• Korean Journal of Poultry Science
• /
• v.42 no.2
• /
• pp.133-137
• /
• 2015

We investigated the effects of supplementing low energy diets with lysolecithin and sodium stearoyl-2-lactylate on growth performance and nutrient digestibility in broilers. A total of 768 1-d-old Ross 308, mixed gender broiler chicks with an average initial body weight of 44.3 g, were used in a 35-d feeding trial. Broiler chicks were sorted into pens with 16 birds per pen and every treatment consisted of 12 pens (192 chickens per treatment). Treatments were: 1) PC: basal diet, 2) NC: PC-100 kcal, 3) T1: NC+ 0.08% lysolecithin, and, 4) T2: NC + 0.04% sodium stearoyl-2-lactylate. Body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR) were measured on a weekly basis. Chromium oxide was added to the diets at 0.2% on the last week of the experiment, as a marker for digestibility. Dietary treatments had no effect on growth performance for days 1 to 21. Low energy diet supplemented with lysolecithin and sodium stearoyl-2-lactylate in phase 2 (d 21 to 35) improved body weight gain (P<0.05). Addition of lysolecithin and sodium stearoyl-2-lactylate to the diets improved the digestibility of energy and nitrogen (P<0.05), but digestibility of dry matter was not affected. Overall, addition of an emulsifier to the diet of broiler chickens in the late growth phase enhanced growth performance and digestibility of energy and nitrogen.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.23-30
• /
• 1985

Keloids are abnormally healed skin wounds that develop in the subpapillary layer of the dermis. They are a lesion with wide, raised and deep scars. They exceed the original dimensions of the wound and grow mounds upon mounds of collagen in a pseudotumor fashion. Their treatment may take several forms such as surgery, intralesional injection of steroid, compression, superficial irradiation, and combination therapy. However, absolute method is nothing until now. Recently, the cryosurgery shows relatively good effect in treatment, so we tried the clinical experience with cryosurgery in the treatment of keloids. Material and methods: During the past 2 years, we treated 20 individuals of the keloids with severe itching and pain. The age ranged from 5 to 45 years old. Only 6 cases were biopsied before and after cryotherapy. The cryosurgery set we used was Toitu model CR 201 $N_2O$ gas (tip temperature is $-80^{\circ}C$) and was applied directly on the lesion about 4 to 5 minutes with slight compression. After cryosurgery in keloids, the following results were obtained: 1. It is both quick and easy method. 2. It causes little or no pain and no loss of blood. 3. Integumentary normalization is rapid. The new scar tissue is smaller, and more elastic and soft. 4. The pain, itching and paresthesia commonly associated with keloid is usually disappeared. 5. Other treatment can be used after cryosurgery. 6. Histologic picture after cryosurgery is similar with the result of steroid injection. 7. The mechanism of the cryosurgery in keloids is the result of the direct tissue destroying action and cryoimmunologic reaction.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.1
• /
• pp.25-32
• /
• 1998

To characterize the growth environment, inorganic composition and morphological chracteristics of leaves of Korean tea plant, soil and tea leaf samples were collected from 15 locations and analyzed. The chemical characteristics of soils were in range of pH 4.09~6.15, OM 23.9~72.6g/kg, available phosphate less than 300mg/kg, K $0.8{\sim}2.5cmol^+/kg$, Na $tr{\sim}0.17cmol^+/kg$, Ca $1.0{\sim}6.2cmol^+/kg$, and Mg $0.3{\sim}2.1cmol^+/kg$. The contents of Ni. Cr, Zn. Cu, Pb, and Cd were at the level less than natural content in upland soil. Most of the sample soils were sandy loamy and loamy texture. The native tea plants were mainly grown in bamboo thicket or in forest. The leaf sizes of tea plants were $6.85{\pm}1.75{\times}2.6{\pm}0.5cm$, lateral vein number $14.2{\pm}2.7$, and crenated number $58.5{\pm}11.2$, and the leaf color was thin to dark green. The contents of $NH_4{^+}$, $Na^+$, $K^+$, $Mg^{2+}$ and $Ca^{2+}$ in tea leaves were in range of 30.5~47.7, 45.5~164.5, 16,998~25,431, 1.590~2,392 and 1,085~1,958mg/kg, respectively. The contents of $F^-$, $Cl^-$, $NO_3{^-}$, $PO_4{^{3-}}$ and $SO_4{^{2-}}$ were in range of 21.2~63.2, 126.4~257.9, 108.5~185.9, 1,270~1.819, and $954{\sim}1,670mg/kg$, respectively. The leaf size of native tea plant grown widlly in Shunchun Changchun-ri, Hwasun Ssangbongsa, Kuryoi Chonunsa, Bosong Daewonsa and Namhae Boriam was as large as those of Yabukita. Japan cultiver, grown at Kangjin Jangwon tea field.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1148-1155
• /
• 2020

