• Journal of the Korean institute of surface engineering
• /
• v.27 no.3
• /
• pp.158-165
• /
• 1994

Cu-Cr alloy thin film requires good quality of etching be used for TAB technology. The etched cross sec-tion was clean enough when the etching was performed in 0.1M $FeCl_3$ solution at $50^{\circ}C$. The etching rate was increased with the amount of $KMnO_4$. For enhanced profile of cross section and rate, the spray etchning was found to be superior compared to the immersion etching. A series of experiments were performed to improve the uniformity of the current distribution in electrodeposition onto the substrate with lithographic patterns. Copper was electrodeposited from quiescent-solution, paddle-agitated-solution, and air-bubbled-solution to in-vestigate the effect of the fluid flow. The thickness profile of the specimen measured by profilmetry has the non uniformity at feature scale in quiescent-solution, because of the longitudinal vortex roll caused by the natural convection. However, uniform thickness profile was achieved in paddle-agitated or air bubbled solu-tion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.399-403
• /
• 2012

The management of heavy metals in soil is important for environmental-friendly agriculture and keeping an ecosystem healthy. In this study, we examined the concentrations of heavy metals (Cd, Cr, Cu, Ni, Pb, Zn, and As) in 260 paddy soils sampled from Gyeongnam Province. The concentrations of the heavy metals were 0.143 mg $kg^{-1}$ (ranged 0.003-0.537) for Cd, 0.322 (0.002-0.986) mg $kg^{-1}$ for Cr, 25.41 (6.03-76.19) mg $kg^{-1}$ for Cu, 16.36 (2.63-32.94) mg $kg^{-1}$ for Ni, 18.67 (4.16-87.02) mg $kg^{-1}$ for Pb, 71.76 (22.99-153.58) mg $kg^{-1}$ for Zn, and 3.516 (0.002-19.481) mg $kg^{-1}$ for As, respectively. In addition, the concentration of Cd was highest in mountain foot-slope, Ni and As were highest in diluvial terrace, and Zn was highest in marine plains. Higher concentrations of Cd, Cu, and Zn were found in silty clay loam soils compared to silt loam, sandy loam, and loam soils.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.89-93
• /
• 2008

Ferrimagnetic Copper-Iron-Chromium Oxide $CuFe_{0.9}Cr_{1.1}O_4$ has been investigated over a temperature range from liquid nitrogen temperature upto $N{\acute{e}}el$ temperature using the Mossbauer technique. Its $N{\acute{e}}el$ temperature is found to be 355 K. Above the $N{\acute{e}}el$ temperature the quadrupole splitting is found to be 0.50 mm/s. On the other hand, all the electric quadrupole shift values are zero below the $N{\acute{e}}el$ temperature within experimental error. These seemingly contradictory phenomena have been explained by the model that the magnetic hyperfine field is randomly oriented with respect to the principal axes of the electric-field-gradient tensor.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.295-300
• /
• 1995

In order to find out the natural content of heavy metals(Cd, Cu, Pb, Zn, Cr, Ni)in paddy soil of Korea, a total of 1,196 soil samples of 15cm top layers all over the country 1995 were collected and analyzed. The average heavy metal contents in soils were 0.133mg/kg of Cd, 4.52mg/kg of Cu, 4.62mg/kg of Pb, 3.90mg/kg of Zn, 0.362mg/kg of Cr and 1.38mg/kg of Ni. These results are similar to the results of survey conducted in 1981.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.394-398
• /
• 1997

