• Journal of Korean Neurosurgical Society
• /
• v.37 no.5
• /
• pp.370-374
• /
• 2005

Objective: We investigated the morphologic changes within 24 hours after a single ${\gamma}$-irradiation in the rat brain. Methods: Forty Sprague-Dawley rats were used. After a burr hole trephination on right parietal area, cerebral hemisphere was irradiated with 2Gy and 5Gy using iridium-192($^{192}Ir$), respectively. The effect was assessed at 4, 8, 12 and 24 hours after irradiation. The histological changes were scored following the detection of edema or disarray severity. TUNEL-positive cells exhibiting apoptotic morphology were counted in irradiated region. Results: Cortical edema and disarray were initially showed at 4 or 8 hour and almost all defined at 24 hour after irradiation. And the injury was wedge shape. TUNEL-positive cells were minimal at 8 hour after irradiation as the number of positive cells were $2.6{\pm}5.27$(n=5) after 2Gy, and $0.8{\pm}0.84$(n=5) after 5Gy. But, the number of apoptotic cells were increased markedly to $60{\pm}6.24$ at 12 hour after 2Gy and to $104{\pm}19.7$ at 24 hour after 5Gy. Conclusion: There were prominent morphologic changes immediately after ${\gamma}$-irradiation. And, apoptosis was increased according to the time period. These findings implicate that brain irradiation induces rapid apoptotic change, which may play an important role in the pathogenesis of radiation-induced pathologic conditions.

• Korean Journal of Veterinary Research
• /
• v.27 no.2
• /
• pp.167-183
• /
• 1987

The anatomical structure of the Skeleton of thoracic limb of thirty-one adult Korean native goats(body weight: 14~17kg) was observed after skeletal preparation, and the osteometry was performed in each bone. The results were as follows; 1. The thoracic limb of the Korean native goat was composed of scapula, humerus, radius, ulna, carpal bones, metacarpal bones, phalanges and sesamoid bones. 2. The scapula was flat and triangular in shape. There were no distinct tuber of spine and acromion in the spine. The subscapular fossa was deep and triangular in shape and the vertebral border was sigmoid form. The coracoid bone was formed as the coracoid process at the medial aspect of the supraglenoid tubercle but the clavicle wa.s not observed. The left and right scapular indexes were 57.92 and 58.31 and the glenoid cavity indexes were 89.23 and 86.82, respectively. 3. The greater tubercle of the humerus was devided into cranial and caudal parts. The third tubercle was observed and the face for the infraspinatus muscle was rectangular form. The left and right humerus indexes were 32.44 and 32.63, the head indexes were 94.13, 96.62 and the trochlear-epidondyle indexes were 67.32 and 65.81, respectively. 4. The radius and ulna were fused entirely except at the broad proximal and narrow distal interosseous spaces. The ulna was longer than the radius, and its reduced body and distal end were fused at the caudomedial surface of the radius. 5. The carpal bones were six in number. There were radial, intermediate, ulnar, accessory, second-third and fourth carpal hones in carpal bones. 6. The metacarpal bone was composed of a large metacarpal bone resulted from the fusion of the third and fourth metacarpal bones, and there was a metacarpal tubercle at the dorsolateral part of the proximal end. There were no vestiges of the second and fifth metacarpal bones. 7. The digits were composed of third and fourth digits and each digit was composed of the proximal, middle and distal phalanges. 8. The sesamoid bones were six in number. There were two at the fetlock joint and one at the coffine joint palmarly in each digit. 9. The ratios of the lengths among the scapula, humerus, antebrachium and metacarpal bone were 1.42 : 1.47 : 1.77 : 1.00 in the left and 1.42 : 1.45 : 1.77 : 1.00 in the right, respectively.

• Journal of Veterinary Clinics
• /
• v.30 no.5
• /
• pp.384-386
• /
• 2013

A two-year-old, female English bulldog was referred for breeding by artificial insemination with frozen semen of male English bulldog, a litter of female bulldog's grandfather. Intrauterine artificial insemination was done two days after the ovulation day. Sperm was evaluated after thawing by computer assisted sperm analyzer, and its motility was 89.8% with normal shape. Pregnancy bearing eight fetuses was diagnosed by ultrasonography and radiography. Cesarean section was performed sixty days after the artificial insemination. Eight pups were delivered with safe, but the entire pup had abnormalities including severe bow-legged malformations, cleft lip, cleft palate, and enlarged cranial part.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.543-549
• /
• 2004

