• 공업화학
• /
• 제34권6호
• /
• pp.596-602
• /
• 2023

크롬 기반 금속유기골격체(MIL-101(Cr))를 제조하고 이들을 활용한 유사화학작용제 diisopropyl methyl phosphonate(DIMP) 흡착 실험을 통해 방독면 정화통이나 보호의 충진물질로서 활용 가능성을 평가하였다. MIL-101(Cr)은 조절인자로 아세트산(MIL-101(Cr)-A)과 수산화나트륨(MIL-101(Cr)-N)을 활용하여 각각 제작하였는데, 아세트산을 조절인자로 사용하였을 때 보다 넓은 비표면적과 높은 DIMP 흡착량을 보였다. MIL-101(Cr)-A는 상대습도 90% 환경에서 10일 동안 노출 시 흡착제 무게 대비 약 160%의 수분을 흡수하여 활성탄 등 다른 흡착제와 비교할 때 흡수율이 높았다. MIL-101(Cr)-A를 상대습도 90% 환경에서 일정기간 노출한 시료에 대한 DIMP 흡착량 실험 결과 24시간 이후에는 노출되지 않았을 때 흡착량의 약 40% 수준으로 감소하였으나, 이 흡착량은 상용 방독면 정화통 충진 활성탄과 비교하였을 때 여전히 높은 흡착량으로 추후 방독면 정화통이나 보호의 충진물질로서 활용가능성이 높은 것으로 판단된다.

• 한국환경농학회지
• /
• 제29권4호
• /
• pp.402-407
• /
• 2010

Zerovalent iron (ZVI) is one of the most commonly used metallic reducing agents for the treatment of toxic contaminants in wastewater. Traditional ZVIs are less effective than nanoscale ZVI (nZVI) due to prolonged reaction time. However, the reactivity can be significantly increased by reducing the size of ZVI particles to nanoscale. In this study, nZVI particles were synthesized under laboratory condition and their efficiency in removing hexavalent chromium (Cr(VI)) from aqueous solutions were compared with commercially available ZVI particles. The results showed that the synthesized nZVI particles (SnZVI) reduced >99% of Cr(VI) at the application rate of 0.2% (w/v), while commercial nZVI (CnZVI) particles resulted in 59.6% removal of Cr(VI) at the same application rate. Scanning electron micrographs (SEM) and energy dispersive spectra (EDS) of the nZVI particles revealed the formation of Fe-Cr hydroxide complex after reaction. Overall, the SnZVI particles can be used in treating chromium contaminated wastewater.

• 자원환경지질
• /
• 제42권6호
• /
• pp.549-559
• /
• 2009

연구 목적은 미생물기원으로 추측되는 나선형구조물과 협막구조물에 형성된 침철석과 레피도크로사이트의 광물화작용, 그리고 철수산화물 중에 함유된 중금속함량의 특성을 해석하고자 하였다. 오염된 지하수와 비오염된 지하수의 Cl과 Br의 함량 그리고 Cl/Br의 비율을 이용하여 본 지하수의 오염 정도를 비교해본 결과 인간 활동에 의하여 오염이 진행된 것으로 나타났다. 황갈색 철수산화물을 구성하는 주성분은 $Fe_2O_3$와 $SiO_2$로 나타났다. $Fe_2O_3$ 함량은 58.57wt.%에서 75.73 wt.% 범위이고, $SiO_2$ 함량은 5.8 wt.%에서 16.17 wt.% 범위로 나타났다. 황갈색 철수산화물에 고 함량으로 함유된 중금속원소는 Zn(최대 6,160 mg/kg), Pb(최대 377 mg/kg), U(최대 503 mg/kg), Cr(최대 203 mg/kg) Cu(최대 77 mg/kg), V(최대 162 mg/kg) 및 Ni(최대 105 mg/kg) 등이다. 래스상과 엽편상의 결정들 그리고 침상의 결정들이 나선형구조물과 협막구조물에 발달 돤 것이 관찰되었다. 황갈색 철수산화물에 대한 x-선 회절분석에서 침철석, 석고 및 레피도크로사이트가 관찰되었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.687-693
• /
• 2006

