• Title/Summary/Keyword: Craniofacial pattern

Search Result 100, Processing Time 0.019 seconds

STUDY ON THE KOREAN CRANIOFACIAL SKELETAL PATTERN BY COUNTERPART ANALYSIS (구조적 대응체 분석법(Counterpart Analysis)에 의한 한국인의 악안면 두개 골격형태에 관한 연구)

  • Sohn, Byung-Wha;Lee, Yoon-Jeong;Yang, Choon-Sik
    • The korean journal of orthodontics
    • /
    • v.30 no.5 s.82
    • /
    • pp.509-519
    • /
    • 2000
  • Enlow's counterpart analysis explains the complex with anatomic and developmental characteristics where craniofacial aspect of individuals has been developed. The analysis does not compare individual measurement with the normal value from the average of majority but analyzes by comparison of values that each individual has. This study was to clarify the Korean craniofacial skeletal pattern using Enlow's counterpart analysis considering the fact that the craniofacial skeletal pattern has racial and regional variations. This research will be helpful in the future for growth research and research of the orthognathic surgery. For this study, the samples were consisted of 100 Korean adult subjects(50 males and 50 females) who had normal occlusion and pleasing face. Measurement points and lines were established using Enlow's counterpart analysis and they were statistically evaluated. The results indicated that : 1. The average angle between PCF and PMV was $38.54^{\circ}$ in males and $38.43^{\circ}$ in females, and the average Wits' appraisal was -2.51 in males and -2.3 in females. The ramus alignment(R4) was 1.89 in males and 2.36 in females. 2. It shows that females have a longer ramus than the PCF compared to the males, because there was a significant difference in Ramus/PCF horizontal dimensions (Skeletal A3-B3) between female and male subjects 3. It shows that males have a longer mandibular corpus than the maxilla compared to the females, because there was a significant difference in Maxillary/Mandibular arches(Skeletal A4-B4) between male and female subjects 4. In cranial floor+maxilla/ramus+corpus at A and B points(Al-Bl), which represents difference in total horizontal length between the maxilla and mandible, there was no significant difference between males and females. In conclusions, compared to Caucasian, Korean have more depressed midface, prognathic mandible, and ramus that rotates inferioposterior. Also, we observe that Korean women have target ramus posterior cranial base, as compared with Korean men. Consequently, the total length of maxilla and mandible does not show any difference, because man's mandible is longer than maxilla in comparison with woman's one.

  • PDF

Polyostotic Fibrous Dysplasia of Cranio-Maxillofacial Area (두개 악안면 부위에 발생한 다골성 섬유성이형성증)

  • Han Jin-Woo;Kwon Hyuk-Rok;Lee Jin-Ho;Park In-Woo
    • Imaging Science in Dentistry
    • /
    • v.30 no.2
    • /
    • pp.149-154
    • /
    • 2000
  • Fibrous dysplasia is believed to be a hamartomatous developmental lesion of unknown origin. This disease is divided into monostotic and polyostotic fibrous dysplasia. Polyostotic type can be divided into craniofacial type, Lichtenstein-Jaffe type, and McCune-Albright syndrome. In this case, a 31-year-old female presented spontaneous loss of right mandibular teeth before 5 years and has shown continuous expansion of right mandibular alveolus. Through the radiographic view, the coarse pattern of the mixed radiopaque-lucent lesion was seen on the right mandibular body, and there was diffuse pattern of the mixed radiopaque-lucent lesion with ill-defined margin in the left mandibular body. In the right calvarium, the lesion had cotton-wool appearance. Partial excision for contouring, multiple extraction, and alveoloplasty were accomplished under general anesthesia for supportive treatment. Finally we could conclude this case was polyostotic fibrous dysplasia of cranio-maxillofacial area based on the clinical, radiologic finding, and histopathologic examination.

