• 한국해양공학회지
• /
• 제19권5호
• /
• pp.1-15
• /
• 2005

The motion behaviors including hydrodynamic interaction and mechanical coupling effects on multiple-body floating platforms are simulated by using a time domain hull/mooring/riser coupled dynamics analysis program. The objective of this study is to evaluate off-diagonal hydrodynamic interaction effects and mechanical coupling effects on tandem moored FPSO and shuttle taker motions. In the multiple-body floating platforms interaction, hydrodynamic coupling effects with waves and mechanical coupling effects through the connectors should be considered. Thus, in this study, the multiple-body platform motions are calculated by Combined Matrix Method (CMM) as well as Separated Matrix Method (SMM). The advantage of the combined matrix method is that it can include all the 6Nx6N full hydrodynamic and mechanical interaction effects among N bodies. Whereas, due to the larger matrix size, the calculation time of Combined Matrix Method (CMM) is longer than the Separated Matrix Method (SMM). On the other hand, Separated Matrix Method (SMM) cannot include the off-diagonal 6x6 hydrodynamic interaction coefficients although it can fully include mechanical interactions among N bodies. To evaluate hydrodynamic interaction and mechanical coupling effects, tandem moored FPSO and shuttle tanker is simulated by Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The calculation results give a good agreement between Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The results show that the Separated Matrix Method (SMM) is more efficient for tandem moored FPSO and shuttle tanker. In the numerical calculation, the hydrodynamic coefficients are calculated from a 3D diffraction/radiation panel program WAMIT, and wind and current forces are generated by using the respective coefficients given in the OCIMF data sheet.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.53-56
• /
• 2005

This paper investigates the effect of ductile deformation behavior of high performance hybrid fiber-reinforced cement composites (HPHFRCCs) on the shear behavior of coupling beams to lateral load reversals. The matrix ductility and the reinforcement layout were the main variables of the tests. Three short coupling beams with two different reinforcement arrangements and matrixes were tested. They were subjected to cyclic loading by a suitable experimental setup. All specimens were characterized by a shear span-depth ratio of 1.0. The reinforcement layouts consisted of a classical scheme and diagonal scheme without confining ties. The effects of matrix ductility on deflections, strains, crack widths, crack patterns, failure modes, and ultimate shear load of coupling beams have been examined. The combination of a ductile cementitious matrix and steel reinforcement is found to result in improved energy dissipation capacity, simplification of reinforcement details, and damage-tolerant inelastic deformation behavior. Test results showed that the HPFRCC coupling beams behaved better than normal reinforced concrete control beams. These results were produced by HPHFRCC's tensile deformation capacity, damage tolerance and tensile strength.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1050-1055
• /
• 2012

The bearing coupling section of machine tools is the most important factor to determine their static/dynamic stiffness. To ensure the proper performance of machine tools, the static/dynamic stiffness of the rotating system has to be predicted on the design stage. Various parameters of the bearing coupling section, such as the spring element, node number and preload influence the characteristics of rotating systems. This study focuses on the prediction of the static and dynamic stiffness of the rotating system with the bearing coupling section using the finite element (FE) model. MATRIX 27 in ANSYS has been adopted to describe the bearing coupling section of machine tools because the MATRIX 27 can describe the bearing coupling section close to the real object and is applicable to various machine tools. The FE model of the bearing couple section which has the sixteen node using MATRIX 27 was constructed. Comparisons between finite element method (FEM) predictions and experimental results were performed in terms of the static and dynamic stiffness.

• 한국전자파학회논문지
• /
• 제21권7호
• /
• pp.734-743
• /
• 2010

본 논문은 다중 도체 전송선 해석법과 chain matrix 알고리즘을 이용하여 twisted cable과 같은 비균일 전송선의 EMP 결합을 해석하였다. 전송선의 EMP 결합 해석을 위해 BLT(Baum-Liu-Tesche) 해석법이 널리 사용되고 있으나, twisted cable과 같은 비균일 전송선에 기존의 BLT 해석법을 바로 적용하기는 어렵다. Twisted cable과 같은 비균일 전송선을 해석하기 위해 수많은 작은 길이의 균일 전송선으로 나누어 모델링하였으며, 전체 비균일 전송선의 결합 특성은 각각의 균일 전송선의 EMP 결합 분석을 통해 최종적인 전송선의 결합 특성을 구함으로 써 가능해진다. 이러한 비균일 전송선 EMP 결합 해석 기법을 검증하기 위해 균일 전송선에 대하여 기존의 BLT 해석 결과와 비교하였으며, 제시된 비균일 전송선 EMP 결합 해석 기법을 지표면 위에 놓여 있는 twisted cable에 적용하여 대기 중의 핵폭발에 의한 HEMP(High altitude Electromagnetic Pulse)와 같은 매우 강한 펄스가 입사되었을 때, 전송선에 연결된 부하에 유기되는 전류(또는 전압) 응답을 분석하였다.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.599-605
• /
• 2003

