• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.153-176
• /
• 2000

The U.K. Bills of Lading Act 1855 had sought to circumvent the problems arising from the doctrine of privity of contracts. Among the principal factors in the introduction of the Act was the exceptional decision of the court in the case of Grant Norway. The Act 1855 was intended to reverse Grant Norway, but has no effect whatever. As it was not properly drafted, there had been a lot of situations where the Act 1855 was not applicable. In those cases, the courts have implied a contract between cosignee and carrier. This is the effect of the common law Brandt v. Liverpool doctrine. With the enactment of the Carriage of Goods by Sea Act 1992, all of the problems shall be resolved. It repeals the Act 1855 and replaces it with provisions covering not only B/L but also sea waybills and ship's delivery orders. According to the new law, title to sue is now vested in the lawful holder of a bill of lading, the consignee identified in a sea waybill or the person entitled to delivery under a ship's delivery order, irrespective of whether or not they are owners of the goods covered by the document.

• Speech Sciences
• /
• v.5 no.1
• /
• pp.89-103
• /
• 1999

It is relatively easy to develop a prototype of a Korean language processing system, but it is very difficult to make it an operational system. In this paper, we survey the current status and methodological issues of the Korean language processing systems such as morphological analyzer, parser and machine translator. In most cases, Korean language processing system easily comes to a dead-end state where its performance can not be improved any more. The reason is that it adopts a general algorithm covering similar problems as a whole because specific low-level problems are not clearly defined and their algorithms are unclear. So, when we add some restrictions to solve an individual linguistic problem, they are also applied to other linguistic phenomena as a side effect. It causes a critical problem that the improvement of the algorithm is very difficult. This paper proposes a 2-step paradigm, a divide-and-conquer method by the functional modularization, a simplification method, and an exception handling technique to develop an operational system that does not fall into a dead-end state.

• Electronics and Telecommunications Trends
• /
• v.35 no.7
• /
• pp.56-66
• /
• 2020

As the development of artificial intelligence (AI) technology spreads to various industrial sectors, diversity in AI utilization rapidly increases, creating rich user experience. In addition, AI is required to solve various social problems through the use of public data. The spread of AI utilization across all sectors will continue, covering such industrial and public demands. This article examines the domestic and international trends in AI utilization technologies and establishes the direction of research and development (R&D), which is highly consistent with Korea's AI policy. ETRI, which leads AI's national R&D, has used its experience to establish AI R&D implementation strategies as well as technology roadmaps for the utilization of AI to improve individual quality of life, continuous growth in society, industrial innovation, and the solutions to public societal problems. In addition, it has derived tasks and implementation strategies for developing AI utilization technologies in 10 major areas including medical services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.530-536
• /
• 2017

The purpose of this study is to specify the procedures in problem design to employ BPBL and to design problems for learning subject content. The design of problems is crucial for the effectiveness of BPBL. Ineffective PBL problems could affect whether students acquire sufficient domain knowledge, activate appropriate prior knowledge, and properly direct their own learning. The procedures for designing good problems are composed of selection of educational content, figuring out the learner's characteristics, finding problems, setting roles and situations, and writing down problems. Using the procedures, we designed five integration problems covering the content of an Internet marketing subject. We can foster talent needed on a current industrial site with BPBL, not whole-class learning in a Mongolian engineering college. We made a plan for the Internet marketing subject based on BPBL in the Mongolian engineering college, and focused on the process of designing problems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5242-5247
• /
• 2014

The aim of this study was to specify the procedures of problem design for employing problem based learning (PBL) and designing problems for the learning content of the subject. The procedures for designing good problems are composed of the selection of educational contents, determining the learner's characteristics, identifying problems, setting roles and situations, and writing down problems. Using the procedures, four integration problems covering the contents of a creative engineering design subject were designed. The talent needed in a current industrial site can be fostered with PBL, not whole-class learning. A creative engineering design subject based on PBL was planned, which focused on the process of design problems. To make an effect of this PBL, studies applying this instructional design to many lectures should be implemented.