Chitosan has been widely researched as bone substitution materials and membranes in orthopedic/periodontal applications. Chitosan nanofiber membrane was fabricated by chitosan nanofiber using electrospinning technique. The structure of the membrane is nonwoven, three-dimensional, porous, and nanoscale fiber-based matrix. The aim of this study was to evaluate the biocompatibility of chitosan nanofiber membrane and to evaluate its capacity of bone regeneration in rabbit calvarial defect. Ten mm diameter round cranial defects were made and covered by 2 kinds of membranes (Gore-Tex membrane, chitosan nanofiber membrane) in rabbits. Animals were sacrificed at 4 weeks after surgery. Decalcified specimens were prepared and observed by microscope. Chitosan nanofiber membrane maintained its shape and space at 4 weeks. No inflammatory cells were seen on the surface of the membrane. In calvarial defects, new bone bridges were formed at all defect areas and fused to original old bone. No distortion and resorption was observed in the grafted chitosan nanofiber membrane. However bone bridge formation and new bone formation at the center of the defect could not be seen in Gore-Tex membranes. It is concluded that the novel membrane made of chitosan nanofiber by electrospinning technique may be used as a possible tool for guided bone regeneration.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.203-212
• /
• 2013

The tooth morphology and qualitative mineral contents on enamel surface using energy dispersive X-ray spectroscopy, (EDX) were examined in the white-toothed shrew (genus Crocidura ) Crocidura lasiura and C. suaveolens and the red-toothed shrew (genus Sorex) Sorex caecutiens. In the case of C. lasiura and C. suaveolens, dental formula was found I 3/1 C1/1 P1/1 M3/3=28. The upper 1st and 2nd molars had an unequal W-shape formed by 5 cusps on the crown. The 3rd molar was found one-third the size of those of 1st and 2nd molars. The upper 1st incisor had two different sized hook-shapes and the lower 1st incisor was even. In the case of S. caecutiens, dental formula was found to be I3/1 C1/1 P3/1 M3/3=32. The upper 1st and 2nd molars had an equal W-shape on crown. The upper 3rd molar was half the size of those of the other molars. The upper 1st incisor possessed two similar sized hook-shapes and the lower 1st incisor had an uneven and serrated form. A comparison with the dental and cranial measurements revealed C. lasiura to be the largest of the three species (p<0.001) and C. suaveolens and S. caecutiens were similar in size (p>0.05). A qualitative analysis of mineral contents on enamel surface of the lower 1st incisor and lower 1st molar using EDX revealed C, O, P, Ca and Cu in all specimens and Pb was detected in several enamel specimens. No significant differences in the mineral contents (% weight) were observed among the three species (p>0.05). Fe was only detected on enamel surface of S. caecutiens with red pigmented teeth. Therefore, Fe is responsible for the red tip of the teeth. These results suggest that tooth morphological characteristics including the color of the tooth tip might be used as the key classifying species belonging to Crocidura and Sorex.

• Korean Journal of Environmental Biology
• /
• v.35 no.3
• /
• pp.389-397
• /
• 2017

The purpose of this study was to investigate the characteristics of species by comparing the external shape traits and skull size of Tscherskia triton in Jeju Island from May 2014 to November 2016. Body weight, head-body length, ear length, and hind-foot length were not statistically significant (p>0.05), but tail length was statistically significant in females compared to males (p=0.003). To examine the secondary sexual dimorphism characteristics of the collected T. triton, B_HR, T_HR, E_HR, and H_HR were calculated based on the head-body length, and only T_HR was statistically significant (p=0.003). Because of comparing male and female averages, among the 21 traits, the greatest length of skull (GLS; p=0.020) and occipitonasal length (ONL; p=0.014) were statistically significant and length of incisive foramen (LIF) was statistically significant, when the significance level was 90%. However, the other 18 traits did not show statistically significant differences between males and females (p>0.05). Other than GLS, ONL, interorbital breadth (IB), and breadth of occipital foramen (BOF), there was female-biased SSD. The results of this study are the analysis of external morphology and skull characteristics of T. triton in Jeju Island and will be used as basic data to understand the morphological characteristics of T. triton. In addition, the data can be used as a basic information to compare characteristics of T. triton, which is known as a single species, inhabited in China and Russia. The data will play an important role in biogeography and ecology research of T. triton, based on geographical conditions, climate effects, and habitat environment.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.87-97
• /
• 2011

