• 한국재료학회지
• /
• 제10권6호
• /
• pp.398-402
• /
• 2000

유도 용해후 열기계적 처리를 거친 3종류의 $Al_3Ti-Cr합금, 즉 Al_{67}Ti_{25}Cr_8,\;Al_{66}Ti_{24}Cr_{10}$ 및 Al_{59}Ti_{26}Cr_{15}에 대해 2.5% NaCl 용액 내에 부삭시험과 1000, 1100 및 $1200^{\circ}C$에서의 고온 산화시험을 실시하였다. 전기화학적 평가결과에서 Cr조성이 증가함에 따라 국부부식에 대한 내식성이 증가하였으며, 부동태 피막의 취성파괴를 방지하였다. XPS결과는 $Al_3Ti-Cr$합금의 부동태 피막은 주로 $Al_2O_3$로 구성되어 있으며, $TiO_2$ 및 $Cr_2O_3$도 공존하고 있음을 알 수 있었다. 고온 내산화성은 모든 시편이 전체적으로 뛰어난 내산화성을 지니고 있었는데, 구체적으로는 $Al_{59}Ti_{26}Cr_{15},\;Al_{66}Ti_{24}Cr_{10}\;및\;Al_{67}Ti_{25}Cr_8$의 순으로 증가하였다. 이는 합금내의 Al 함량이 증가할수록 $Al_2O_3$보호피막의 형성이 용이하였기 때문이었다.

• 자원환경지질
• /
• 제45권2호
• /
• pp.105-119
• /
• 2012

오염환경에 서식하는 토착미생물은 환경정화에 중요한 역할을 담당하며 이 연구는 6가 크롬 오염 지하수에서 분리한 미생물을 이용해 반응성, 이동성, 발암성 높은 6가 크롬을 당대사 조효소인 3가 크롬으로 환원/침전시켜 경제적, 친환경적, 생지화학적 정화의 효율성을 알아보았다. 미생물 농화배양과 조성분석, 호기와 혐기환경의 6가 크롬 환원과 내성, 전자공여체별 6가 크롬 환원, 지화학적 변화, 미생물 외형과 Cr((III) 침전물의 광물특성을 연구한 결과, 분리한 MMPH-0(Enterobacter aerogenes)는 혐기/호기환경에서 6가 크롬 내성과 환원능(유기산 주입 1주 후 70%, 주입 안한 경우 4주 후 10 ~ 20%)이 있고, Eh는 미생물의 유기산 산화로 생성된 전자에 의해 산화에서 환원환경, pH는 중성에서 약산성으로 변화되어 $Cr(OH)_3$/Cr(III)침전물이 형성되었다. SEM/TEM-EDS 결과 $2{\sim}5{\mu}m$ 막대형 미생물과 세포 밖 Cr(III) 침전물은 지화학적 환경변화와 유기산 산화에 따른 전자공여에 의한 환원의 근거가 된다. 지화학적 촉매제 토착미생물의 활성화로 산화환원에 민감한 중금속 오염 지하수 정화에 효율적 기술 응용이 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1625-1631
• /
• 2013

We report a facile synthetic approach of high-quality chromium(III) terephthalate [MIL-101(Cr)] by acetate-assisted method in the absence of toxic HF. Results indicate that the morphology and surface area of the MIL-101(Cr) can be tuned by modifying the molar ratio of acetate/$Cr(NO_3)_3$. The Brunauer-Emmett-Teller (BET) surface area of MIL-101(Cr) synthesized at the optimized condition can exceed 3300 $m^2/g$. It is confirmed that acetate could promote the dissolution of di-carboxylic linker and accelerate the nucleation ratio. So the pure and small size of MIL-101(Cr) with clean pores can be obtained. $CO_2$, $CH_4$ and $N_2$ adsorption isotherms of the samples are studied at 298 K and 313 K. Compared with the traditional method, MIL-101(Cr) synthesized by acetate-assisted method possess enhanced $CO_2$ selective adsorption capacity. At 1.0 bar 298 K, it exhibits 47% enhanced $CO_2$ adsorption capacity. This may be attributed to the high surface area together with clean pores of MIL-101(Cr).