Chromium(III) complexes, cis-[Cr([14]-decane)$(HOC _6H _4COO) _2$]$ClO _4$ I and cis-[Cr([14]-decane)(OH) $(OC _6H _4NO _2)$]$ClO _4{\cdot}H _2O$ II ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) are synthesized and structurally characterized by a combination of elemental analysis, conductivity, IR and VIS spectroscopy, and X-ray crystallography. The complexes crystallizes in the monoclinic space groups, $C2 _1$/a in I and $P2 _1$/n in II. Analysis of the crystal structure of complex I reveals that central chromium(III) ion has a distorted octahedral coordination environment and two hydrogensalicylato ligands are unidentate to the chromium(III) ion via the carboxyl groups in the cis-position. For monomeric complex I the hydrogensalicylato coordination geometry is as follows: Cr-O(average) = 1.984(3) $\AA$;Cr-N range = 2.105(3)-2.141(4) $\AA$;C(24)-O(4) = 1.286(5) $\AA$;N(2)-Cr-N(4) (equatorial position) = 96.97(15)${^{\circ}}$; N(1)-Cr-N(3) (axial position) = 168.27(15)${^{\circ}}$; O(1)-Cr-O(4) = 85.70(13)${^{\circ}}$. The crystal structure of II has indicated that chromium(III) ion is six-coordinated by four secondary amines of the macrocycle, hydroxide anion and nitrophenolate anion.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.350-355
• /
• 2015

To develop ceramic composite anodes of solid oxide fuel cells without metal catalysts, a small amount of barium carbonate was added to an $(La_{0.8}Sr_{0.2})(Cr_{0.5}Mn_{0.5})O_3(LSCM)$ - YSZ ceramic composite anode and its catalytic effects on the electrode performance were investigated. A barium precursor solution with citric acid was used to synthesize the barium carbonate during ignition, while a barium precursor solution without citric acid was used to create hydrated barium hydroxide. The addition of barium carbonate to the ceramic composite anode caused stable fuel cell performance at 1073 K; this performance was higher than that of a fuel cell with $CeO_2$ catalyst; however, the addition of hydrated barium hydroxide to the ceramic composite anode caused poor stability of the fuel cell performance.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.393-399
• /
• 2016

Flower-like nickel oxide (NiO) catalysts were coated on NiCrAl alloy foam using a hydrothermal method. The structural, morphological, and chemical bonding properties of the NiO catalysts coated on the NiCrAl alloy foam were investigated by field-emission scanning electron microscopy, scanning electron microscopy-energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, respectively. To obtain flower-like morphology of NiO catalysts on the NiCrAl alloy foam, we prepared three different levels of pH of the hydrothermal solution: pH-7.0, pH-10.0, and pH-11.5. The NiO morphology of the pH-7.0 and pH-10.0 samples exhibited a large size plate owing to the slow reaction of the hydroxide ($OH^-$) and nickel ions ($Ni^+$) in lower pH than pH-11.5. Flower-like NiO catalysts (${\sim}4.7{\mu}m-6.6{\mu}m$) were formed owing to the fast reaction of $OH^-$ and $Ni^{2+}$ by increased $OH^-$ concentration at high pH. Thus, the flower-like morphology of NiO catalysts on NiCrAl alloy foam depends strongly on the pH of the hydrothermal solution.

• 한국환경과학회지
• /
• 제10권4호
• /
• pp.299-304
• /
• 2001

For the remediation of the contaminated soil with heavy metals, Cd, Cr, Cu, and Pb, the reaction parameters were optimized. Tartaric acid (TA) and oxalic acid(OA) as a washing agent and recovery of metals, The optimum washing conditions of TA and OA were in the ratio of 1 : 20 between soil and acid solution during 2hr reaction under unbuffered pH solutions. At the optimized reaction conditions, the removal efficiencies were compared with that of 0.1 M HCl and ethylenediamine tetraacetic acid(EDTA). TA showed higher efficiency on the removal of Pb than that of EDTA, which established for the remediation of contaminated soil with Pb and Cd metals. The recovery of metal ions from washing solution was achieved by adding calcium hydroxide and sodium sulfide by forming the precipitation of metal hydroxide and metal slfied. Optimum amounts of sodium sulgide and calcium hydroxide were Cd = 25g/$\ell$, Cu = 5~10g/$\ell$ and Pb = 5~10g/$\ell$ for the washing solution of OA and 2~5g/$\ell$ for the washing solution of TA, respectively. The amounts of $Na_2S$ and $CA(OH)_2$ for the tartaric acid was less than that of oxalic acid.