  • PDF

Study on Characteristics of Maxillofacial Growth in Class III Malocclusion Patients by Cranial Base Growth (3급 부정교합 환자에서 두개저 성장 양상에 따른 악골 성장 특성에 관한 연구)

  • Son, Do-Kyoung;Park, Sung-Won;Lee, Jae-Min;Kim, Eun-Ja;Choi, Sang-Mun;Kim, Young-Woon;Choi, Mun-Gi;Oh, Sung-Hwan
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.33 no.6
    • /
    • pp.483-489
    • /
    • 2011
  • Purpose: Craniofacial structure form results from the adaptation to morphologic and functional changes in their neighboring structures for a mutual balance. The purpose of this study is classification of maxillomandibular complex growth pattern follow by cranial base growth pattern. And this study is identifying the correlation between maxilla-mandibular complex growth pattern and orthodontic criteria. Methods: 142 Class III malocclusion patients had orthognathic surgery at Wonkwang University Dental Hospital during April 2004 to October 2010. Patients were divided into 4 groups and the correlation between cranial base and maxillomandibular growth patterns were evaluated. Results: There was a correlation between cranial base and maxillomandibular growth patterns. Positive relationships were found between the occlusal plane, Incisor mandibular plane angle, mandibular plane, positioning of pogonion and the saddle angle, indicating maxillary growth patterns. Negative relationships were found between SNA, SNB, maxillary incisor angle and saddle angle. Positive relationships were found between the ratio of the anterior and posterior cranium, positioning of pogonion and the percentage of cranial depth indicating mandibular growth patterns. Negative relationships were found between the occlusal plane, maxillary incisor angle, mandibular plane, mandibular angle and cranial depth. Conclusion: Cranial base and maxillofacial growth patterns were correlated and the classification should be adjusted before orthognathic surgery.

MIDFACIAL MEASUREMENT USING OCCLUSAL MAXILLARY CT AND SURGICAL IMPLICATIONS OF MAXILLARY OSTEOTOMIES (컴퓨터 단층촬영을 이용한 중안모 계측과 상악골 절단술에의 응용)

  • Choung, Pill-Hoon;Yoo, Chung-Kyu;Lee, Eun-Kyung;Suh, Je-Duck;Chung, Il-Hyuk
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.28 no.3
    • /
    • pp.222-228
    • /
    • 2006
  • Various methods have been used in the past to indirectly analyze the craniofacial region. Among these, the lateral and posterior-anterior cephalometircs are used for the evaluation of the dentofacial deformities. However, cephalometircs create inaccuracies because of the inherent enlargement and distortion of the image. The interpretation of cephalometric films is also problematic: the number of anatomic landmarks that can be identified accurately is limited, and the overlap of structures on a radiograph making locating these landmarks difficult. To overcome these problems, computed tomography(CT) has been recommended as an useful modality in the diagnosis, surgical planning, and follow-up of craniofacial anomalies. There is no significant enlargement or distortion of the image, overlap of structure, or tracing error. And the number of anatomic landmarks is vast. The purpose of this study was to examine the orbit and midfacial region using Occlusal Maxillary CT, consisted of slices parallel to the occlusal plane. Based on these CT scan, we provide the data that could be applied to monitor an individual patient's skeletal pattern and the guide to the maxillary osteotomy.

Mandibular arch orthodontic treatment stability using passive self-ligating and conventional systems in adults: A randomized controlled trial

  • Rahman, Norma Ab;Wey, Mang Chek;Othman, Siti Adibah
    • The korean journal of orthodontics
    • /
    • v.47 no.1
    • /
    • pp.11-20
    • /
    • 2017
  • Objective: This randomized controlled trial aimed to compare the stability of mandibular arch orthodontic treatment outcomes between passive self-ligating and conventional systems during 6 months of retention. Methods: Forty-seven orthodontic patients with mild to moderate crowding malocclusions not requiring extraction were recruited based on inclusion criteria. Patients (mean age $21.58{\pm}2.94years$) were randomized into two groups to receive either passive self-ligating ($Damon^{(R)}$ 3MX, n = 23) or conventional system (Gemini MBT, n = 24) orthodontic treatment. Direct measurements of the final sample comprising 20 study models per group were performed using a digital caliper at the debonding stage, and 1 month, 3 months, and 6 months after debonding. Paired t-test, independent t-test, and non-parametric test were used for statistical analysis. Results: A significant increase (p < 0.01) in incisor irregularity was observed in both self-ligating and conventional system groups. A significant reduction (p < 0.01) in second interpremolar width was observed in both groups. Mandibular arch length decreased significantly (p = 0.001) in the conventional system group but not in the self-ligating system group. A similar pattern of stability was observed for intercanine width, first interpremolar width, intermolar width, and arch depth throughout the 6-month retention period after debonding. Comparison of incisor irregularity and arch dimension changes between self-ligating system and conventional system groups during the 6 months were non-significant. Conclusions: The stability of treatment outcomes for mild to moderate crowding malocclusions was similar between the self-ligating system and conventional system during the first 6 months of retention.

