• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.1-10
• /
• 1999

The engine exhaustive valve became essential as the important element. The dissimmilar welding method of exhaustive valve head to stem was asked for manufacturing the engine exhaustive valve, for which the electric resistance are welding has been conventionally used, resulting in poor quality of the welded joint. In this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld qudlity(such as strength and toughness) evaluation technique by acoustic emission for friction welding of the engine exhaustive valve(SUH3-SUH35 dissimilar steels) were perfomed. The high temperature(500, 500, 600$^{circ}$C) creep properties prediction of the friction welded joint of SUH3-SUH35 was investigated relating to the initial strain meethod(ISM) as a new approach, resulting in obtaining an experimental equation of creep life prediction.

• Geomechanics and Engineering
• /
• 제38권2호
• /
• pp.191-203
• /
• 2024

One of the issues with clayey soils, particularly those with significant quantities of organic matter, is the creep settling problem. Clay soils can be strengthened using a variety of techniques, one of which is the use of stone columns. Prior research involved foundation loading when the soil beds were ready and confined in one-dimensional consolidation chambers. In this study, a particular methodology is used to get around the model's frictional resistance issue. Initially, specimens were prepared via static compaction, and they were then re-consolidated inside a sizable triaxial cell while under isotropic pressure. With this configuration, the confining pressure can be adjusted, the pore water pressure beneath the foundation can be measured, and the spacemen's lateral border may be freely moved. This paper's important conclusions include the observation that secondary settlement declines with area replacement ratio. Because of the composite ground's increasing stiffness, the length to diameter ratio (l/d) and the stone column to sample height ratio (Hc/Hs) both increase. The degree of improvement varies from 12.4 to 55% according to area replacement ratio and (l/d) ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.141-145
• /
• 1996

The primary purpose of this study is to investigate reusal techniques of by-product produced the combined heat power plant in the construction field, which may contribute to the savings of construction materials and the conservation of enviornment. This study is compared and evaluated by testing the chemical resistance, adiabatic temperature rising test, creep and drying shrinkage. As the result of the study, the following conclusions are derived : (1) hydration heat of the fly ash concrete is less than the plain concrete in adiabatic temperature rising test, (2) the fly axh concrete (FA 30%) is similar to the plain concrete in the chemical resistamce, (3) the fly ash concrete (FA 10, 30%) is similar to the plain concrete in drying shrinkage, but the fly ash concrete (FA 50%) is highly increased, (4) the fly ash concrete (FA 30%) is less than the plain concrete in creep test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.308-314
• /
• 1997

Shrinkage and creep are the fundamental properties of concrete. These long term deformations can be seen as bothersome(increased deflection) or can be seen as reduction of compressive stress of prestressed concrete. Steel fibers advance the mechanical properties of concrete:tensile strength, ductility, flexural strength, fracture toughness, and post-cracking resistance, etc...Silica fume is pozzolanic material which combines with hydrated lime to generate silicate materials which increase the compressive strength and reduce somewhat the creep of concrete. This paper is the result of the long-term deformation by silica fume and steel fibers with varying percentages.

• 한국산림과학회지
• /
• 제112권3호
• /
• pp.382-392
• /
• 2023

최근 기후변화와 지질환경변화로 인해 산지토사재해의 발생 빈도가 급증하는 경향이 보고되고 있다. 최근 국내에서 땅밀림이 빈번하게 발생하고 있는 만큼, 땅밀림지의 체계적이고 효율적인 복구 및 관리가 필요하다. 본 연구는 경기도 양평군 개군면 자연리 산 4-1에 발생한 땅밀림에 대하여 물리탐사기법을 통해 재해취약성을 파악하고, 파괴 지반의 전반적 지질구조를 규명하여 안정성을 검토하는 것이 목적이다. 또한, 시추조사도 함께 실시하여 측정한 데이터의 신뢰성을 검증하였다. 연구 결과, 토사층과 풍화대의 상부에 저비저항 이상대가 분포하며, 이 구간은 탐사측선 50-120 m 구간으로 땅밀림현상의 주요 지시자인 인장균열이 관찰되는 연경도가 낮은 땅밀림구역으로 확인되며, 토사층 내에 불연속면 잔존 가능성을 추정한 후, 활동연약대를 안정시키는 복구방법을 강구하였다. 따라서 국내 현실에서 땅밀림 위험지를 파악하여 땅밀림 발생 징후에 대한 지속적인 모니터링을 통해 경제적, 사회적 피해를 줄일 수 있는 대책마련을 위한 연구가 필요하다고 사료된다.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.280-286
• /
• 2006