Objective: The objective was to determine standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in cereal grains and various co-products fed to growing pigs. Methods: Ten feed ingredients tested were barley (9.3% CP), lupin kernels (31.1% CP), and wheat (11.3% CP) as cereal grains, and 2 sources of corn gluten feed produced in China (21.6% CP) and Korea (24.6% CP), corn gluten meal (65.3% CP), lupin hulls (11.6% CP), rice bran (14.5% CP), soybean meal (44.8% CP), and wheat bran (15.4% CP) as co-products. Ten experimental diets were formulated to contain each ingredient as a sole source of N and an N-free diet was used to correct basal endogenous losses of CP and AA. All diets also contained 0.5% Cr₂O₃ as an indigestible index. A replicated 11×6 incomplete Latin square design with 11 dietary treatments, 6 periods, and 22 animals was employed. Twenty-two barrows with an initial body weight of 64.6±4.9 kg were equipped with a T-cannula in the distal ileum. An experimental period consisted of a 4-d adaptation period and a 2-d collection period. Results: The SID of CP in the barley, lupin kernels, wheat, 2 sources of corn gluten feed, corn gluten meal, lupin hulls, rice bran, soybean meal, and wheat bran were 84.7%, 90.5%, 90.4%, 77.4%, 74.6%, 89.5%, 90.4%, 74.4%, 86.9%, and 63.4% (standard error of the mean [SEM] = 5.3, p = 0.006), respectively. The respective SID values of Lys were 75.5%, 88.4%, 83.9%, 74.7%, 62.4%, 80.3%, 83.9%, 78.5%, 88.0%, and 71.2% (SEM = 3.3, p<0.001), and the SID values of Met were 83.6%, 88.7%, 89.4%, 85.7%, 78.3%, 88.9%, 89.4%, 85.3%, 91.1%, and 77.0% (SEM = 2.4, p<0.001), respectively. Conclusion: The ileal digestibility of protein and amino acids varies among the feed ingredients fed to pigs.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.122-128
• /
• 2010

The corrosion of the flexible tube in the automobile exhaust system is caused by the ambient water and chloride ions. Since welding is one of the key processes for the flexible tube manufacturing, it is required to select a proper welding method to prevent the flexible tube corrosion and to increase its lifetime. There are many studies about the efficiency of the welding method, but no systematic study is performed for the effect of welding method on the corrosion property of the austenitic stainless weldment. The aim of the present study is to provide information on the effect of two different welding methods of TIGW (tungsten inert gas welding) and PAW (plasma arc welding) on the corrosion property of austenitic stainless steel weldment. Materials used in this study were two types of the commercial austenitic stainless steel, STS321 and XM15J1, which were used for flexible tube material for the automotive exhaust system. Microstructure was observed by using optical microscopy (OM) and scanning electron microscopy (SEM). To evaluate the corrosion behavior, potentiodynamic and potentiostatic tests were performed. The chemical state of the passive film was analyzed in terms of XPS depth profile. Metallurgical analysis show that the ferrite content in fusion zone of both STS321 and XM15J1 is higher when welded by PAW than by TIGW. The potentiodynamic and potentiostatic test results show that both STS321 and XM15J1 have higher transpassive potential and lower passive current density when welded by PAW than by TIGW. XPS analysis indicates that the stable $Cr_2O_3$ layer at the outermost layer of the passive film is formed when welded by PAW. The result recommends that PAW is more desirable than TIGW to secure corrosion resistance of the flex tube which is usually made of austenitic stainless steel.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.240-246
• /
• 2016

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.175-178
• /
• 2004

The stochiometric mixture of evaporating materials for the $ZnIn_2S_4$ single crystal thin film was prepared from horizontal furnace. To obtain the $ZnIn_2S_4$ single crystal thin film, $ZnIn_2S_4$ mixed crystal was deposited on throughly etched semi-insulating GaAs(100) in the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were $610^{\circ}C$ and $450^{\circ}C$, respectively and the growth rate of the $ZnIn_2S_4$ sing1e crystal thin film was about $0.5\;{\mu}m/hr$. The crystalline structure of $ZnIn_2S_4$ single crystal thin film was investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of $ZnIn_2S_4$ single crystal thin film measured from Hall effect by van der Pauw method are $8.51{\times}10^{17}\;cm^{-3}$, $291\;cm^2/V{\cdot}s$ at $293_{\circ}\;K$, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $ZnIn_2S_4$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}S_O$ and the crystal field splitting ${\Delta}Cr$ were 0.0148 eV and 0.1678 eV at $10_{\circ}\; K$, respectively. From the photoluminescence measurement of $ZnIn_2S_4$ single crystal thin film, we observed free excition $(E_X)$ typically observed only in high quality crystal and neutral donor bound exciton $(D^{o},X)$ having very strong peak intensity The full width at half maximum and binding energy of neutral donor bound excition were 9 meV and 26 meV, respectively, The activation energy of impurity measured by Haynes rule was 130 meV.

