• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.715-720
• /
• 2006

This research investigates injury values and vehicle deformation for vehicle frontal crash compatibility. To investigate compatibility in an individual case, it is possible to impact two vehicles and evaluate the injury values and deformations in both vehicles. In this study, four tests were conducted to evaluate compatibility. A large and mini vehicle were subjected to a frontal car-to-car crash test at a speed of 48.3 km/h with an offset of 40%. An inclination car-to-car crash test using the large and small vehicle were conducted at 30 km/h at a $30^{\circ}$ angle. The results of the 48.3 km/h, car-to-car frontal crash revealed extremely high injury values on the chest and upper leg of the Hybrid III 50% driver dummy with seatbelt in the mini vehicle compared to the large vehicle. For the 30 km/h, car-to-car inclination crash, however, injury values in the small vehicle were 1.5 times higher compared to the large vehicle.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.175-186
• /
• 2010

기초에 강결되어 도로변에 노출된 각종 지주는 정면충돌 뿐 아니라 측면충돌에 특히 위험하다. 클립형 단부분리장치를 갖는 지주는 정면충돌에 효과적이고 다방향으로 분리가 가능하기 때문에 측면충돌에도 효과적이다. 본 논문은 강결된 지주의 측면충돌에 대한 위험성을 보이고 클립형 단부분리장치를 갖는 지주의 충격완화 효과를 보이기 위하여 측면충돌실험을 실시하고 그 결과를 분석 정리한 것이다. 이를 위하여 미국의 NCHRP Report 350을 기반으로 측면충돌의 기준을 제시하고 D101.6mm(t=4.2mm)의 지주가 강결된 경우와 클립형 단부분리장치로 연결된 경우에 대하여 820kg의 소형차로 충돌속도 50km/h의 측면충돌실험을 실시하였고 단부장치의 저속분리가 가능한가를 35km/h의 측면충돌실험으로 확인하였다. 강결지주는 차량의 과다한 변형 및 전복, 안전지수 측면에서 측면충돌에 치명적이지만 클립형 단부분리장치로 기초에 연결된 경우 충돌피해를 크게 줄일 수 있음을 확인하였다.

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.72-81
• /
• 2011

In the present day, the needs of new steel for lightweight car-body have been increased in the automotive industry. however, the resistance spot welding is difficult to apply to the new steel because of the narrow weld current range and defects. As the solutions to these problems, adhesive bonding process is proposed. Adhesive bonding which reduce noise and vibration can be applied to joining the new steel. In this study, crash tests of b-pillar applied the resistance spot welding, structural adhesive bonding, the mixture of the structural adhesives and resistance spot welding were performed. And FEM crash model for b-pillar applied the structural adhesive bonding was developed. The results of experiment and analysis on b-pillar crash test were compared to verify the validity.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.31-38
• /
• 2020

This study is to develop the prediction model for the HIC15 in frontal vehicle crash tests. The 28 frontal impact test results of the MY2019 and MY2020 USNCAP are utilized. The metrics for evaluating the crash pulse severity such as moving average acceleration, Restraint Quotient (RQ) and ride-down efficiency are reviewed to find out whether the metrics can predict the HIC15. It is observed that the R² values based on the linear regression of all pairs between the existing metrics and the occupant injuries such as the HIC15, 3 ms chest g's and chest deflection are very low. In this study, using the vehicle crash pulses, the linear regression model for estimating the HIC15 is developed. The vehicle crash pulse is splitted seven 10 ms intervals in 70 ms after impact for extracting the average accelerations in each intervals. The prediction model can predict effectively not only the HIC15 but also the maximum head g's, chest deflection and 3 ms chest g's of 13 vehicles out of 28 vehicles.

• 자동차안전학회지
• /
• 제9권2호
• /
• pp.20-25
• /
• 2017

KNCAP is a program to evaluate the automobile safety, providing consumer vehicle safety assessment results. The safety evaluation tests are Frontal Impact, Offset Frontal Crash, Side Crash, Side Pole Crash, Rear Impact. This is the study of the offset frontal impact safety evaluation. Currently, IIHS is performing a small overlap test. NHTSA plans to implement the oblique moving deformable barrier test. Euro-NCAP plans to implement a mobile frontal impact test. Simulation is used to compare occupant behavior and injury. We have investigated whether the introduction of the test at KNCAP is necessary. The dummy model used in the simulation was the 50th percentile male Hybrid III dummy.