Changes of nutrient material and heavy metals of irrigation water and natural supplies by irrigation water into 1.0ha of paddy field during the rice cultivation was investigated pH of irrigation water ranged 6.458.34 and electrical conductivity showed $110{\mu}S/cm$ in the first irrigation period and commonly showed $90{\mu}S/cm$. The content of T-N, NH4-N and $NO_3-N$were 3.09~12.36, 0.17~1.34 and 2.70~10.72mg/L respectively. The content of T-P was 0.09~0.22mg/L and ortho-P was not detected. The content of $Ca^{++},\;Mg^{++},\;Na^+\;and\;K^+$ showed 0.89~5.12, 1.12~2.76, 1.74~4.52 and 1.34~4.18mg/L regardless of irrigation season respectively. Only Cu and Zn of heavy metals were detected 0.001~0.009 and 0.007~0.091mg/L, but Pb, Cd, Cr and Ni were not detected When supplied $4,250m^3$ of an irrigation water into 1.0㏊ of paddy field, natural supplies of nutrient materials were 29.67㎏ of T-N, 1.80㎏ of $NH_4-N$, 24.57kg of NO3-N and 0.51kg of T-P. Also $Ca^{++},\;Mg^{++},\;Na^+,\;K^+,\;Cl^-\;and\;SO_4\;^{2-}$ were supplied 9.42, 7.09, 13.34, 9.08, 40.27 and 41.38kg respectively. Only Cu and Zn of heavy metals were supplied 0.017kg of Cu and 0.133kg of Zn, Pb, Cd, Cr and Ni were not supplied

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.294-297
• /
• 2000

Heavy metals are extracted from Chonju stream sediment, roadside soils and sediments along Honam expressway, soils and tailings from mining area using partial ectraction in Standard Method, partial ectraction method with maintaining 0.1N of extraction solution and acid digestion. In samples having buffer capacity against acid, 0.1N of extraction solution can not be maintained and pH of extraction solution increases up to 8.0 when partial extraction in Standard Method is used. The averages and ranges of (heavy metals extracted using partial extraction in standard method, HPE)/(heavy metals extracted using partial extraction method with maintaining 0.1N of extraction solution, HPEM) values are 0.506 and 0.145~1.126 in Cd, 0.534~ and 0.078~0.928 in Zn, 0.461 and 0.041~1.715 in Mn, 0.359 and 0.011~0.874 in Cu, 0.195 and 0.018~1.785 in Cr, 0.710 and 0.003~3.075 in Pb, and 0.088 and 1.73$\times$10$^{-5}$ ~0.303 in Fe. These data indicate that the difference between HPE and HPEM is big in the order of Fe, Cr, Cu, Mn, Cd, Zn and Pb. It is quite possible that the partial extraction method in Standard Method of soil in Korea is not adequate for an assessment of contamination in area where buffer capacity of soil will be decreased or lost after a long term exposure of soils to environmental damage.

• Journal of Food Hygiene and Safety
• /
• v.17 no.4
• /
• pp.178-182
• /
• 2002

This study was conducted to estimate the status of heavy metal contamination in agricultural products (n = 280), soils (n = 280), and irrigation waters (n = 48) in abandoned mines & normal farm lands (n = 8). The samples were digested with acids, then analyzed fur the contents of lead (Pb), cadmium (Cd), copper (Cu), mercury (Hg), arsenic (As) and chrome (Cr) by an inductively coupled plasma spectrometer (ICP) and graphite- atomic absorption spectrophotometer (AAS). The contents of Hg were determined using a mercury analyzer. Abandoned mines had soils with higher contents of heavy metals except Cr and irrigation waters with higher heavy metals except Hg, compared to those of normal farmlands. The contents of heavy metals in agriculture products varied depending types of products. Agricultural products in abandoned mines generally showed with higher contents of heavy metals except Cu, compared to those of normal farmlands. There was no significant relationship in heavy metal contents between agricultural products and soils (p > 0.05). It is suggested that heavy metals of agricultural products and soils in abandoned mines should be continuously monitored.