• Journal of Veterinary Science
• /
• v.22 no.6
• /
• pp.78.1-78.10
• /
• 2021

Background: Recurrent subclinical mastitis (RScM) due to resistant bacteria has low clinical and bacteriological cure rates, often requiring the culling of cows. The sequential intramammary administration of enrofloxacin hydrochloride-dihydrate (enro-C) followed by ceftiofur HCl may be useful for treating these cases. Objectives: This study assessed the bacteriological and clinical cure-efficacies of the sequentially intramammary administration of enro-C, followed by ceftiofur HCl to treat RScM in Holstein/Friesian cows. Methods: This trial was conducted in a herd with a high prevalence of RScM, and 20 Holstein/Friesian cows were included: 45% suffering subclinical mastitis and 38.9% of the mammary quarters affected. Twenty-nine bacterial isolates in vitro resistant to enro-C were obtained (coagulase-negative Staphylococcus spp, 55.2%; Staphylococcus aureus, 27.6%; Escherichia coli, 6.9%; Streptococcus uberis, 6.9%; Corynebacterium bovis, 3.4%). Polymerase chain reaction-isolated the following genes linked to enro-C resistance: chromosomal (gyrA) and plasmid (aac(6')-lb-cr). The treatments were as follows: twice-daily intramammary infusions of enro-C (300 mg/10 mL) for 5 days. Cows clinically considered treatment failures were also treated with intramammary ceftiofur (125 mg/10 mL, twice daily for 5 days. The clinical and bacteriological cure rates were carried out when completing each treatment phase and at 14 and 21 days, aided by a California mastitis test, somatic cell count, and failure to identify the initially causative bacteria. Results: Enro-C achieved 65% clinical and bacteriological cure rates, and 100% cure rates were obtained after the rescue treatment with ceftiofur HCl. Conclusions: Outstanding clinical and bacteriological cure rates in cows affected by RScM were achieved with the consecutive intramammary infusions of enro-C, followed by ceftiofur HCl.

• Journal of Life Science
• /
• v.24 no.4
• /
• pp.403-410
• /
• 2014

This study was conducted in organic certification soil for the comparison of heavy metals, nutrients, and irrigated water standards to certify a farm. It was carried out in 811 paddy fields of organic rice (Oryza sativa L.) cultivated at Goseong-Gun. The amounts of 8 heavy metals, Cd, Cu, As, Hg, Pb, $Cr^{6+}$, Zn, and Ni were found to be 0.05, 14.5, 1.08, 0.92, 10.7, 1.34, 35.9, and 22.2 mg $kg^{-1}$ in regular sequence in the organic paddy soil, and they were 0.32, 13.6, 1.01, 0.03, 10.4, 0.91, 42.4 and 22.5 mg $kg^{-1}$ in the non-pesticide paddy soil. In comparing organic and non-pesticide paddy soil with respect to the chemical characteristics of the soil, the average pH and the amount of organic matter, available phosphate and available silicate were 5.88 and 27.6 g $kg^{-1}$, 134.5 mg $kg^{-1}$, and 165.3 mg $kg^{-1}$, while they were 5.78 and 32.1 g $kg^{-1}$, 107.7 mg $kg^{-1}$, and 175.2 mg $kg^{-1}$, respectively. The amount of exchangeable cation $K^+$, $Ca^{2+}$, and $Mn^{2+}$ were 0.25, 5.20, and 1.04 cmol+ $kg^{-1}$ in organic paddy soil, while they were 0.38, 5.13, and 1.19 cmol+ $kg^{-1}$ in non-pesticide paddy soil. The pH, DO, BOD, COD and SS conditions of the irrigated water used in the organic paddy soil were found to be 7.23, 8.40, 2.80, 1.86, and 2.58 mg $l^{-1}$ and the condition of irrigated water used in the non-pesticide paddy soil were found to be 7.65, 9.16, 2.25, 4.11, and 4.00 mg $l^{-1}$, respectively. Based on these findings, we suggest that environmentally-friendly certificates in Korea have to unify organic and non-pesticide agro-products in an organic standard in food policy and control because there is no difference between soil and irrigated water standards in the two certifications.