CEPHALOMETRIC MEASUREMENT ACCORDING TO SKELETAL MATURITY STAGE OF THE HAND AND WRIST (수완부골성숙단계에 따른 두부방사선계칙학적 연구)

  • Choi, Hae-Woon;Kim, Jae-Hyung
    • The korean journal of orthodontics
    • /
    • v.17 no.1
    • /
    • pp.135-148
    • /
    • 1987
  • To investigate the relationship between craniofacial growth and bone maturity of the hand wrist in normal occlusion, the author took cephalogram and handwrist radiogram of 391 students (male 192, female 199) and assessed the measurements of cephalogram according to skeletal maturity stages of the hand and wrist. In this study, four skeketal stages and 36 linear, angular measurements of the cephalometrics were selected. In hand-wrist X-ray the bones used to determine skeletal maturity were the middle phalanges of the third finger, and distal epiphysis of the radius. In cephalogram, the landmark used to measure the angle and length were N, S, Po., Ar., Go., Me., Gn., Pog., Point B, Point A, ANS, PNS, Or., U1, L1, U6, L6 etc.. The results were as follows, 1. The table of mean, standard deviation, p-value from measurements were made in each group and both sex. 2. The increased measurements according to skeletal maturity were anterior cranial bese length, posterior cranial base length, ramus height, anterior facial height, posterior facial height, L1 to mandibular plane (mm), facial plane angle. In contrast to, decreased measurements were genial angle, facial cnvexity and facial plane angle. 3. Denture pattern measurements (IMPA, FMIA, occlusal plane to Go-Gn, interincisal angle, U1 to SN plane, U1 to SN plane, U1 to facial plane, L1 to facial plane etc.) .had nothing to do with skeletal maturity. 4. Skeletal maturity had close relationship with craniofacial growth, but had little to do with tooth development.

  • PDF

Relationship between Joint Space and Craniofacial Morphology in Patients with Craniomandibular Disorders (두개하악장애환자에서 악관절강폭과 측모두부형태와의 관계에 관한 연구)

  • Myung-Seok Seo;Kyung-Soo Han;Min Shin
    • Journal of Oral Medicine and Pain
    • /
    • v.17 no.2
    • /
    • pp.63-73
    • /
    • 1992
  • This study was performed for the purpose of investigating the relation between width of temporomandibular joint space and craniofacial morphology in patients with CMDs. The subjects utilized here were aged from 16 to 63 years old and 19 male and 46 female. For the study, each patient was taken radiographs by Transcranial and Lateral Cephalographic projection and the films were traced with routine method. The measured items were anterior, superior, posterior joint space and relative condylar position to the deepest part of glenoid fossa in Transcranial film and items related vertical and/or horizontal growth in Cephalogram. The data were processed with SPSS/PC+ package for statistical analysis. The obtained results were as follows : 1. Anterior joint space in affected side were wider than that of unaffected side, but for superior and posterior joint space, the value of unaffected side were more than those of affected side. 2. Superior or posterior joint space of affected side were significantly correlated with items related vertical growth, such as ramus height, Jarabak ratio, FMA. From this, the following cold be proposed, the wider the joint space of superior or posterior aspect of affected side was, the more the patient showed growth pattern of counter clockwise. 3. Superior or posterior joint space of affected side were significantly correlated with items related horizontal growth, such as SNPo, NAPo, APDI and ANB. From this the following could be proposed, the wider the joint space of superior or posterior aspect of affected side was, the more the patient showed anterior displacement of mandible. 4. It would be proposed that the diagnositic value of superior and posterior joint space of affected side in transcranial radiograph was excellent.