이중모드 비대칭 canonical 구조 필터는 일반적으로 위성 중계기의 입력 멀티플렉서에 주로 사용된다. 본 논문에서는 비대칭형 canonical 필터의 용이한 합성 방법에 대하여 언급하였다. 비대칭형 canonical 필터의 결합행렬은 대칭형 canonical 필터의 결합 행렬로부터 평면 회전(plane rotation)과 같은 similarity transformation을 이용하여 구하였다. 비대칭형 canonical 필터의 결합 행렬을 구하기 위한 similarity transformation 과정에 있어서 회전 순서, 피벗(pivot), 회전각을 제시하였다. 본 논문에서 제시한 방법을 이용하여 8차 및 10차 비대칭 canonical filter의 결합 행렬을 추출하였으며, 비대칭형 canonical 필터의 주파수 응답 특성은 대칭형 canonical 필터의 주파수 응답 특성과 동일한 특성을 나타내었다.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.691-696
• /
• 2018

We propose an algorithm to update weight to use the mean square error method and mutual coupling matrix in a coherent channel. The algorithm proposed in this paper estimates the desired signal by using the updated weight. The updated weight is obtained by covariance matrix using mean square error and mutual coupling matrix. The MUSIC algorithm, which is direction of arrival estimation method, is mostly used in the desired signal estimation. The MUSIC algorithm has a good resolution because it uses subspace techniques. The proposed method estimates the desired signal by updating the weights using the mutual coupling matrix and mean square error method. Through simulation, we analyze the performance by comparing the classical MUSIC and the proposed algorithm in a coherent channel. In this case of the coherent channel for estimating at the three targets (-10o, 0o, 10o), the proposed algorithm estimates all the three targets (-10o, 0o, 10o). But the classical MUSIC algorithm estimates only one target (x, x, 10o). The simulation results indicate that the proposed method is superior to the classical MUSIC algorithm for desired signal estimation.

• ETRI Journal
• /
• 제28권2호
• /
• pp.223-226
• /
• 2006

This letter presents a new approach to synthesize the resonator filters of an arbitrary topology. This method employs an optimization method based on the relation between the polynomial coefficients of the transfer function and those of the $S_{21}$ from the coupling matrix. Therefore, this new method can also be applied to self-equalized filters that were not considered in the conventional optimization methods. Two microwave filters, a symmetric 4-pole filter with four transmission zeros (TZs) and an asymmetric 8-pole filter with seven TZs, are synthesized using the present method for validation. Excellent agreement between the response of the transfer function and that of the synthesized $S_{21}$ from the coupling matrix is shown.

• Carbon letters
• /
• 제19권
• /
• pp.47-56
• /
• 2016

In this study, the fracture behavior of a thermoplastic-modified epoxy resin reinforced with continuous carbon fibers for two levels of fiber-matrix adhesion was performed. A carbon fiber with commercial sizing was used and also treated with a known silane, (3-glycidoxy propyl trimethoxysilane) coupling agent. Toughness was determined using the double cantilever test, together with surface analysis after failure using scanning electron microscope. The presence of polysulfone particles improved the fracture behavior of the composite, but fiber-matrix adhesion seemed to play a very important role in the performance of the composite material. There appeared to be a synergy between the matrix modifier and the fiber-matrix adhesion coupling agent.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.157-157
• /
• 2000

In the fuzzy control for the multi-variable system, it is difficult to obtain the fuzzy rule. Therefore, the parallel structure of the independent single input-single output fuzzy controller using a pairing between the input and output variable is applied to the multi-variable system. The concept of relative gain matrix is used to obtain the input-output pairs. However, among the input/output variables which are not paired the interactive effects should be taken into account. these mutual coupling of variables affect the control performance. Therefore, for the control system with a strong coupling property, the control performance is sometimes lowered. In this paper, the effect of mutual coupling of variables is considered by tile introduction of a simple compensator. This compensator adjusts the degree of coupling between variables using a neural network. In this proposed neuro-fuzzy controller, the Neural network which is realized by back-propagation algorithm, adjusts the mutual coupling weight between variables.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1067-1069
• /
• 1999

This paper presents a network reduction using weak coupling method. Weak coupling method of identifying coherent generator groups are proposed. The partitioning technique used in this paper is based on a property of sparse matrix factorization. When a matrix has been factorized, a system is divided into study area, boundary buses and external area. A reduction process for external system starts with the load bus elimination and coherent generator aggregation. An identification of coherent generator group, network partitioning and network reduction are presented.