• 한국콘텐츠학회논문지
• /
• 제6권4호
• /
• pp.136-145
• /
• 2006

본 연구는 Cr 투여가 태권도 선수들에게 발차기 횟수, 혈장요소 및 무산소성 파워에 어떠한 영향을 미치는지를 규명하기 위하여 수행되었다. 이를 위하여 남자 고등학교 태권도 선수를 대상으로 위약집단(n=9명), Cr 투여집단(n=9명)으로 구분하여 Cr을 투여한 결과 Cr 투여집단에서만 발차기 횟수, 혈장효소, 무산소성 파워(평균파워, 최대파워)에서 각각 유의하게 증가하였다. 이러한 결과들은 Cr 투여가 태권도 선수들에게 있어서 효과적인 영양 보조물 방법이고, 단기간의 Cr 투여로도 발차기 횟수의 향상에 긍정적인 영향을 미칠 수 있음을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.924-929
• /
• 2004

The microstructure, electrical and dielectric characteristics of $ZnO-{Pr}_6{O}_11-{CoO}-{Dy}_2{O}_3$-based varistors were investigated without and with various metal oxide additives(NiO, MgO, Cr$_2$O$_3$). The average grain size decreased in the range of 18.4 $\backsim$ 11.5 $\mu$m, in order of NiO\longrightarrowMgO\longrightarrow{Cr}_2{O}_3$ and the density decreased in the range of 5.62 \backsim 5.33 $g/{cm}^3$ in order of NiO\longrightarrowCr$_2$O$_3$\longrightarrowMgO. While, the nonlinear exponent increased In the range of 19.8$\backsim$67.4 in order of NiO\longrightarrowMgO\longrightarrow${Cr}_2{O}_3$ and the leakage current decreased in the range of 25.6 $\backsim$ 1.2 $\mu$A in order of NiO\longrightarrow${Cr}_2{O}_3$\longrightarrowMgO. Among all varistors, the Cr$_2$O$_3$-added varistor exhibited the highest nonlinearity, with a nonlinear exponent of 67.4 and a leakage current of 1.2 $\mu$A. Furthermore, this varistor exhibited the lowest dielectric dissipation factor of 0.0407.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1867-1872
• /
• 2012

The 5-parameter Morse potential (5-MP) method for the interaction between O atom and Cr surfaces is constructed in the present work. The adsorption of O on Cr (100), (110), (111), and (211) surfaces are studied with 5-MP in detail. The fourfold hollow site of the Cr (100) surface is favored for O atom. On Cr (110), quasithreefold site is favored with the parallel frequencies (the frequencies of O atom paralleling the metal surface) of 342 and 538 $cm^{-1}$, and perpendicular frequency (the frequency of O atom perpendicular to the metal surface) at 526 $cm^{-1}$. On Cr (111), the most favored mode for O atom is found to be the quasi-threefold site with the perpendicular frequency at 553 $cm^{-1}$ and the parallel frequencies at 253 and 399 $cm^{-1}$. According to our calculation results, we speculate the most preferred mode for O adsorption on Cr (211) surface is the quasithreefold site with the perpendicular frequency at 583 $cm^{-1}$ and the parallel frequencies at 449 and 185 $cm^{-1}$.