  • PDF

Enlarged Lipogranuloma after Closed Reduction of Nasal Bone Fracture: A Case Report (비골골절 정복술 후 커진 지방육아종의 치험례)

  • Lee, Ji Won;Choi, Jae Il;Ha, Won;Yang, Wan Suk;Kim, Sun Young
    • Archives of Craniofacial Surgery
    • /
    • v.13 no.1
    • /
    • pp.63-67
    • /
    • 2012
  • Purpose: Lipogranuloma is the reaction of adipose tissue to various oils, paraffin, and other hydrocarbons injected into subcutaneous tissue for cosmetic or other reasons. The authors experienced a case of sclerosing lipogranuloma on the nasal dorsum. Methods: A 42-year-old female, without a history of the injection of any foreign materials, was admitted on our hospital for a painless, irregular, and firm mass located on her nasal dorsum with step-off deformity. It was considered that the mass had developed after augmentation rhinoplasty. The size of mass had been increased after closed reduction of nasal bone fracture. On April 2011, under general anesthesia, the mass was removed by open rhinoplasty technique. In addition, a pathologic examination was performed. After the mass extirpation, dermofat graft was performed for the correction of depression deformity. Results: The histopathological findings demonstrated a Swiss cheese pattern with variably-sized vacuoles, which corresponded to lipid removed with tissue processing, and variable foreign body giant cell reaction, fat necrosis, and hyalinized fibrous tissue. The pathologic diagnosis is lipogranuloma replacing nasalis muscle. It has been considered that sclerosing lipogranuloma is caused by nerve injury during augmentation rhinoplasty and the ointment used after the closed reduction of nasal bone fracture, which infiltrated through the injured mucosa. Conclusion: During the treatment of rhinoplasty or nasal bone fracture, the nerve injury or the ointment use can lead to lipogranuloma. Therefore, careful dissection for avoidance of the nerve injury and limited use of ointment seems to be helpful in decreasing incidence of lipogranuloma.

The effect of casein phosphopeptide amorphous calcium phosphate on the in vitro shear bond strength of orthodontic brackets

  • Park, Sun-Youn;Cha, Jung-Yul;Kim, Kyoung-Nam;Hwang, Chung-Ju
    • The korean journal of orthodontics
    • /
    • v.43 no.1
    • /
    • pp.23-28
    • /
    • 2013
  • Objective: The purpose of this study was to evaluate the effect of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on the shear bond strength (SBS) of brackets bonded to non-demineralized teeth with either phosphoric acid etching or self-etching primer. Methods: Sixty human premolars were randomly assigned to 1 of 4 treatment groups (n = 15 each): phosphoric acid etching (group 1); self-etching primer (group 2); CPP-ACP for 2 weeks + phosphoric acid etching (group 3), and CPP-ACP for 2 weeks + self-etching primer (group 4). After bonding of the maxillary premolar metal brackets, specimens were subjected to shear forces in a testing machine. Scanning electron microscopy was used to observe etching patterns on the enamel surfaces of all teeth. A 2-way analysis of variance was used to test for effects of CPP-ACP and etching system on SBS. Results: Significantly higher mean SBSs were observed in groups subjected to phosphoric acid etching (i.e., groups 1 and 3; p < 0.05). On the other hand, SBSs did not appear to be influenced by CPP-ACP (i.e., groups 3 and 4; p > 0.05). We observed a uniform and clear etched pattern on the enamel surface of the phosphoric acid etching groups. Conclusions: CPP-ACP does not significantly affect the SBS of orthodontic brackets bonded to non-demineralized teeth, regardless of which adhesive method is used to bond the brackets.

Factors Influencing Upper Airway Dimensions in Skeletal Class II Children and Adolescents: A CBCT Study (골격성 II급 소아·청소년의 상기도 공간에 영향을 미치는 요인 : CBCT 연구)

  • Kim, Byounghwa;Lee, Jewoo;Ra, Jiyoung
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.48 no.1
    • /
    • pp.1-11
    • /
    • 2021
  • The purpose of this study is to investigate factors influencing the upper airway dimensions in skeletal Class II children and adolescents. In total, 67 patients were selected. Airway volume and minimal cross-sectional area were three-dimensionally assessed. Craniofacial morphology and skeletal maturity were assessed on generated two-dimensional cephalograms. The measurements were analyzed using Mann-Whitney test, one-way ANOVA, Pearson's correlation, and multiple regression analysis. Upper airway dimensions were significantly smaller in pre-peak stage group, and positively associated with age. Anterior facial height and age were the most relevant factors for airway volume. Mandibular width and age were the most relevant factors for minimal cross-sectional area. Upper airway dimensions were significantly associated with age, skeletal maturity and craniofacial morphology in all three planes.