Objective: Facial asymmetry is usually evaluated from the difference in length and angulation of the maxilla and mandible. However, asymmetric position or shape of the condyle can also affect the expression of asymmetry. The purpose of this study was to evaluate the correlation between condylar asymmetry and chin point deviation in facial asymmetry. Methods: Cone-beam CT images of fifty adult skeletal Class III patients were studied. Thirty patients who had more than 4 mm menton deviation were categorized in the asymmetric group. Twenty patients with less than 4 mm menton deviation were assigned to the symmetric group. Anteroposterior and transverse condyle positions were evaluated from the cranial base. The greatest mediolateral diameter (GMD) of the condyle in the axial plane and angulation to the coronal plane were measured. The height and volume of the condyles were evaluated. Results: The symmetric group had no statistical difference between both condyles in position, angulation, GMD, height and volume. In the asymmetric group, the non-deviated side condyle was larger in GMD, height and volume than the deviated side. There was no statistical difference in condyle position and angulation. The GMD, height difference and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. From the linear regression analysis, condylar volume ratio was a significant factor affecting chin deviation. Conclusions: These findings suggests that the non-deviated side condyle is larger than the deviated side. In addition, condylar asymmetry can affect the expression of facial asymmetry.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.353-370
• /
• 1998

This study was conducted to investigate the changes in the structural parts of the craniofacial skeleton subsequent to chincap therapy in the juvenile skeletal Class III patients. The subject consisted of 29 Korean children(14 males, 15 females) who had skeletal Class III malocclusion and were undergone chincap therapy from the beginning of the treatment (and an auxilliary upper removable appliance, if necessary). The control group was composed of 21 children(10 males, 11 females) with skeletal Class III malocclusion who had no orthodontic treatment. Cephalometric data at the mean age of 7 and 2 years later were analyized by finite element method, and compared between groups by independent group t-test(p<0.05). The results of the present study were as follows; 1. There were no significant changes in the cranial base, posterior face, upper anterior face, ramus, chin and soft tissues by the chincap therapy. 2. The mandibular body showed significant differences in the minimum extention ratio and the overall shape ratio. This means that the vertical direction of growth was retarded by the chincap therapy. 3. The major direction of the growth in the maxillary basal bone was significantly more horizontal in the experimental group, which suggests that the vertical growth of maxilla was inhibited. 4. There was statistical difference in the major direction of the growth of the anterior face between groups. This may be due to the significant difference in the major direction of growth of the lower anterior face, supposed to be resulted from the mandibular rotation and/or displacement by the chincap therapy. The change in the oral functional space seemed to be caused by the same reason. 5. From the standpoint of these results, the retardation of growth, the changes of the growth direction and the morphological changes could be accepted partly, but the major effect of the chincap seems to be the rotation and the displacement of the mandible.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.225-236
• /
• 2001

It is widely accepted that the shape and structure of bone are closely related to the activity of attached muscle. Numerous clinical and animal experimental studies indicated the significant effects of masticatory muscle function on maxillofacial morphology. Recently, the development of ultrasonography has spread throughout different fields of medicine. In the clinical examinations, ultrasonography is a convenient, inexpensive technique to apply with accurate and reliable results. The aim of this study is to assess the thickness of the masseter muscle and its correlation to maxillofacial skeleton by examining 35 male and 15 female dental students at Kangnung National University. The masseter muscle thickness of the subjects were measured by ultrasonographic scanning with a 7.5MHz linear probe, and their maxillofacial morphology were investigated by lateral cephalometric radiographs. The relationship between the masseter muscle thickness and maxillofacial morphology of normal adult was statistically analyzed, and the following results were obtained. 1. The average thickness of male masseter muscle was 13.8${\pm}$1.71mm in the relaxed state and 14.8${\pm}$1.77mm at maximal clenching state, while that of female was 11.6${\pm}$1.58mm and 12.4${\pm}$1.47mm, respectively. Ethnic difference in thickness of the masseter muscle and maxillofacial skeleton was found when the results of many researchers were compared with those of this study. 2. The thickness of the masseter muscle in both sexes increased significantly at maximal clenching state than in relaxed state(P<0.05). 3. The masseter muscle thickness of male was greater than that of female both in the relaxed state and maximal clenching states(P<0.05). 4. In males, the thickness of the masseter muscle was negatively correlated with the mandibular plane angle and positively correlated with the mandibular ramus height and anterior cranial base length(P<0.05). It may suggest that the male with thicker masseter muscle has smaller facial divergence. 5. No significant correlation was found between the masseter muscle thickness and maxillofacial morphology in females(P<0.05). Therefore, these data suggest that ultrasonography can add valuable information to the conventional examinations of masseter muscle function.