxilla for 6 months before they were removed respectively. The radiographic analysis demonstrated that a 10mm vertical ridge augmentation had been achieved. In guided bone regeneration, the quantity of bone regenerated under the barrier has been demonstrated to be directly related to the amount of the space under the membrane. This space can diminish as a result of membrane collapse. To avoid this problem which involved the use of a titanium mesh barrier to protect the regenerating tissues and to achieve a rigid fixation of the bone segments, were used in association with autologous bone in 2 cases. The aim of this study was to evaluate the capability of a configured titanium mesh to serve as a mechanical and biologic device for restoring a vertically defected premaxilla.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.65-72
• /
• 2018

지진 시 댐에 여유고 이상의 과도한 침하가 발생하는 경우 댐의 붕괴로 이어질 수 있다. 댐의 침하는 댐의 손상 예측에 중요한 지표로 사용되는 횡균열 폭과 깊이에 높은 상관성을 가진 것으로 알려져 있으므로 댐의 손상 평가에서 정확한 침하량 예측이 중요하다. 국내에서는 국외에서 수치해석을 통하여 도출된 경험적인 식이 댐의 손상 평가에 널리 사용되고 있다. 본 연구에서는 필댐으로 분류되는 콘크리트 표면차수벽 석괴댐(CFRD)과 코어형 석괴댐(ECRD) 대표 단면에 대한 2차원 비선형 동적 해석을 수행하여 댐마루의 침하량을 계산하였다. 입력지진파의 지진강도와 지진규모 등의 영향을 복합적으로 고려하기 위하여 20개의 계측기록을 해석에 사용하였다. 수치해석으로 계산된 결과를 바탕으로 댐마루 침하량을 예측하기 위해 지진파의 최대지반가속도, 최대지반속도, Arias Intensity, 지진규모와의 상관관계를 도출하였다. 평가 결과, 최대지반가속도에 추가적인 변수를 사용할 경우, 상관성이 크게 향상되는 것으로 나타났다.