• Journal of Environmental Science International
• /
• v.9 no.6
• /
• pp.505-509
• /
• 2000

The purpose of this study was to evaluate the effects of $Ca(OH)_2$ and $CO_2$ additions on the corrosion of metal coupons(ductile iron, galvanized steel, copper and stainless steel). Corrosion rate and released metal ion concentration of ductile iron and galvanized steel decreased by adjusting alkalinity, calcium hardness and pH with $Ca(OH)_2$ & $CO_2$ additions on copper and stainless steel were less than those on ductile iron and galvanized steel. When ductile iron coupon was exposed to water treated with Ca(OH)$_2$&$CO_2$, additions, the main components of corrosion product formed on its surface were $CaCO_3$ and $Fe_2 O_3 or Fe_2 O_4$ which often reduce the corrosion rate by prohibiting oxygen transport to the metal surface.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.173-176
• /
• 2002

This paper describes the design procedure of composite parts for hingeless hub system of helicopter. These composite parts are composed of flexure and sleeve. The design of this composite flexure is an important technique in hingeless hub system since the rotor system stability and dynamic characteristics depends on this flexure characteristics. The objective of this research is to replace the existing metal hub parts with composite to improve the performance and stability. First, the coupon test of candidate composite material for hub parts was conducted. The hub parts was designed based on test results and the manufacturing possibility by using Fiber Placement System(FPS) was checked. Also the dynamic analysis and stress analysis of composite hub parts was conducted. Through this research, we will find out the possibility of replacing existing metal hub parts with composite.

• The Korean Journal of Financial Management
• /
• v.25 no.1
• /
• pp.85-108
• /
• 2008

In this paper, the fBm interest rate theory is investigated by using Wick integral. The well-known Affine, Quadratic and HJM are derived from fBm framework, respectively. We obtain new theoretical results, and zero coupon bond pricing formula from newly obtained probability measure.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.15-26
• /
• 1996

항공기용 복합재료는 여전히 많은 응용의 여지를 갖고 있으나 또한 시급히 해결하여야 할 많은 기술적인 문제점을 갖고 있다. 즉 복합재료 항공기용 구조물은 반드시 인증 절차를 밟아야 실제 항공기에 장착/판매될 수 있는데 수치해석 기법에 의한 구조해석을 거친 기본/상세 설계과정과 성형 제작된 실물 구조물에 대해 가혹환경 조건하(95% 상대습도, 70.deg. C 온도에서 30일간의 방치)에서 설계에서 제시한 최대 하중의 150%를 견디어야 하는 까다로운 full-scale testing 및 각종 복합재료관련 coupon test(표 7 참조)들을 수행하여야 한다. 이와 같은 기술적인 문제점들은 향후 연구결과에 따라 충분히 극복할 수 있으나 이와 더불어 현재 각각의 항공기 제작사가 보유하고 있는 material specification, design manual, process standard 등의 규격이 전세계적으로 통일될 수 있는 제도적인 보완이 뒷받침 된다면 복합재료의 응용도 훨씬 앞당겨질 수 있을 것으로 예상된다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.84-87
• /
• 2004

Nominal flexural strength of RC members strengthened with FRP sheets is generally based on the tensile strength of composite materials obtained from coupon tests. This method is based on the assumption that bond failure does not occur until the FRP sheet reaches its rupture strength. According to the previous researches, however, bond failure often occurs before the FRP sheet reaches its rupture strength. Some attempts were made to control debonding failure by increasing the bonded length of sheet or wrapping the section around their side of the member(U-wrap). In this study, the flexural failure mechanism of RC beams strengthened with AFRP sheets with different bond lengths is investigated. Their strengthening details to prevent the premature debonding failure are also suggested and its effectiveness is verified.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.16 no.2
• /
• pp.135-151
• /
• 2005

In accordance with changes in life style, people's desire to eat out is getting changed in their preferring factors from whether they can buy food they want to eat fast and easily to mood of the dining space, content and quality of service, hygiene condition of restaurant, quiet location and surrounding circumstance, and discount coupon and price destruction. In addition, consumers who begin to recognize the seriousness of environmental pollution prefer health-oriented food. On the other hand, excessive presence of competitors, growing personnel expense, increasing expenditure in accordance with swelling price of rent and material expenditure, increase of tax burden, decrease of income because of credit card service charge and high expected level by consumers make it difficult for restaurant's owners to manage restaurant business. Therefore, this study purposes to establish development of menu from the consumer's and the supplier's point of view and propose how to develop menu aiming at convenience, health and diversity.

• Journal of Urban Science
• /
• v.7 no.1
• /
• pp.23-27
• /
• 2018

This research was carried out to investigate the corrosion prevention effect in the water distribution system by galvanized zinc-brass pipe which is using potential between brass and zinc. As a result of this study, pH and conductivity of influent were constant in spite of its installation, and it was difficult to estimate the effect of the installation with temporary increased and reduced concentration of Zn and Fe ions, respectively. However, since the corrosion rate of the steel coupon with galvanized zinc-brass pipe was relatively low, it has an effect of inhibiting corrosion.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.325-328
• /
• 2015

NFC란 Near Field Communication의 약자로, 양방향 통신을 지원하는 근거리 통신 방법으로, 저전력, 사용의 편이성 등이 새롭게 각광받고 있는 차세대 통신수단이다. 본 논문에서는 기존의 바코드와 유사한 QR코드와 NFC를 모두 이용하는 모바일 환경에서의 소셜 커머스 결제 시스템을 제안한다. NFC를 사용하여 결제하는 제안된 방식이 기존의 결제 방식에 비하여 간편하고 편의성이 증대됨을 보인다.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.267-272
• /
• 2015

The performance of three tubular materials (C-90, L-80, and N-80) was evaluated in a synthetic brine inoculated with sulfate-reducing bacteria (SRB) in the absence and presence of biocides. A flow loop was used in the evaluation of the three alloys. Morphological examination of the alloy surfaces after exposure to SRB and after biocide treatment was performed by scanning electron microscopy (SEM) to determine the nature of any localized corrosion. The SE images of the coupon samples showed a marked difference between the biocide-treated and untreated samples. Small pits were observed on the ultrasonically cleaned surfaces of the three alloys after exposure to SRB. The biocide treatment reduced the number of SRB on the surfaces of the alloys. Results indicated that C-90 and L-80 alloys exhibited better MIC resistance than N-80 under the conditions used in this study.

• Corrosion Science and Technology
• /
• v.16 no.5
• /
• pp.227-234
• /
• 2017

Reference electrodes are generally implemented for the purpose of monitoring the cathodic protection potentials of buried or immersed metallic structures. In the market, many types of reference electrodes are available for this purpose, such as saturated calomel, silver/silver chloride and copper/copper sulfate. These electrodes contain a porous ceramic junction plate situated in the cylindrical body bottom to permit ionic flux between the internal electrolyte (of the reference electrode) and the external electrolyte. In this work, the copper/copper sulfate reference electrode was modified by replacing the porous ceramic junction plate for a metallic platinum wire. The main purpose of this modification was to avoid the ion copper transport from coming from the inner reference electrode solution into the surrounding electrolyte, and to mitigate the copper plating on the coupon surfaces. Lab tests were performed in order to compare the performance of the two mentioned reference electrodes. We verified that the experimental errors associated with the measurements conducted with developed reference electrode would be negligible, as the platinum surface area exposed to the surrounding electrolyte and/or to the reference electrolyte are maintained as small as possible.