• 수산해양기술연구
• /
• 제41권4호
• /
• pp.289-295
• /
• 2005

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the manoeuvrability of own ship. The actual manoeuvering characteristics of ship can be adequately judged from the results of typical ship trials manoeuvres. Author carried out sea trials based full scale for turning test, zig-zag test, spiral tests and crash-stop test at actual sea going condition. The turning circle manoeuvres were performed on starboard and port sides with $35^{\circ}$ rudder angle at the service speed, and Zig-zag procedures were performed on both sides with $10^{\circ}$ and $20^{\circ}$ rudder angle respectively. Spiral tests were carried out on the both sides and crash stop test was also carried out. The results from tests could be compared directly with the standards of manoeuverability of IMO and consequently the manoeuvring qualities of the ship is fully satisfied with its.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.58-63
• /
• 2013

It is very difficult to evaluate the impact speed, who caused the accident and what the injury risk of the vehicle occupants was from the outcome of the accident. That's the main reason why there are so many insurance fraud related to vehicle accident. In this study, a vehicle crash accident suspected to an insurance fraud had been reconstructed to evaluate crash speed and the relationship between the crash accident and passenger injury risk. To do this, the scene was reconstructed based on accident investigation report and three vehicle crash tests were done at 27kph, 37kph and 70kph. The crash speed of 27kph and 37kph were chosen based on the damaged vehicle and 70kph was chosen based on the driver's statement. Based on the damage of vehicle and dummy injury measure, impact speed is estimated around 20 to 30kph and the dummy measures show that the passengers are not seems to be severely injured in this speed range.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• 한국방재학회 논문집
• /
• 제9권2호
• /
• pp.23-30
• /
• 2009

충격흡수시설은 주행차로를 벗어난 차량이 도로상의 고정된 구조물과의 직접적인 충돌을 방지하도록 하기 위한 보호시설이다. 이러한 기능은 충돌차량이 안전하게 점진적으로 멈추도록 속도를 감소시킴으로써 이루어진다. 기존의 일반적인 충격흡수시설에는 이러한 기능을 수행하기 위해서 다음의 두 가지 개념 중 하나가 적용된다. 첫 번째 개념은 파괴 또는 소성변형이 가능한 재료에 의해 충돌차량의 운동에너지를 흡수하는 것이고, 두 번째 개념은 충돌차량의 운동량을 차량의 이동경로에 놓인 소모성 재료의 질량체에 전달하는 것이다. 일반적으로 첫 번째 개념을 이용한 충격흡수시설은 압축(비관성) 충격흡수시설로 분류되고, 두 번째 개념을 이용한 충격흡수시설은 관성 충격흡수시설로 분류된다. 본 논문의 목적은 위에서 언급한 두 가지 개념을 동시에 적용한 압축형 충격흡수시설의 개발이다. 실물차량 충돌시험을 최소화 할 수 있도록 관성 에너지와 마찰 에너지 소산을 고려한 예비설계 가이드를 수립하고 충격흡수시설 개발을 위한 컴퓨터 시뮬레이션을 수행하였다. 시뮬레이션을 위하여 도로안전시설물 해석에 가장 많이 사용되는 LS-DYNA를 이용하였다. 개발된 충격흡수시설은 국내지침 CC2급의 다양한 충돌조건에 대한 성능 평가 기준을 만족하였다.

• 한국전산구조공학회논문집
• /
• 제25권1호
• /
• pp.51-56
• /
• 2012

회전익 항공기에 광범위하게 적용되고 있는 내충격성 연료셀은 항공기 추락 시 탑승자의 생존성 향상에 크게 기여하고 있다. 미육군에서는 항공기 추락 후 화재에 의한 인명손실을 원천적으로 방지하기 위해 군용 회전익기 역사의 초기 단계부터 연료셀 고유의 내충격성에 관련된 군사규격을 제정하여 적용해 왔다. 국외 전문제작 업체들은 장기간의 경험에 의존하여 연료셀을 개발하고 있으며, 충돌충격시험에 따른 시행착오의 결과를 설계 및 제작과정에 재반영하고 있다. 이러한 연료셀 충돌충격시험은 시편자체의 제작비용 및 준비기간이 상당히 소요되므로, 설계 초기단계부터 충돌충격시험에 대한 일련의 수치적 모사를 통해 실물에 의한 시행착오의 가능성을 최소화해야 한다. 본 연구에서는 충돌모사 프로그램인 Autodyn으로 연료셀 충돌충격시험에 대한 다수의 수치해석을 수행, 등가응력 분석을 통해 적절한 설계변수를 선정하였다. 또한 인공신경망과 모의풀림 방법을 연동시켜 연료셀 형상을 내충격성능 측면에서 최적화하였다.