As a way to expand electric capacity in conductor with electric power demand, STACIR/AW (Super Thermal-resistant Aluminum-alloy Conductors Aluminum-clad Invar-Reinforced) conductor which has high electric current and heat resistance characteristics have been developed. STACIR/AW power line is mechanical composite wire composed of steel cores for dip control and aluminum conductors for sending electric current. Recently, to ensure stable operation and prediction of wire life span of STACIR/AW conductor, a heat property of STACIR/AW conductor have been investigated. In the present work, a change of essential property with long term-heat exposure of STACIR/AW conductor and its structure material, INVAR wire and Al conductor, have been investigated. INVAR/AW is approximately $3.2\;{\mu}m/m^{\circ}C$. thermal expansion coefficient of INVAR/AW wire increases with time of heat exposure. the thermal expansion coefficient of INVAR/AW is markedly influenced by heat and mechanical treatment. creep rate(0.242) of STACIR/AW $410\;mm^2$ conductor at room temperature is much higher than that(0.022) at $210\;^{\circ}C$ STACIR/AW $410\;mm^2$ conductor has minimum creep rate at operating temperature. To lower creep rate with increase temperature is more unique characteristics in STACIR/AW. It is expected that STACIR/AW turned its tension to INVAR/AW at the transition temperature. at room temperature, the tension apportionment of INVAR/AW in STACIR/AW is about $50\;\%$. but whole tension of STACIR/AW is placed on the INVAR/AW alone of core metal above transition temperature.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권2호
• /
• pp.47-53
• /
• 2014

이 연구에서는 중소지간 합성형 강거더교량에 대한 신뢰성 해석을 위해 강거더와 콘크리트슬래브의 강성을 토대로 처짐을 고려한 한계 함수를 구축하여 신뢰성해석을 수행하였다. 확률적 하중과 저항모델을 통해 처짐을 예측하기 위해 계산에 필요한 변수들을 확률변수로 고려하였다. 강재의 부식에 의한 단면의 감소, 그리고 콘크리트의 크리프는 합성형교의 처짐에 많은 영향을 미친다. 따라서 이 연구에서는 AASHTO LRFD 기준으로 설계된 교량에 대해 시간에 따른 변수를 고려하여 강재단면의 감소와 크리프의 영향을 통계적 모델에 반영하기 위해 몬테-카를로 시뮬레이션 기법을 이용하였으며, 처짐과 사용성을 고려하여 다양한 지간과 거더간격을 가진 교량에 신뢰성 해석을 수행하였다. 그 결과, 장지간 교량의 경우, 단지간 교량과 비교해 보았을 때 상대적으로 크리프와 강재단면감소의 처짐에 대한 영향이 작았으며, 이에 반해 단지간 거더 교량의 경우 크리프의 진행에 따라 처짐에 많은 영향을 미친다는 것을 알 수 있었다.

• 콘크리트학회지
• /
• 제4권1호
• /
• pp.107-118
• /
• 1992

본 연구는 고강도 고내구성이면서 신뢰성이 높은 폴리머 함침 탄소섬유보강 시멘트복합에의 개발 응용을 위한 여러 가지 특성을 검토하기 위하여, 복합체는 PAN계 및 Pitch계 탄소섬유, 조강포틀랜드 시멘트, Silica Powder 및 폴리머 함침재를 사용하여 제조하였고, 배합조건별, 재령별, 그리고 양생조건별로 역학적특성, 동결융해저항성 및 장기변형특성에 관한 실험연구를 행하였다. 연구결과, CFRC의 Flow값은 CF혼입율 증가에 따라 거의 직선적으로 저하하였고, 폴리머 함침 CFRC의 압축 인장 휨강도는 CF혼입율 증대에 따라 오토클래브 양생 및 기건양생의 경우에 비하여 현저히 증대하였으며, 또한 월등히 높은 강도를 나타내었다. 그리고, 인자응력-변형관계 및 휨응력-처짐관계는 기건양생 및 오토클래브 양생의 경우 연성적인 비선형을 나타낸 데 비하여 폴리머함침의 경우는 거의 직선적 으로 변화하였고, 동결융해저항성, 건조수촉변형특성 및 내크리프 특성도 다른 양생 방법의 경우에 비하여 크게 개선됨을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.41-44
• /
• 1991

Time dependent analysis of prestressed concrete beams subjected to pure torsion is studied. The present theory covers the behavior from the service load range to the ultimate stage. The tensile resistance of concrete is appropriately considered. The biaxial stress effects due to diagonal cracking are also taken into account. The time dependent aging, creep and shringkage effects are modelled by employing the equivalent nonmechanical torque concept. The present theory allows more accurate prediction of the service load behavior of pretressed concrete members.

• Steel and Composite Structures
• /
• 제3권2호
• /
• pp.75-95
• /
• 2003

A numerical model is presented to simulate the mechanical behaviour of composite steel and concrete columns taking into account the interaction between the hollow steel section and the concrete core. The model, based on displacement finite element methods with an Updated Lagrangian formulation, allows for geometrical and material non linearities combined with heating over all or a part of the section and column length. Comparisons of numerical calculations made using the model with 33 fire resistance tests show that the model is able to predict the fire resistance, expressed in minutes of fire exposure, of composite columns with a good accuracy.