• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1473-1478
• /
• 2018

In this study, we have developed a simple and cost-effective method to prevent edge bead formation by covering the edge of a chip-level substrate with heat-resistant tape during patterning using SU-8. Edge beads are a fundamental problem in photoresists and are particularly notable in high-viscosity fluids and thick coatings. Edge beads can give rise to an air gap between the substrate and the patterning mask during UV exposure, which results in non-uniform patterns. Furthermore, the sample may break since the edge bead is in contact with the mask. In particular, the SU-8 coating thickness of the chip-level substrates used in MEMS or BioMEMS may not be properly controlled because of the presence of edge beads. The proposed method to solve the edge bead problem can be easily and economically utilized without the need for a special device or chemicals. This method is simple and prevents edge bead formation on the sample substrate. Despite the small loss in the taping area, the uniformity of the SU-8 coating is improved from 50.9% to 5.6%.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.4
• /
• pp.301-307
• /
• 2004

The flap considered at first for the reconstruction of large maxillary defect, especially mid-face defect, is scapular free flap, because it provides ample composite tissue which can be designed 3-dimensionally for orbital, facial and oral reconstruction. In case of maxillary defect involving hard palate, however, this flap has some limitations. First, its bulk prevents oral function and physio-anatomic reconstruction of nasal and oral cavity. Second, mobility and thickness of cutaneous paddle covering the alveolar area reduce retention of tissue-supported denture and give rise to peri-implantitis when implant is installed. Third, lateral border of scapula that is to reconstruct maxillary arch and hold implants is straight, not U-shaped maxillary arch form. To overcome these problems, new concept of step prefabrication technique was provided to a 27-year-old male patient who had been suffering from a complete hard palate and maxillary alveolar ridge defect. In the first stage, scapular osteomuscular flap was elevated, tailored to fit the maxillary defect, particulated autologous bone was placed subperiosteally to simulate U-shaped alveolar process, and then wrapped up with split thickness skin graft(STSG, 0.3mm thickness). Two months later, thus prefabricated new flap was elevated and microtransferred to the palato-maxillary defect. After 6 months, 10 implant fixtures were installed along the reconstructed maxillary alveolus, with following final prosthetic rehabilitation. The procedure was very successful and patient is enjoying normal rigid diet and speech.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.71-87
• /
• 2007

In this study, 14 heavy snow events in Yeongdong area which are local phenomena are analyzed using MODIS cloud products provided from NASA/GSFC. The clouds of Yeongdong area at observed at specific time by MODIS are classified into A, B, C Types, based on the characteristic of cloud properties: cloud top temperature, cloud optical thickness, Effective Particle Radius, and Cloud Particle Phase. The analysis of relations between cloud properties and precipitation amount for each cloud type show that there are statistically significant correlations between Cloud Optical Thickness and precipitation amount for both A and B type and also significant correlation is found between Cloud Top Temperature and precipitation amount for A type. However, for C type there is not any significant correlations between cloud properties and precipitation amount. A-type clouds are mainly lower stratus clouds with small-size droplet, which may be formed under the low level cold advection derived synoptically in the East sea. B-type clouds are developed cumuliform clouds, which are closely related to the low pressure center developing over the East sea. On the other hand, C-type clouds are likely multi-layer clouds, which make satellite observation difficult due to covering of high clouds over low level clouds directly related with Yeongdong heavy snow. It is, therefore, concluded that MODIS cloud products may be useful except the multi-layer clouds for understanding the mechanism of heavy snow and estimating the precipitation amount from satellite data in the case of Yeongdong heavy snow.

• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.123-131
• /
• 1997

The alternation of light transmissivity of covering films used in most greenhouses over years become of concern. Recently, durable films over 0.1mm in thickness which having 3~5 years life time were popularly used in many greenhouses. However, the films have been replaced yearly with new ones because of lowering light transmittance. The replacement caused negative environmental impact as well as cost increasement. This study was conducted to find fundamental data for developing of a cleaning machine for covering films of greenhouses.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.126-136
• /
• 2009

Purpose: We evaluated the correlation of the anatomic parameters of the acromion those represent on the magnetic resonance image (MRI) of impingement syndrome. Materials and Methods: From June, 2004 to December, 2005, 71 cases were surgically proven to be impingement syndrome, and the anterior acromial hooking angle, the lateral acromial hooking angle (AAHA and LAHA) and the acromial hooking index (AHI: the sum of the AAHA and LAHA) were compared to 16 control cases. At the same period, 55 cases were surgically proven to be partial or full thickness rotator cuff tear, and age, gender and twelve anatomic parameters, including the acromial type, the acromial angle, the anterior covering, the acromial slope, the AAHA, the lateral acromial angle, the acromial torsional angle, the lateral acromial angulation, the LAHA, the lateral covering, the acromiohumeral distance and the AHI were assessed. Results: The AAHA and AHI were increased as impingement syndrome proceeded. The acromial type and acromial angle, and the AAHA, LAHA and AHI showed significant differences between the controls and the rotator cuff tear patients on univariant analysis. On multivariant analysis, gender was most strongly correlated with rotator cuff tear. Age, AAHA and the acromial angle showed similar correlation, respectively. Conclusion: The coronal acromial shape is correlated with rotator cuff tear, and it is important to correct the lateral acromial shape when performing acromioplasty.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1257-1261
• /
• 2006

