• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.1-13
• /
• 2004

It is recently well recognized that the technique for the one-sided stress wave velocity measurement in structural materials provides measurement in structural materials provides valuable information on the state of the material such as quality, uniformity, location of cracked or damaged area. This technique is especially effective to measure velocities of longitudinal and Rayleigh waves when access to only one surface of structure is possible. However, one of problems for one-sided stress wave velocity measurement is to get consistent and reliable source for the generation of elastic wave. In this study, the laser based surface elastic wave was used to provide consistent and reliable source for the generation of elastic wave into the materials. The velocities of creeping wave and Rayleigh wave in materials were measured by the one-sided technique using laser based surface elastic wave. These wave velocities were compared with bulk wave velocities such as longitudinal wave and shear wave velocities to certify accuracy of measurement. In addition, the mechanical properties such as poisson's ratio and specific modulus(E/p) were calculated with the velocities of surface elastic waves.

• 비파괴검사학회지
• /
• 제24권6호
• /
• pp.559-565
• /
• 2004

원주형 기공(SDH: side-drilled hole)의 초음파 산란장 해석을 두 가지 방법으로 수행하였다. 근사해석법인 Kirchhoff 근사법과 변수분리에 의한 엄밀해법으로 구한 원거리 산란진폭 식을 제시하고 시간영역에서 그 결과를 서로 비교하였다. 수직횡파(SV)의 SDH 입사를 고려하였으며, 원거리 산란 진폭을 주파수와 시간영역에서 각각 구하였다. 엄밀해법은 직접 산란파뿐만 아니라 잠행성 파를 나타내었으며, Kirchhoff 근사법은 잠행성 파를 예측하지 못하는 젓을 제외하고 엄밀해의 결과와 잘 일치하였다. 수침, 펄스-에코 시험법에서 SDH의 수신 신호 응답을 예측할 수 있는 두 가지 측정모델을 소개하였고, 수직 횡파가 45도로 입사할 때 지름 1mm SDH의 수신신호를 계산하고 그 결과를 실험과 비교하였다.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.213-218
• /
• 2015

A novel body-worn spiral monopole antenna is presented. The antenna consists of a ground plane and a spiral monopole. The antenna was designed for Ear-to-Ear (E2E) communication between In-the-Ear (ITE) hearing instruments at 2.45 GHz and has been simulated, prototyped, and measured. The antenna yielded a measured and simulated E2E path gain at 2.45 GHz of -82.1 dB and -85.9 dB, respectively. The radiation pattern of the antenna when mounted in the ear is presented and discussed.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.412-418
• /
• 1999

기하학적 균일 회절 이론 (Uniform Geometrical Theory of Diffraction)을 이용하여 옵\ulcorner 파라볼릭 안테나의 산란 특성을 분석하였다. 먼저 파추적법(Ray Tracing)에 의하여 음영경계를 나눈후, 각 영역에 존재하는 반사파와 회절파를 기하학적 균일 회절 이론을 이용해 구하였다. 또한, 옵\ulcorner 파라볼릭 안테나의 모서리(edge)의 형태가 전자파의 산란 특성에 미치는 영향을 알아보기 위해 knife 모서리인 경우와 원형 캡을 부착한 경우를 분석하여 비교하였다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.23-30
• /
• 2003

It is very important to detect and evaluate the surface or subsurface flaws because of their influences on mechanical properties of materials. Rayleigh wave and creeping wave are commonly used for the detection of surface and subsurface flaws. These techniques, however, have following problems. Each amplitudes are remarkably affected by the surface condition and evaluation of echo pattern is usually difficult because shear wave mode propagate in the material at the same time. On the other hand, surface SH-wave which is horizontally polarized shear wave traveling along near surface layer is an attractive technique for the surface or subsurface material characterization and this technique is useful to solve the problems mentioned above. In this paper, The stability and transmission coefficient of SH waves through a viscous fluid layer is theoretically studied and simulated. Its results agreed well with the theoretical expectation for the experimental verification. These experimental results show that viscosity of couplants, thickness of couplant and surface roughness are closely related to transfer efficiency in surface SH angle beam method.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권3호
• /
• pp.136-149
• /
• 2016

Green water impact occurs frequently on offshore platform due to waves with a height greater relative to the freeboard of the structure. This phenomenon exerts a large impact load on the deck. In this paper, offshore platform models with green water protectors of various shapes were fixed to the center of a 3D wave tank to measure the impact pressure acting on the various points on deck and protectors. The impact pressure distribution differed depending on the protector shape, and various patterns of wave creeping up the protector were observed. The protector shape that exerted the lowest pressure impact on the deck will be useful in the deck design of offshore platform, and the model test results will be expected to be used for designers to select the best protector form.