• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.234-241
• /
• 2002

In this study, the car crash analysis that simulates the crushing behavior of car forestructure during a frontal impact is carried out. The analysis model for front impact of a car consists of the lumped mass and the spring model. The characteristics value of masses and springs is obtained from the static analysis of a target car. The deceleration-time curve obtained from the simulation are compared with NCAP test data from the NHTSA. They show a good agreement with frontal crash test data. The deceleration-time curve of passenger compartment is classified into 3 stages; beginning stage, middle stage, and last stage. And the behavior of masses at each stage is explained. The effect of stiffness variation on deceleration of passenger compartment is resolved. The maximum loaded peak-time of torque box and dash is the main factor to control the passenger compartment's maximum deceleration.

• 연구논문집
• /
• s.32
• /
• pp.85-94
• /
• 2002

Even in the world wide automobile companies where a few simple modules are put into practical use, the front subframe modules of which performances of durability, NVH and crash are significantly important are under planing. In this study, design technology for the automobile front subframe module, which consists of an engine, a transmission and steering parts, structural components (frame, upper arm, lower arm and brake etc.) and rubber components(engine mount, axle mount and rubber disc etc.), was developed. A FEM-based analytical approach was used to evaluate the multiaxial high cycle fatigue damage of the front subframe module. Strain-life fatigue database system and expert system for fatigue properties of welded materials were developed. Stiffness values of the various rubber bushes mounted on the front subframe were evaluated by experimental method and FEM. TWB(Tailor Welded Blank) technology was applied to forming the cross member of the front subframe. Performance evaluations in relation to NVH and crash were conducted by using CAE technologies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.561-565
• /
• 2011

The structural vehicles are steel members of square or circle tube with definite shape. These members support various components and absorb impact energy to protect passengers during accidentswhen crash happen. Structural members need to be lightweight and stable. In this study, we do an impact simulation of a CFRP square member using finite element analysis program Ls-Dyna in order to predict fracture shape and energy absorb feature of CFRP member. Also, we make square member shape of CFRP and do an impact experiment. We compare the analytical and experimental results and consider the fracture shape and energy features of CFRP members.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.2
• /
• pp.6-12
• /
• 2018

Optimized section shape of aluminum bumper backbeam for enhancing the front high speed crashworthiness was investigated. Front body analysis model of a convertible vehicle was built up and parameter studies were carried out with changing the inner rib shape and the section thickness distribution. First an inner rib shape displaying most efficient structural performance was selected. Next, for the selected section the effect of section thickness combination was examined. Also, a light weighed backbeam section displaying crash performance over the current design was suggested. Finally RCAR front low speed impact analyses were carried out for the optimized models.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.41-49
• /
• 2007

More diversified and strengthened safety regulations require higher safety vehicle with less weight. The structural foam can play a role for restraining section distortion of main body members undergoing bending collapse at vehicle crash. In this study, using structural foam modeling technology, validated in previous work, the bending collapse characteristics were evaluated for two types of circular and actual vehicle body frame sections. With changing the foam filling method, outer panel thickness and section shape, load carrying capability and absorbed energy were observed. The results indicate valuable design strategy for effectively elevating bending collapse performance of body members with foam filled.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.202-205
• /
• 2004

A bumper comprises a bumper face, a bumper beam for distributing the load from the impacts applied to the bumper face and reinforcing the bumper, an absorber member interposed between the bumper face and the bumper beam, and a pair of bumper stays which secure the bumper beam to the vehicle body. A conventional bumper stay structure is assembled into several stamped parts, so several processes are needed and the structure is complicated. In this study the bumper stay is applied to the tubular hydroforming which is known to have several advantages such as the reduction of the number of the process and the part weight. The thickness distribution of the tube is mainly considered to evaluate the hydro-formability and the shape of the tube is determined.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2003

By choosing Multicast for transmission of educational contents in the Remote Educational System, we can reduce the server load and increase network bandwidth utilization. We design and implement Multicast Middleware for the Remote Educational System in this paper. There are three characteristics in this Multicast Middleware: 1) Through Centralized Multicast Group Management for passive members, it allows a host to make multicast group, which is composed of receivers, called Group Member and who are chosen by the host, called group Maker. Because, all groups are created by the Group Maker in Centralized Group Management, Group Member's join action will be passive 2) Maintenance and recovery of multicast group information in order to restore from exception and crash; the maintenance and recovery mechanism of Group Maker is distinct from that of Group Member. 3) The mechanism which enables to transmit large size multimedia data through multicasting and remove additional copy operation through shared buffer. Fragmentation/de-fragmentation for large data delivery results in additional copy operation in user level. But by using user level shared buffer, it can be done without user Bevel copy operation. By applying to Remote Educational environment which consists of 30 PCs and Fast Ethernet, we can examine the efficiency of this middleware, which can transmit 18frames/sec movie which resolution 320 $\times$ 120 pixels, 128Kbps encoded sound data and some text data.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.126-136
• /
• 2013