• Journal of Radiation Protection and Research
• /
• 제27권1호
• /
• pp.27-35
• /
• 2002

가압경수로 일차냉각수내 탈염공정의 효과적 운용을 위하여 Amberlite IRN-77 양이온 교환수지의 특성 및 Co(II), Ni(II), Cr(III), Fe(III) 이온의 흡착거동을 연구하였다. 용존 금속이온 농도가 약 $200\;mgL^{-1}$인 용액 100 mL에 대하여 이온교환수지 투입량은 약 0.6 g이 가장 적절하였으며, 이온교환 반응 속도 측정 결과 대부분의 흡착은 반응 1 시간 이내에 신속히 발생하였다. 수지에서의 양이온 교환은 Langmuir 흡착등온선을 잘 따르는 것으로 나타났으나, Fe(III)의 경우, 다른 금속과는 달리 쉽게 평형에 이르지 못하였으며 이는 공기와 오래 접촉한 결과 철산화물 또는 수산화물을 형성하며 용액 중으로부터 침전되기 때문인 것으로 관찰되었다. 전자가가 동일한 Co(II)와 Ni(II)가 동시에 포함된 모의 조제용액에 대하여 흡착실험을 한 결과, 각 이온은 거의 동일한 흡착거동을 보였다. 그러나 전자가가 큰 Cr(III)이 첨가된 경우, 이들은 기존에 수지에 흡착되어 있던 전자가가 낮은 금속들을 탈착시키고 대신 흡착하는 경향을 보였다. 따라서 이온교환수지를 이용한 효과적인 탈염 공정을 위해서는 용존 금속 상호간의 경쟁적 흡착관계의 규명이 필요한 것으로 여겨진다.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.146-153
• /
• 2003

This article describes the metal ions adsorption of chitosan fibers. The chitosan fibers were manufactured by wet spinning using 2% acetic acid as solvent, 10% aqueous sodium hydroxide as non solvent, and 4%chitosan solution as a solvent. The adsorption characteristics of chitosan fibers towards 100ppm solutions of various metal ions such as Cu(II), Cd(II), Cr(III), Hg(II) were examined at different pH value by ICP-Atomic Emission Spectrometer. The adhesiveness of metallic ions to the chitosan fiber were increased with the increase of pH and the decrease of denier. On the other hand, from pH4, chitosan fiber that is immersed in metal ion aqueous solution of Cu(II) and Cd(II) became homogeneous solution because is dissolved. The adhesiveness of metallic ions to chitosan fiber were found to increased in a sequence of Hg(II)> Cr(III)> Cu(II)> Cd(II). The antimicrobial characteristics of the chitosan fiber by adhered metal ions, virgin chitosan fiber, and cotton fiber were evaluated. The antimicrobial activity of the fibers were increased with the decrease of denier.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.124-130
• /
• 1998

This study was to examine the utilization of waste egg snells for removal of heavy metals in laboratory wastewater. It was estimated that pH increasing formed heavy metals into a hydroxide and then settled to remove them. Removal rate of heavy metals were increased as increased dosage, low adsorbate concentration and passed reaction time. Average adsorption volumes of Cr, Cu, Mn and Pb per g were about 1.21 mg, 1.1 mg, 0.96 mg and 1.04 mg, respectively. If we reflected the adsorption capacity(k) and adsorption intensity(1/n) of Freundlich isotherm, we couldn't consider waste egg shells as a good adsorbent. It seemed that heavy metals contained in complex wastewater was removed to be influenced by inital pH, solubilities with passed reaction rime and competitive reaction.