• Carbon letters
• /
• v.2 no.1
• /
• pp.15-21
• /
• 2001

In this work, activated carbon fibers (ACFs) were plated with copper metal using electroless plating method and the effects of surface properties and pore structures on chromium adsorption properties were investigated. Surface properties of ACFs have been characterized using pH and acid/base values. BET data with $N_2$ adsorption were used to obtain the structural parameters of ACFs. The electroless copper plating did significantly lead to a decrease in the surface acidity or to an increase in the surface basicity of ACFs. However, all of the samples possessed a well-developed micropore. The adsorption capacity of Cr(III) for the electroless Cu-plated ACFs was higher than that of the as-received, whereas the adsorption capacity of Cr(VI) for the former was lower than that of the latter. The adsorption rate constants ($K_1$, $K_2$, and $K_3$) were also evaluated from chromium adsorption isotherms. It was found that $K_1$ constant for Cr(III) adsorption depended largely on surface basicity. The increase of Cr(III) adsorption and the decrease of Cr(VI) adsorption were attributed to the formation of metal oxides on ACFs, resulting in increasing the surface basicity.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.269-278
• /
• 2010

We investigated characteristics of the coloring material of Dancheong pigments and hope that this study contributes the revival of traditional Dancheong pigments color. For this purpose, we collected Dancheong fragment samples that fell off naturally from old wooden buildings in Gwangju and Jeonnam and analyzed the natural coloring material by XRD and EDS-SEM analysis method. In white pigments of Dancheong fragments, it is confirmed that gypsum$(CaSO_{4}{\cdot}2H_{2}O)$, quartz$(SiO_{2})$, white lead$(PbCO_{3})$ and calcite$(CaCO_{3})$ which have been used for white pigments since ancient times and $TiO_{2}$ which is common used in modern times. In red pigments of Dancheong fragments, it is confirmed that hematite$(Fe_{2}O_{3})$ and red lead$(Pb_{3}O_{4})$, which have been used for red pigments since ancient times and C.I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$ but there is no cinnabar(HgS) which has been used since B.C. 3000 in China. In yellow pigments of Dancheong fragments, it is confirmed that crocoite$(PbCrO_{4})$ and massicot(PbO). In blue pigments of Dancheong fragments, it is confirmed that sodalite$(Na_{4}BeAlSi_{4}O_{12}Cl)$ and nosean $(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$ as coloring material of blue pigment and C.I. pigments blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ which is used in modern times. In green pigments of Dancheong fragments, it is confirmed that calumetite$(Cu(OHCI)_{2}{\cdot}2H_{2}O)$, escolaite(Cr2O3), dichromium trioxide$(Cr_{2}O_{3})$, emerald green$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$, and C.I. pigments green$(C_{32}H_{16}-XCl_{x}Cu_{8})$ which is used in modern time. In black pigments of Dancheong fragments, Chiness ink(carbon black) is confirmed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.78-91
• /
• 2018

In order to understand the distributions of organic matter and heavy metal concentrations in the surface sediment of Jaran Bay, we measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in surface sediments collected at 15 stations in this bay in November 2014. The sediment consisted of finer sediment such as mud and clay, with 8.6-9.8Ø($9.3{\pm}0.3$Ø) of mean grain size. The concentrations of TOC and TN in the sediment ranged from 1.51-2.39 % ($1.74{\pm}0.22%$) and 0.20-0.33 % ($0.23{\pm}0.03%$), respectively, and did not show spatial difference. The carbon to nitrogen ratio (C/N ratio) ranged from 5-10, indicating that organic matter in the sediment originated from oceanic sources such as animal by-products from fish and shellfish farms. The concentrations of Cr, Fe, and Mn were much higher in the mouth of the bay than in the inner bay, and the concentrations of As, Cd, Cu, Hg, Pb, and Zn showed an opposite distribution pattern. Based on the results of the sediment quality guidelines (SQGs), enrichment factor (EF), geoaccumulation index ($I_{geo}$), pollutant load index (PLI), and ecological risk index (ERI), the surface sediment in Jaran Bay is not polluted or only slightly polluted with Cd, Cr, Cu, Hg, Pb, and Zn, whereas it is moderately to strongly polluted with As. In particular, some regions in the bay were identified as having a considerable risk status, indicating that metal concentration in the sediment could impact benthic organisms. Thus, the systematic management for marine and land sources of organic matter and heavy metals around Jaran Bay is necessary in order to ensure seafood safety and maintain sustainable production on shellfish farms.