• Environmental Engineering Research
• /
• 제10권6호
• /
• pp.294-305
• /
• 2005

The effectiveness of fly ash-, quicklime-, and quicklime-fly ash-based stabilization/solidification(S/S) in chromium(Cr) contaminated soils was investigated using modified semi-dynamic leaching tests. Artificial soil samples composed of kaolinite or montmorillonite contaminated with chromium nitrate(4000 mg $Cr^{3+}\;kg^{-1}$ of solid) were prepared and then subjected to S/S treatment using quicklime, fly ash, or quick lime-fly ash. The effectiveness of the treatment was evaluated by assessing the cumulative fraction of leached $Cr^{3+}$ as well as, by computing the effective diffusivity ($D_e$) and the leachability index (LX) of the treated samples. The reduction in $Cr^{3+}$ release for the untreated samples was more pronounced in the presence of montmorillonite, which was attributed to sorption. Treatment with quicklime, fly ash, or quick lime-fly ash was significantly effective in reducing $Cr^{3+}$ release most probably due to the formation of pozzolanic reaction products and $Cr(OH)_3$ precipitation. The most effective treatment was observed in montmorillonite-sand soil samples treated with quicklime-fly ash (99.8% removal). The mean $D_e$ decreased significantly and the mean LX was greater than 9 for all treated samples, indicating that the treated soils were acceptable for "controlled utilization". The mechanism controlling $Cr^{3+}$ leaching from all treated samples during the first 5 days appeared to be diffusion.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.323-329
• /
• 2014

Effects of sealant and sealing procedure on corrosion resistance of high velocity oxy-fuel (HVOF) sprayed coatings were studied. HVOF-sprayed CrC-20NiCr coatings were sealed using three commercial sealants based on phenolics and epoxy. Penetration depth of sealants, measured by fluorescent microscope technique, was between $19{\mu}m$ and $340{\mu}m$ depending on sealant, sealing condition or sealing procedure. It was found that sealing on rotation status was more effective than that on stationary specimen due to the Coriolis effect of fluid in pores of the coating. From the CASS results, corrosion resistance of properly sealed CrC-20NiCr coatings was equal to that of hexa-valent chromium plating.

• Elastomers and Composites
• /
• 제56권1호
• /
• pp.6-11
• /
• 2021

In order to develop an ultra-high-density elastomeric material for substitution of steel dynamic dampers, a new curing system and technique for high-loading of the filler were examined in this study. Mechanochemical modification of chloroprene rubber (MAH-g-CR) using an internal mixer was carried out with maleic anhydride (MAH) as a reactive monomer. The optimum amount of MAH was 10 phr and the efficient grafting of MAH on CR could be achieved at a mixing temperature of 100℃. After preparing MAH-g-CR, 50 mol% epoxidized natural rubber (ENR 50) was blended with MAH-g-CR to develop a "self-curable rubber blend system" via reaction between the functional groups of the elastomeric matrices without the curing agent and additives. The content of ENR 50 was fixed at 30 wt.% throughout evaluation of the curing behavior of the MAH-g-CR/ENR blend. Tungsten powder was added to the MAH-g-CR/ENR matrix up to 60 vol.% to obtain ultra-high-density, and the maximum density obtained was 7.57 g/㎤. Stable ts2 (scorch time) and t90 (90% cure time) could be obtained even when tungsten powder was incorporated up to 60 vol.%. In addition, the tensile strength and damping properties of MAH-g-CR/ENR containing 60 vol.% of tungsten were better than those of CR containing 60 vol.% of tungsten.

• 한국표면공학회지
• /
• 제42권6호
• /
• pp.272-275
• /
• 2009

The purpose of this study is to show the friction and wear characteristic behaviors of TiN and CrN coated SKD61 which is applied to Al 6xxx extrusion mold material. The friction and wear characteristic behaviors of both coating layers were investigated by the reciprocating friction wear tester under atmospheric pressure and un-lubricated state. The processing parameters in this study were temperature (50 and $120^{\circ}C$) and load (3, 5, and 11 kgf). This study was carried out while comparing the coefficient of friction and microstructure of TiN and CrN coating layers on SKD61. The coefficient of friction of CrN became lower than that of TiN at all conditions. Therefore, CrN was suggested to be more advantageous than TiN for extrusion mold.