Aircraft accidents these days, following the mega sizing trend of the aircraft, result in enormous losses of human lives apart from those of property, which cannot be replaced by any means. As most recently, in April 20, 2012, a Boeing 737 passenger plane departed Karachi on an augural flight to Islamabad, Pakistan, crashed close to an express highway on final approach, all 121 passengers and 6 crew members were killed. As such a large number of fatalities have been recorded in aircraft accidents while accident investigation results show that more than 95% of aircraft accidents are now survivable. There are three basic stages in surviving the aircraft accident: surviving the crash impact, the evacuation process and the hostile post evacuation environmental elements. These stages require the cabin crew's expeditious and appropriate actions on the basis of systematic and thorough cabin safety training in order to increase occupants' survivability, along with the passengers' preparedness. In this aspect, this paper examines the issues acting as the impediments to the passenger survival in inflight emergency situations, that are the deficiencies with cabin crew safety training, related performances and the shortcomings in passengers' knowledge on inflight safety information, leading to their inappropriate responses to emergency situations. These issues are analyzed and the root causes are identified, suggesting the resolving countermeasures.

• Journal of Platform Technology
• /
• v.11 no.6
• /
• pp.47-55
• /
• 2023

With the goal of ensuring the safety of wheelchair users, this study was conducted using finite element analysis, focusing on the development of a platform that can be used to evaluate safety during the design stage. Safety evaluation criteria for wheelchairs used in vehicles are defined in ANSI/RESNA WC19 and ISO 7176-19. Based on these standards, finite element analysis was performed to assess the sectional forces of each component of the wheelchair and sensitivity analysis was conducted based on the specifications. These results were used to derive equivalent composite loads for the wheelchair's main components, determine the necessary sectional specifications for these main components in the wheelchair design phase, and investigate the process of safety assessment verification. The study showed that member forces vary with changes in the cross-sectional values of the wheelchair frame's main components, with the front and rear lower members, as well as the rear upper and lower members, requiring the highest cross-sectional values for safety design. This study offers a proactive method for evaluating safety in the wheelchair design stage, and in future research, we plan to develop a safety evaluation platform based on these results.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.345-366
• /
• 2018

Article 37 of the International Convention on Civil Aviation requires that rules should be adopted to keep in compliance with international standards and recommended practices established by ICAO. As SARPs are revised annually, each ICAO Member State needs to reflect the new content in its national aviation Acts in a timely manner. In recent years, data-driven international standards have been developed because of the important roles of aviation safety data and information-based legislation in accident prevention based on human factors. The Safety Management System and crew Fatigue Risk Management Systems were reviewed as examples of the result of data-driven rulemaking. The safety management system was adopted in 2013 with the introduction of Annex 19 and Chapter 5 of the relevant manual describes safety data collection and analysis systems. Through analysis of safety data and information, decision makers can make informed data-driven decisions. The Republic of Korea introduced Safety Management System in accordance with Article 58 of the Aviation Safety Act for all airlines, maintenance companies, and airport corporations. To support the SMS, both mandatory reporting and voluntary safety reporting systems need to be in place. Up until now, the standard of administrative penal dispensation for violations of the safety management system has been very weak. Various regulations have been developed and implemented in the United States and Europe for the proper legislation of the safety management system. In the wake of the crash of the Colgan aircraft, the US Aviation Safety Committee recommended the US Federal Aviation Administration to establish a system that can identify and manage pilot fatigue hazards. In 2010, a notice of proposed rulemaking was issued by the Federal Aviation Administration and in 2011, the final rule was passed. The legislation was applied to help differentiate risk based on flight according to factors such as the pilot's duty starting time, the availability of the auxiliary crew, and the class of the rest facility. Numerous amounts data and information were analyzed during the rulemaking process, and reflected in the resultant regulations. A cost-benefit analysis, based on the data of the previous 10 year period, was conducted before the final legislation was reached and it was concluded that the cost benefits are positive. The Republic of Korea also currently has a clause on aviation safety legislation related to crew fatigue risk, where an airline can choose either to conform to the traditional flight time limitation standard or fatigue risk management system. In the United States, specifically for the purpose of data-driven rulemaking, the Airline Rulemaking Committee was formed, and operates in this capacity. Considering the advantageous results of the ARC in the US, and the D4S in Europe, this is a system that should definitely be introduced in Korea as well. A cost-benefit analysis is necessary, and can serve to strengthen the resulting legislation. In order to improve the effectiveness of data-based legislation, it is necessary to have reinforcement of experts and through them prepare a more detailed checklist of relevant variables.