• Journal of Advanced Marine Engineering and Technology
• /
• v.15 no.3
• /
• pp.57-65
• /
• 1991

The quenching of steels by water is one of the important problems in engineering for the applications of heat treatment or continuous casting process, but the fundamental researches by the theoretical approaches have not been satisfactorily improved yet. The very rapid cooling problems by the thermal conduction including the latent heat of phase transformation in steel and the transient boiling heat transfer of water on the surface of the steel covering from $850^{\circ}C$ to $20^{\circ}C$ are the key problems of heat treatment. The present quenching experiments are performed for the cylindrical specimens of carbon steel, S45C of diameters (12-30). Nonlinear transient heat conduction and transient boiling heat transfer problem of water on the surface of specimens is analyzed by the numerical method of inverse heat conduction problem. The conditions for the calculation are that the initial temperature of specimens is $820^{\circ}C$ and the cooling water in bath are $20^{\circ}C$,$40^{\circ}C$,$60^{\circ}C$,$80^{\circ}C$,$95^{\circ}C$ with no agitation.

• Hwankyungkyoyuk
• /
• v.2 no.1
• /
• pp.100-106
• /
• 1991

Environmental professional education in Korea has been mostly concentrated on the scientific and technological approaches to environmental problems. Many undergraduate majors in environmental engineering or sciences are designed to produce more technical manpowers in environmental fields. Most graduate schools on the environment also place an emphasis on teaching the technical aspects of environmental problems. Some environmental administration related courses, such as environmental law, environmental administration, environmental policy, environmental economics, environmental impact assessments, etc. are partically reflected in some curricula of very limited graduate or undergraduate environment majors. However, teaching environmental administration related courses in science or engineering major institutions has not been successfully carried out so far because lack of interests in such courses by most students and the shortage of competent teachers as well. Furthermore, those courses are not widely accepted by the departments of law, political science, public administration, etc. because their major interests are not in the environment-oriented. Environmental problems cannot be solved by the technical approach along. They should be systematically dealt with through interdisciplinary or multidisciplinary approaches, including natural and social sciences covering all relevant disciplines. in this respect, undergraduate environmental education should preferably cover broader courses on the environment, and the education for environmental professionals, including environmental administration specialists, is preferably handled by graduate schools offering many specialty area courses. Education for environmental administration specialist at graduate level is urgently needed in order to supply the competent manpower at government, business, and private organization levels dealing with environmental administration related problem. This is a new challenging area and the education for such specialists will become more important in the near future than technical manpowers which we ate now concentrating on their education.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.39-48
• /
• 2004

In the 1960s, polluted urban streams were covered and paved in concrete. Rivers became sewers buried under road. As a result, wildlife habitat was lost and the open stream space was gone. In the 1990s, there was a movement for restoring urban streams to enhance the quality of life of inhabitants. Chungkye Stream, whose covering began from early 1950s and ended in 1977, is now in the process of restoration together with the Central Business District (CBD) Redevelopment Plan. However, as the construction proceeds, several problems were raised, and serious controversies resulted. Therefore, this study aims to investigate the validity of the approach of the Chungkye Stream Restoration Project through a literature survey and a site survey, and to present the improved alternative. Ultimately, the study aims to contribute to present references or guidelines for similar urban stream restoration projects. The Chungkye Stream Restoration Project has some of the following problems. First, the construction should be done based on the long-term urban redevelopment plan. Second, the construction period should be extended to restore urban streams. Third, the cultural asset conservation plan should be implemented. In order to fulfill the anticipated purpose, the above mentioned problems need to be solved.

• The Journal of Economics, Marketing and Management
• /
• v.10 no.5
• /
• pp.7-14
• /
• 2022

Purpose: This study discusses efficient operation plans in terms of public rental housing maintenance in terms of LH, a major supplier. Research design, data, and methodology: After reviewing problems related to the maintenance and management of public rental housing discussed in several previous studies, problems in technology setting for repair maintenance costs for public rental housing, lack of public assistance for maintenance and management of public rental housing, management of housing funds, and lack of role of local governments in the supply and repair of public rental housing were derived. Based on this, the researcher conducted using literature research methods to present relevant improvement measures based on reasonable arguments. Results: this study presented four operational plans related to (1) realization of repair costs for public rental housing, (2) a public subsidy system for covering the maintenance costs for public rental housing, (3) efficient operation of the Housing City Fund, and (4) establishment of the public rental housing. This study aims to provide a foundation for the qualitative growth of the domestic public rental housing system. Conclusions: With this study, it is expected that social interest in maintenance of public rental housing centered on LH will be amplified to improve the quality of maintenance problems of public rental housing.