Pleiomorphic adenoma gene-like1 (PLAGL1) encodes a zinc-finger (ZF) protein with seven ZFs of the C2H2-type which is a regulator of apoptosis and cell cycle arrest, and also regulates the secretion of insulin. In both human and mouse, PLAGL1 is a candidate gene for tumor suppressor and transient neonatal diabetes mellitus (TNDM). In this study, a 2,238 bp fragment covering the complete coding region was obtained and deposited to GenBank (accession number: DQ288899). The reverse transcriptase-polymerase chain reaction (RT-PCR) indicated that PLAGL1 was expressed almost equally in heart, liver, spleen, lung, kidney, stomach, small intestine, skeletal muscle, fat, uterus and ovary. Comparing the sequences of Large White and Meishan pigs, a C-T transition in exon 6 was found. The polymorphism could be detected by TaqI and was genotyped in five purebreds (Large White, Landrace, Meishan, Tongcheng and Bamei). Association analysis was performed between the polymorphism and carcass traits in 276 pigs of a "Large White${\times}$Meishan" F2 resource population. As a consequence, significant associations of the genotypes with shoulder backfat thickness (SFT) and internal fat rate (IFR) were observed. Pigs with TT genotype had low SFT and high IFR compared with TC or CC genotypes.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.232-237
• /
• 2020

In this paper, a compact microstrip-fed dual-band planar antenna for global positioning system (GPS) and mobile handset applications is presented. Dual operating frequency bands are achieved by an open end L-shaped slot and a bent rectangular slot. The proposed antenna is designed and fabricated on the FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm and size of 57 × 57 ㎟. The measured impedance bandwidth (|S₁₁|≤ -10dB) of the fabricated antenna is 60 MHz(1550 ~ 1610 MHz) in the GPS band and 670 MHz (1690 ~ 2360 MHz) in the DCS / IMT-2000 band, covering the required bandwidths for GPS(1570 ~ 1580 MHz) and DCS / IMT-2000 (1710 ~ 2200 MHz) bands. In particular, it has been observed that antenna has a good omnidirectional radiation patterns as well as high gain of 2.36 dBi and its efficiency is more than 90 % over the entire frequency band of interest.

• The korean journal of orthodontics
• /
• v.13 no.2
• /
• pp.193-199
• /
• 1983

The purpose of orthodontic treatment is to produce functional occlusion and to create or maintain facial esthetic harmony. The soft-tissue covering of the face also plays an important role in facial esthetics, speech and other physiologic functions. The study of the soft-tissue profile is important for the planning of orthodontic treatment. The author studied cephalometric X-ray films on 49 patients (23boys, 26 girls) with Angle's class II division 1 malocclusion, ranged from 9 to 13 years of age. Roentgenocephalmetric X-ray films were taken pre and post orthodontic care. Tracings were made in usual manner. The obtained results were as follow. 1. There was no significant sexual difference on mean changes. 2. In the comparison of the soft-tissue thickness changes, Ls-Ls' and Si-Si' in male subjects were remarkable. 9. There were significant correlations between osseous (Ss') change and soft-tissue (Ss) chang, of maxilla in male and female subjects subsequent to orthodontic treatment. 4. The ratios between the protraction of the Ss' and that of the Ss were 1:1.5 in all sexes, the ratios between the Si' and that of the Si were 1:1.4 in male and 1:1.2 in female. 5. There were significant correlations between maxillary central incise. angulation change $({\angle}A)$ and upper lip inclination change $({\angle}B)$ in all sexes. 6. There were little correlations between change in distance difference of Is and Ii and change in distance difference of Ls and Li in all sexes in all sexes.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.2
• /
• pp.165-172
• /
• 2002

A reinforced concrete building neighboring in Pusan or Ulsan where is directly exposed to salt water contrasting with other in land areas contains much salt content percolated from the outside that the high salt content percolates and diffuses through the inside of reinforced concrete; therefore, an immovable tunic surrounding it begins to be destroyed and eroded with high speed. At the time, the cross-sectional area and volume expansion of re-bar reinforcing result in being cracks make a rapid progress gradually until they appear in the surface of the one, the phenomenon such as being a thin layer or falling off the part of it causes a lowering of its durability and might collapse the concrete construction. So far, we've investigated into salt content of reinforced concrete constructions neighboring in a seaside district and damage by carbonation, and we came to a conclusion as follows: $\circled1$ Under the oceanic circumstance a concrete construction is influenced by sea water directly that contains much amount of salt content contrasting with other constructions on inland areas. $\circled2$ Because of chloride penetration the carbonation of reinforced concrete made a rapid progress until more than the covering thickness of re-bar. $\circled3$ An old reinforced concrete building which has been piled up salt injury and proceeding the carbonation of its cross-sectional area. $\circled4$ According to rapidly cracking from the inside to surface of reiforced concrete, the phenomenon of being a thin layer or falling off the part of reinforced concrete results in a lowering of durability and shortening the life-time of concrete construction itself.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.22-28
• /
• 2013

Robotic GMA (Gas Metal Arc) welding process is one of widely acceptable metal joining process. The heat and mass inputs are coupled and transferred by the weld arc to the molten weld pool and by the molten metal that is being transferred to the weld pool. The amount and distribution of the input energy are basically controlled by the obvious and careful choices of welding process parameters in order to accomplish the optimal bead geometry and the desired quality of the weldment. To make effective use of automated and robotic GMA welding, it is imperative to predict online faults for bead geometry and welding quality with respect to welding parameters, applicable to all welding positions and covering a wide range of material thickness. MD (Mahalanobis Distance) technique was employed for investigating and modeling the GMA welding process and significance test techniques were applied for the interpretation of the experimental data. To successfully accomplish this objective, two sets of experiment were performed with different welding parameters; the welded samples from SM 490A steel flats. First, a set of weldments without any faults were generated in a number of repeated sessions in order to be used as references. The experimental results of current and voltage waveforms were used to predict the magnitude of bead geometry and welding quality, and to establish the relationships between weld process parameters and online welding faults. Statistical models developed from experimental results which can be used to quantify the welding quality with respect to process parameters in order to achieve the desired bead geometry based on weld quality criteria.